HBBTV System............ 32 Contents Smart Center ............33 Safety Information ..........2 Markings on the Product........2 Environmental Information........4 Features ..............6 Accessories Included..........6 Standby Notifications ..........6 TV Control & Operation ......... 6 Inserting the Batteries into the Remote ....7 Connect Power .............
• Do not place any heat sources such as electric Safety Information heaters, radiators, etc. near the TV set. • Do not place the TV on the floor and inclined CAUTION surfaces. • To avoid danger of suffocation, keep plastic bags RISK OF ELECTRIC SHOCK out of the reach of the babies, children and domestic DO NOT OPEN...
Page 4
WARNING WALL MOUNTING WARNINGS Do not ingest the battery, Chemical Burn Hazard This product or the accessories supplied with the • Read the instructions before mounting your TV product may contain a coin/button cell battery. If on the wall. the coin/button cell battery is swallowed, it can ca- •...
Environmental Information This television is designed to be environment friendly. To reduce energy consumption, you can follow these steps: If you set the Energy Saving to Minimum, Medium, Maximum or Auto the TV will reduce the energy consumption accordingly. If you like to set the Backlight to a fixed value set as Custom and adjust the Backlight (located under the Energy Saving setting) manually using Left or Right buttons on the remote.
Page 6
Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation.
Ultra HD contents are function and control refer to the full manual on our supported from HDMI, USB inputs and over DVB-T2 the website at http://www.toshiba-tv.com and DVB-S2 broadcasts. Standby Notifications • Remote controlled colour TV If the TV does not receive any input signal (e.g.
Operation with the Remote Control Antenna Connection Press the Menu button on your remote control to Connect the aerial or cable TV plug to the AERIAL display main menu screen. Use the directional buttons INPUT (ANT-TV) socket or satellite plug to the to select a menu tab and press OK to enter.
This product contains technology subject to certain Notification intellectual property rights of Microsoft. Use or TRADEMARK ACKNOWLEDGMENT distribution of this technology outside of this product The terms HDMI and High-Definition Multimedia is prohibited without the appropriate license(s) from Interface, and the HDMI Logo are trademarks or Microsoft.
Remote Control Standby: Switches On / Off the TV Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen. Quick Menu: Displays a list of menus for quick access Mute: Completely turns off the volume of the TV Volume +/- Menu: Displays TV menu Directional buttons: Helps navigate menus, content...
Connections Connector Type Cables Device See the illustrations on the left side. To enable PC/YPbPr audio, Scart you will need to use the back Connection audio inputs with a YPbPr/PC (back) audio cable for audio connection. YPBPR If an external device is connected via the SCART socket, the TV YPbPr Video may automatically switch to...
Before satellite search is performed some settings Switching On/Off should be made. Before the satellite search starts, To Switch the TV On a menu will be displayed where you can select to start a Fransat installation. Set the Install Type as Connect the power cord to a power source such as a Operator and than set the Satellite Operator as the wall socket (220-240V AC, 50 Hz).
available in System>Settings>More menu and can Media Playback via USB Input be turned off/on later. You can connect 2.5” and 3.5” inch (hdd with external power Press OK button on the remote control to continue supply) external hard disk drives or USB memory stick to your and the Network/Internet Settings menu will be TV by using the USB inputs of the TV.
Recorded programmes are split into 4GB partitions. Watching Recorded Programmes If the writing speed of the connected USB disk is not Select Recordings from the Media Browser menu. sufficient, the recording may fail and the timeshifting Select a recorded item from the list (if previously feature may not be available.
To terminate this operation and control the TV via Loop/Shuffle Mode Operation the remote again, press Quick Menu button on the All files in the list will be remote, highlight the CEC RC Passthrough and Start playback with the Play continuously played in original set as Off by pressing Left or Right button.
TV Menu Contents System - Picture Menu Contents You can change the picture mode to suit your preference or requirements. Picture mode can Mode be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural. Contrast Adjusts the light and dark values on the screen. Brightness Adjusts the brightness values on the screen.
Page 17
System - Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode. Balance Adjusts whether the sound comes from the left or right speaker. Sets headphone volume. Headphone Please ensure before using headphones that the headphone volume is set to a low level, to prevent damage to your hearing.
Page 18
System - Settings Menu Contents Conditional Access Controls conditional access modules when available. Language You may set a different language depending on the broadcaster and the country. Enter correct password to change parental settings. You can easily adjust Menu Lock, Maturity Lock, Child Lock or Guidance in this menu. You can also set a new PIN or change the Default CICAM PIN using the related options.
Page 19
This setting configures the power up mode preference. Last State and Standby Power Up Mode options are available. Virtual Remote Enable or disable the virtual remote feature. With this setting you can enable and disable CEC functionality completely. Press Left or Right button to enable or disable the feature.
Internet Lock: If this option is set to ON, the open General TV Operation browser application in the portal will be disabled. Set Using the Channel List to OFF to release the application again. The TV sorts all stored stations in the Channel List. Set PIN: Defines a new PIN number.
Event Details (Info button): Displays detailed Teletext Services information about selected programmes. Press the Text button to enter. Press again to activate Filter (Text button): Views filtering options. mix mode, which allows you to see the teletext page and Next Time Slice (Green button): Displays the the TV broadcast at the same time.
Troubleshooting & Tips PC Input Typical Display Modes Tv will not turn on The following table is an illustration of some of the typical video display modes. Your TV may not support Make sure the power cord is plugged in securely to a all resolutions.
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not supplied), you can refer to the following resolution information. 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz 640x480 þ þ 800x600 þ þ...
Configuring Wired Device Settings Connectivity Network Type The Network Type can be selected as Wired Device, Wired Connectivity Wireless Device or Disabled, in accordance with the To Connect to a Wired Network active connection to the TV set. Select this as Wired •...
Page 29
Connecting to your mobile device via WiFi • The transmission speed differs depending on the distance and number of obstructions between the • If your mobile device has WiFi feature, you can connect transmission products, the configuration of these it to your TV via a router, in order to access the content products, the radio wave conditions, the line traffic in your device.
Page 30
The requirements for any country may change at any time. displayed. Select the device you want to connect from It’s recommended that user checks with local authorities the list and press the OK button to connect. If “Device for the current status of their national regulations for both connected”...
Page 31
the domain is invalid, this might cause problems while Connectivity Troubleshooting browsing files in Audio Video Sharing mode. Wireless Network Not Available Using Audio Video Sharing Network Service • Ensure that any firewalls of your network allow the Audio Video Sharing feature uses a standard that eases TV wireless connection.
Nero MediaHome Installation or web content with defined short-cuts. Whether you can view this content without interruption depends To install Nero MediaHome, please proceed as on the connection speed provided by your internet follows: service provider. Note: The Audio Video Sharing feature cannot be used if Press the Internet button on your remote control the server programme is not installed onto your PC or if the required media server software is not installed onto the...
add to the Speed Dial list, highlight the Opera- button to open the application page. After the page button and press the OK button. Then highlight Add is displayed you can go back to the initial red button to Speed Dial option in the submenu and press the icon state by pressing the red button again.
by the application. For example, numeric channel TV: You can watch content through the TV tab. In selection may not work on a teletext application this mode you can navigate through the channel list where the numbers indicate teletext pages. retrieved from your TV and click on thumbnails to view the detail pages.
Page 35
Note: Not all image file formats are supported. This function our website. will not work if Audio Video Sharing feature is not supported. Portal Launcher www.toshiba-tv.com To access the Portal Launcher( ) widget tap on the Up-arrow on the bottom left side of the screen.