Page 1 G7000 series Online Manual English...
Page 2: Table Of Contents
Contents Using Online Manual..........11 Symbols Used in This Document.
Page 3 Loading Documents in the ADF (Auto Document Feeder)........91 Loading Based on Use.
Page 4 Main Components..............156 Front View.
Page 5 Printing Using Canon Application Software........
Page 6 Preparing for Faxing........... . . 263 Connecting Telephone Line.
Page 7 Document Stored in Printer's Memory..........329 Printing Document in Printer's Memory.
Page 8 Network Key (Password) Unknown..........369 Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings.
Page 9 Poor Quality Fax Received............425 Mechanical Problems.
Page 10 5100..............476 5200.
Page 11: Using Online Manual
Using Online Manual Operating Environment Symbols Used in This Document Touch-enabled Device Users (Windows) Printing Online Manual Trademarks and Licenses Screenshots in This Manual...
Page 12: Symbols Used In This Document
Symbols Used in This Document Warning Instructions that, if ignored, could result in death, serious personal injury, or property damage caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or property damage caused by incorrect operation of the equipment.
Page 13: Touch-Enabled Device Users (Windows)
Touch-enabled Device Users (Windows) For touch actions, you need to replace "right-click" in this document with the action set on the operating system. For example, if the action is set to "press and hold" on your operating system, replace "right-click" with "press and hold."...
Page 14: Trademarks And Licenses
(1998) are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. and licensed to Canon Inc. • Autodesk and AutoCAD are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries.
Page 15 Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
Page 16 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3.
Page 17 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE.
Page 18 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Page 19 Use is subject to license terms below. This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 20 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 6: Cisco/BUPTNIC copyright notice (BSD) ----- Copyright (c) 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and Telecommunications.
Page 21 SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Page 22 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Page 23 MIT License Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:...
Page 24 CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. (1) Red Hat Incorporated Copyright (c) 1994-2009 Red Hat, Inc. All rights reserved. This copyrighted material is made available to anyone wishing to use, modify, copy, or redistribute it subject to the terms and conditions of the BSD License.
Page 25 The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license.
Page 26 The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below. 1. No Warranty -------------- THE FREETYPE PROJECT IS PROVIDED `AS IS' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Page 27 Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in this list if you haven't found anything to help you in the documentation. o freetype-devel@nongnu.org Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.
Page 28 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
Page 29: Basic Operation
Basic Operation Printing Photos from a Computer Printing Photos from a Smartphone/Tablet Copying Faxing...
Page 30: Printing Photos From A Computer
Printing Photos from a Computer This section describes how to print photos with Easy-PhotoPrint Editor. 1. Open rear tray cover (A). Pull straight up and fold back paper support (B). 2. Open the feed slot cover (C). 3. Slide right paper guide (D) to open both paper guides. 4.
Page 31 5. Slide right paper guide (D) to align with both sides of paper stack. 6. Close feed slot cover (C) gently. After closing the feed slot cover, the paper information registration screen for the rear tray appears on the LCD.
Page 32 7. Press the OK button. 8. Use the button to select the size of the loaded paper on the rear tray, then press the OK button. Note • The (asterisk) on the LCD indicates the current setting. 9. Use the button to select the type of the loaded paper on the rear tray, then press the OK button.
Page 33 From the Start menu, select (All apps >) Canon Utilities > Easy-PhotoPrint Editor. For macOS: From the Go menu in Finder, select Application and double-click the Canon Utilities folder, the Easy- PhotoPrint Editor folder, and then the Easy-PhotoPrint Editor icon.
Page 34 15. Specify number of copies and other options under Print Settings (L). For Windows: Specify the number of copies, your model name, the paper size, and other options. For macOS: Specify the number of copies, the paper size, and other options. Note •...
Page 35 Note • Easy-PhotoPrint Editor lets you easily create and print original collages, cards, or calendars using your favorite photos. Easy-PhotoPrint Editor Guide...
Page 36: Printing Photos From A Smartphone/Tablet
Printing Photos from a Smartphone/Tablet This section describes how to print photos with Canon PRINT Inkjet/SELPHY. For details on how to download Canon PRINT Inkjet/SELPHY, see below. Print Photos from Your Smartphone 1. Open rear tray cover (A). Pull straight up and fold back paper support (B).
Page 37 5. Slide right paper guide (D) to align with both sides of paper stack. 6. Close feed slot cover (C) gently. After closing the feed slot cover, the paper information registration screen for the rear tray appears on the LCD.
