Table of Contents
Advertisement
Hotel TV Function
No
Category
Network Setup
SmartHub Model
16
Network
SmartHub Setting
Widget Mode
Solution Type
Server URL Setting
License Server IP
Widget
17
IPTV Mode
Solution
Virtual Standby
Instant On
Room Num Setting
Door Eye Mode
Door Eye Source
18
Door Eye
Prompt OSD
Source Return
Self Diagnosis
19
System
Self Diagnosis for
SW Update
Service Pattern
Sound Bar Out
Contact Samsung
− If user edit extermal source to channel list, when TV power on by external source, TV does not show my channel OSD after power on. In
menu, the broadcast item is dim, user can choose genre mode by channel list.
− When TV in the PC source, Apply picture Mode Keeps dim.
− If the hotel does not use cable and air antenna both, the Mix Channel Map option should be set as "Off".
initial value
Setting
OFF
...
...
...
Setting
...
...
...
...
OFF
...
...
...
Time
for TV
HTV
OFF
OFF
TV Reset
Description
Set IP address to establish Internet connection.
Set Hotel ID
Enter to Smart Hub setting interface.
Widget Mode On and Off.
Select the solution type (It depends on model -Vendor Server, SINC Server).
Setting the server URL.
Setting the server IP.
Use the IPTV mode (it depends model - Only IPTV model support it).
Use the virtual standby mode or not.
When Virtual Standby On, TV power consumption will be 9.5W to 17.4W
(Depends on inches).
The fast TV booting mode On/Off.
Setting Room Number.
Door Eye function ON and OFF.
Select the source that will display the door image (Source selection is AV).
Prompt OSD mode ON and OFF.
− On: The OSD which is asking if you want the output will be displayed.
y If the user press 'Yes', door image will be displayed in PIP or Full screen.
y If the user press 'No', Door Eye function will not work.
− Off: OSD will not be displayed and automatically changed to PIP or Full size
screen.
Setting the time that decide how long will be displayed the door image.
Enter Self Diagnosis Menu.
− Picture Test: Use to check for picture problems. If the problem appears in
the test picture, select Yes and follow the directions on the screen.
− 3D Picture Test: Use to check for 3D picture problems. If the problem
appears in the test picture, select Yes and follow the directions on the
screen.
− Sound Test: Use the built-in melody sound to check for sound problems. If
the problem occurs during the test, select Yes and follow the directions on
the screen.
− Channel information: check up every channel information.
− Reset: Self Diagnosis for TV state reset.
HD Function Check Menu On Executing Item Below OSD is diaplayed.
− STB SI Vendor Setting: SI Name Success/Failure
− Bathroom AMP: Success/Failure
− RTC: Success/Failure
SW USB Update function.
Same function with SVC Service Pattern.
− ON: TV speaker sound will be mute. Sound will come out through HDMI.
You must connect the Sound Bar to hear the sound(HDMI3).
− OFF: Sound will come out through TV speakers normally.
Samsung Contac information.
Factory reset.
31
English
Advertisement
Table of Contents
