Fujitsu FI-4530C Operator's Manual page 70

■ When Replacing Consumables Immediately
1. Mark the [This message not display again] checkbox. Note that when this checkbox is
marked, it will not be displayed unless you reset the consumables counter.
2. To replace consumables after completing the scanning of all the document sheets in the
ADF, click the [Ignore] button. To abort scanning and replace the consumables immedi-
ately, click the [Cancel] button.
3. Replace the consumables. For details on how to replace consumables, refer to "4.2
Replacing the Pad ASSY" on page 66 and "4.3 Replacing the Pick Roller" on page 70.
■ When Consumables Cannot Be Replaced Immediately
1. To disable display of this message, mark the "This message not display again" checkbox.
Note that when the "This message not display again" checkbox is marked, this message is
not displayed until the consumables counter is reset.
2. To display the message again after scanning 100 sheets, mark the [Warns again after scan-
ning 100 pages] checkbox. To continue scanning of the current document, click the
[Ignore] button. To discontinue scanning, click the [Cancel] button.
3. Replace the consumable when the following message is displayed, or as soon as possible
before the message is displayed, as soon as you can. For details on how to replace con-
sumables, refer to "4.2 Replacing the Pad ASSY" on page 66 and "4.3 Replacing the Pick
Roller" on page 70.
4.1 Consumable and Replacement Cycle
fi-4530CImage Scanner Operator's Guide
4
65