Page 38 10. Open operation panel (E), pull out paper output tray (F), and then open output tray extension (G). Be sure to open the operation panel before printing. If the operation panel is close, the printer does not start printing. 11. Start (Canon PRINT Inkjet/SELPHY) from your smartphone/tablet. 12. Select Photo Print on Canon PRINT Inkjet/SELPHY.
Page 39 The list of photos saved on your smartphone/tablet is displayed. 13. Select a photo. You can also select multiple photos at once. 14. Specify the number of copies, paper size, etc. 15. Start printing.
Page 40: Copying
Copying This section describes how to load originals and copy them to plain paper loaded in the cassette. 1. Pull out the cassette (A) from the printer. 2. Slide paper guides (B) in front and (C) on right to open guides. 3.
Page 41 5. Insert cassette into printer. After inserting the cassette into the printer, the paper information registration screen for the cassette appears on the LCD. 6. Press the OK button. 7. Use the button to select the size of the loaded paper in the cassette, then press the OK button.
Page 42 Note • The (asterisk) on the LCD indicates the current setting. 8. Check media type and press OK button. Follow the instructions of any messages displayed to register the paper information. 9. Open operation panel (D), pull out paper output tray (E), and then open output tray extension (F).
Page 43 Note • To copy two or more documents continuously, load them in the ADF (Auto Document Feeder). Loading Documents in the ADF (Auto Document Feeder) 13. Close the document cover gently. 14. Check paper settings and press Black button (J) or Color button (K).
Page 44 Important • Do not open the document cover until copying is complete. Note • Your printer is equipped with many other convenient copy features. Copying...
Page 45: Faxing
Faxing Fax multiple documents in black and white as follows. 1. Open the document tray (A). 2. Slide the document guide (B) all the way out. 3. Insert the document WITH THE SIDE TO SCAN FACING UP. 4. Align document guide (B) with document width.
Page 46 5. Press the FAX button (C). 6. Use the Numeric buttons (D) to enter the fax number. 7. Press the Black button (E). Note • Many other convenient faxing features are available. Faxing...
Page 47: Network
Network Available Connection Methods The following connection methods are available on the printer. • Wireless Connection Connect the printer and devices (e.g. computer/smartphone/tablet) using a wireless router. If you have a wireless router, we recommend you use one for wireless connection. ◦...
Page 48 Note • You can connect the printer and computer using a USB cable (USB connection). Prepare a USB cable. For details, see Connects to Another Computer via LAN/Changes from USB to LAN Connection. Network Connection Settings/Setup Perform connection setup for the printer and computer/smartphone/tablet. For more on setup procedure, click here.
Page 49 Notice/Restriction See below for details. • Restrictions on network settings: Restrictions • Notices when printing using web service: Notice for Web Service Printing...
Page 50: Restrictions
Restrictions When connecting another device while a device (such as a computer) is already connected to the printer, connect it using the same connection method as the connected device. If you connect using a different connection method, the connection to the device in use will be disabled. Connection Using a Wired Network cannot be performed on printers that do not support a wired connection.
Page 51 • If you connect a device and the printer using Wireless Direct, Internet connection may become unavailable depending on your environment. In that case, web services for the printer cannot be used. • In Wireless Direct mode, you can connect up to five devices at the same time. If you try to connect a sixth device while five devices are already connected, an error will appear.
Page 52: Network Connection Tips
Network Connection Tips Default Network Settings Detect Same Printer Name Connects to Another Computer via LAN/Changes from USB to LAN Connection Printing Network Settings Reconfiguration Method of LAN Connection/Reconfiguration Method of Wi-Fi Connection...
Page 53: Default Network Settings
XXXXXXXXXXXX Enable/disable IPv6 Enable Enable/disable WSD Enable Timeout setting 15 minutes Enab./disab. Bonjour Enable Service name Canon G7000 series LPR setting Enable RAW protocol Enable LLMNR Enable PictBridge commun. (Enable/disable) Enable DRX setting (Wired LAN) Enable ("XX" represents alphanumeric characters.) * Default value depends on printer.
Page 54 Confirm request Displayed *1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is specified when the printer is turned on for the first time.) *2 The password is specified automatically when the printer is turned on for the first time.
Page 55: Detect Same Printer Name
Detect Same Printer Name When the printer is detected during setup, plural printers with the same name may appear on the results screen. Select a printer with checking the printer settings against those on detection result screen. • For Windows: Check the printer's MAC address or serial to select the correct printer from the results.
Page 56: Connects To Another Computer Via Lan/Changes From Usb To Lan Connection
Connects to Another Computer via LAN/Changes from USB to LAN Connection To connect an additional computer to the printer via LAN, or to change from USB to LAN connection, click here and perform setup.
