Command Arguments - Matrix Switch Corporation MSC-2HD3216L Product Manual

Error # Message
E01 Token too long
E02 Invalid command
E03 Invalid argument
E04 Invalid destination
E05 Invalid source
E06 Invalid level
E07 Invalid preset
E08 Unterminated string
E09 Backspace limit
reached
E10 Buffer overflow
E11 Serial receive overrun
E12 Unsupported command Command is not supported by the system or current configuration.
E13 I/O Error
Table 4: Error Codes

3.6 Command Arguments

Command arguments are separated into two categories: numeric and string arguments. These are further
explained in Table 5.
Numeric
Decimal (123) 1 to 3 decimal digits
Hex (0x3D) 0xNN where NN are 2 hex digits
from 0-9, A-F or a-f
Table 5: Basic Argument Types
Arguments are shown in the Help command output surrounded by square brackets '[Arg]' or parenthesis '(Arg)'.
Square brackets indicate an optional argument and parenthesis indicate a required argument. Any optional
argument specified requires that all prior optional arguments are also specified. Table 6 lists currently used
command argument types.
Argument Valid Range
Boolean 0/1, T/F, True/False Boolean true or false value.
Cmd String
Cond String
Dest 1-N
Page 22 of 60
MSC-2HD3216L Product Manual
Description
A command name or string argument was too long.
Invalid command name.
One or more invalid argument values.
Invalid matrix destination number.
Invalid matrix source number.
Invalid matrix level number.
Invalid preset number.
Double or single quoted string not terminated.
Devices have a limited backspace buffer size, if too many characters are
backspaced and then more characters are appended, this error will occur.
Data exceeds maximum buffer length.
One or more characters were lost on the serial interface.
Firmware 5.3.0 and newer.
A general I/O error occurred.
Meaning
MASCOT command.
Condition statement. See
Destination number (N = Count of destinations)
© 2013-2018 Matrix Switch Corporation
String
Unquoted Commands with string arguments
automatically interpret argument as
string (spaces and commas not
allowed).
Double quoted One or more characters surrounded
by double quotes ("An Argument").
Single quoted One or more characters surrounded
by single quotes ('An Argument').
PanelCond C ommand .
www.matrixswitch corp.com