Table of Contents
Advertisement
11.
Welcome Logo
Once this feature is configured and set, the welcome image will be displayed within 14 seconds after switch ON. This
page will remain until a key on the RC is pressed.
How to upload Welcome Logo
1. Create a graphics file: 960 x 540.png with the logo. Follow the next guidelines:
Maximum size of the welcome logo should be less than 1024 Kb.
Always use 16 bit color depth.
2. File name: hotel_wel.png (File name is case-sensitive)
3. Create a folder named "VES151HE_CLONE00001\welcome_image" on your USB key.
4. Save the image into the "welcome_image" folder on you USB key.
5. Insert the USB device into TV.
6. Enter the Hotel Mode.
8. Make sure that option Welcome screen is set to ON
7. Select the option: Copy from USB. Select the folder if you have multiple files on USB flash drive. TV will copy the
file and restart.
Note: For the welcome picture, there is a color lookup table used that is limiting the number of colors available to
display. This can result in certain display color artifacts and using a limited number of different color values can
improve this. Once this feature is configured and set the welcome image will be displayed within 14 seconds after
switch on. This page will remain until a key on the RC is pressed.
26
Advertisement
Table of Contents