Page 57: Printing Network Settings
Network Diagnostics Network diagnostics – Diagnostic Result Diagnostic result XXXXXXXX Result Codes Result codes XXXXXXXX Result Code Details Result code details http://canon.com/ijnwt Wireless LAN Wireless LAN Enable/Disable Infrastructure Infrastructure Enable/Disable 3-2-1 Signal Strength Signal strength 0 to 100 [%] 3-2-2...
Page 58 3-2-3 Frequency Frequency XX (GHz) 3-2-4 MAC Address MAC address XX:XX:XX:XX:XX:XX 3-2-5 Connection Connection status Active/Inactive 3-2-6 SSID SSID Wireless LAN network name (SSID) 3-2-7 Channel Channel XX (1 to 13) 3-2-8 Encryption Encryption method none/WEP/TKIP/AES 3-2-9 WEP Key Length WEP key length (bits) Inactive/128/64 3-2-10...
Page 59 3-2-26 Default Gateway1 Default gateway 1 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-27 Default Gateway2 Default gateway 2 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-28 Default Gateway3 Default gateway 3 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-29 Default Gateway4 Default gateway 4 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-33 IPsec IPsec setting Active/Inactive 3-2-34 Security Protocol Security method ESP/ESP &...
Page 60 MAC Address MAC address XX:XX:XX:XX:XX:XX Connection Wired LAN status Active/Inactive TCP/IPv4 TCP/IPv4 Enable/Disable IP Address IP address XXX.XXX.XXX.XXX Subnet Mask Subnet mask XXX.XXX.XXX.XXX Default Gateway Default gateway XXX.XXX.XXX.XXX TCP/IPv6 TCP/IPv6 Enable/Disable Link Local Address Link local address XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX Link Local Prefix Link local prefix length Length 4-10...
Page 61 4-21 Default Gateway4 Default gateway 4 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 4-25 IPsec IPsec setting Active/Inactive 4-26 Security Protocol Security method ESP/ESP & AH/AH 4-27 Wired LAN DRX Discontinuous recep- Enable/Disable tion (wired LAN) Other Settings Other settings – Printer Name Printer name Printer name (Up to 15 alphanumeric characters) Wireless Direct Dev- Device name for wire-...
Page 62 ("XX" represents alphanumeric characters.)
Page 63: Reconfiguration Method Of Lan Connection/Reconfiguration Method Of Wi-Fi Connection
Reconfiguration Method of LAN Connection/Reconfiguration Method of Wi-Fi Connection Reconfiguration Method of LAN Connection Reconfiguration Method of Wi-Fi Connection Reconfiguration Method of LAN Connection Follow either procedure below to change LAN connection method (wired or Wi-Fi). • For Windows: ◦ Click here and redo setup. ◦...
Page 64: Ij Network Device Setup Utility (Macos)
IJ Network Device Setup Utility (macOS) IJ Network Device Setup Utility Starting Up IJ Network Device Setup Utility Diagnosing and Repairing Network Settings List of Models Which Does Not Support Diagnosis and Repair Function...
Page 65: Ij Network Device Setup Utility
IJ Network Device Setup Utility If anything is wrong with connection, IJ Network Device Setup Utility diagnoses the settings of the printer and those of computer on which it is installed. In addition, IJ Network Device Setup Utility restores the status of the printer and computer.
Page 66: Starting Up Ij Network Device Setup Utility
Starting Up IJ Network Device Setup Utility Start up Launchpad, select Canon Utilities, and then select IJ Network Device Setup Utility. When you start up IJ Network Device Setup Utility, the screen below appears. Enter the password specified for your computer and select Install Helper. IJ Network Device Setup Utility starts diagnosis and repair of network.
Page 67: Diagnosing And Repairing Network Settings
Diagnosing and Repairing Network Settings IJ Network Device Setup Utility diagnoses and repairs computer settings or connection between the computer and printer when a problem (e.g. cannot print from a printer on the network) occurs. Important • Some models do not support diagnosis and repair function. For details: List of Models Which Does Not Support Diagnosis and Repair Function IJ Network Device Setup Utility starts checking the computer settings when it starts up.
Page 68: List Of Models Which Does Not Support Diagnosis And Repair Function
List of Models Which Does Not Support Diagnosis and Repair Function The following models does not support "Diagnose and Repair" function of IJ Network Device Setup Utility. • G4000 series • PRO-500 series • PRO-1000 series • MB2100 series • MB2700 series •...
Page 69: Handling Paper, Originals, Ink Tanks, Etc
Handling Paper, Originals, Ink Tanks, etc. Loading Paper Loading Originals Refilling Ink Tanks...
