Remote Commander And Control Panel - Sony VPL-FHZ75 Operating Instructions Manual

Remote Commander and Control Panel

Remote Commander
Control Panel
a ? (On) key/1 (Standby) key
Turns on the projector or enters the
standby mode.
b INPUT key/Direct input select
keys
Select an input signal (page 16).
Select the VIDEO (VIDEO IN) signal
with the INPUT key.
The E, F, and G keys are not used with
this projector.
c TWIN (Twin Picture) key
Simultaneously projects images from
two input signals on the screen as a main
picture and subpicture (page 22).
d PICTURE MODE key
Switches the "Picture Mode" setting
(page 25).
Note
When "Intelligent Setting" in the
Projection Setting menu is set to "On,"
"Picture Mode" cannot be set
e MENU key/ENTER key/V/v/B/b
(arrow) keys/RETURN key/
RESET key
Used for menu operation (page 24).
f FOCUS key
Used when the electric focus lens is
attached (page 17).
ZOOM key
Used when the electric zoom lens is
attached (page 17).
LENS SHIFT/SHIFT key (page 17)/
PATTERN key (page 18)/
KEYSTONE key (page 18)
Used for adjusting the projected image.
g VOLUME key
Adjusts the volume output from the
audio output terminal of the projector.
h ASPECT key
Changes the aspect ratio of the projected
image (page 30).
i APA (Auto Pixel Alignment) key
Automatically adjusts a picture to its
clearest while a signal from a computer
is input via the RGB input terminal
(INPUT A). You can cancel the
adjustment by pressing the APA key
again while adjusting.
6
(page 25)
.