Page 70: Loading Paper
Loading Paper Paper Sources Loading Paper in the Rear Tray Loading Paper in the Cassette Loading Envelopes in Rear Tray...
Page 71: Paper Sources
Paper Sources The printer has two paper sources for feeding paper, the rear tray (A) and cassette (B). You can load all supported paper on the rear tray. Supported Media Types You can load A4, B5, A5, or Letter-sized plain paper in the cassette. Note •...
Page 72: Loading Paper In The Rear Tray
For details on the Canon genuine paper, see Supported Media Types. • You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour Paper SAT213. For the page size and paper weight you can use for this printer, see Supported Media Types.
Page 73 3. Open the feed slot cover (C). 4. Slide right paper guide (D) to open both paper guides. 5. Load paper stack in portrait orientation WITH PRINT SIDE FACING UP.
Page 74 6. Slide right paper guide (D) to align with both sides of paper stack. Do not slide the paper guides too hard against the paper. The paper may not be fed properly. Important • Always load paper in portrait orientation (E). Loading paper in landscape orientation (F) can cause paper jams.
Page 75 7. Close feed slot cover (C) gently. Important • If the feed slot cover is open, paper cannot be fed. Be sure to close the feed slot cover. After closing the feed slot cover, the paper information registration screen for the rear tray appears on the LCD.
Page 76 Note • The (asterisk) on the LCD indicates the current setting. 10. Use the button to select the type of the loaded paper on the rear tray, then press the OK button. Follow the instructions of any messages displayed to register the paper information. 11.
Page 77: Loading Paper In The Cassette
Note • In the cassette, be sure to load only plain paper. • You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour Paper SAT213. For the page size and paper weight you can use for this printer, see Supported Media Types.
Page 78 3. Slide paper guides (B) in front and (C) on right to open guides. 4. Load paper stack in portrait orientation WITH PRINT SIDE FACING DOWN, and place it in center of cassette. Important • Always load paper in portrait orientation (D). Loading paper in landscape orientation (E) can cause paper jams.
Page 79 5. Slide front paper guide (B) to align it with paper stack. Align paper guide with where it clicks into place. 6. Slide right paper guide (C) to align it with paper stack. Do not slide the paper guide too hard against the paper. The paper may not be fed properly. Note •...
Page 80 7. Insert cassette into printer. Push the cassette into the printer until it stops. After inserting the cassette into the printer, the paper information registration screen for the cassette appears on the LCD. 8. Press the OK button. 9. Use the button to select the size of the loaded paper in the cassette, then press the OK button.
Page 81 Note • The (asterisk) on the LCD indicates the current setting. 10. Check media type and press OK button. Follow the instructions of any messages displayed to register the paper information. 11. Open operation panel (I), pull out paper output tray (J), and then open output tray extension (K).
Page 82: Loading Envelopes In Rear Tray
Loading Envelopes in Rear Tray You can load Envelope DL and Envelope Com 10 on the rear tray. The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly. Important • Printing of envelopes from the operation panel or from a PictBridge (Wi-Fi) compliant device is not supported.
Page 83 3. Open the feed slot cover (C). 4. Slide right paper guide (D) to open both paper guides. 5. Load envelopes in portrait orientation WITH PRINT SIDE FACING UP. Up to 10 envelopes can be loaded at once. Fold flap of the envelope and load the envelope in portrait orientation with the address side facing up.
Page 84 6. Slide right paper guide (D) to align with both sides of envelopes. Do not slide the paper guides too hard against the envelopes. The envelopes may not be fed properly. Note • Do not load envelopes higher than the load limit mark (E). 7.
Page 85 After closing the feed slot cover, the paper information registration screen for the rear tray appears on the LCD. 8. Press the OK button. 9. Use button to select size of loaded envelopes on rear tray and press OK button. Note •...
Page 86 Note • To prevent incorrect printing, this printer has a function that detects whether the settings for the paper loaded on the rear tray matches the paper settings. Before printing, make print settings in accordance with the paper settings. When this function is enabled, an error message is displayed if these settings do not match to prevent incorrect printing.
Page 87: Loading Originals
Loading Originals Where to Load Originals Loading Originals on Platen Loading Documents in the ADF (Auto Document Feeder) Loading Based on Use Supported Originals...
Page 88: Where To Load Originals
Where to Load Originals The printer has two positions to load originals: platen and ADF (Auto Document Feeder). Select the position to load the original according to the size, type, or usage. Note • For details on the supported originals, see below. Supported Originals Loading Documents, Photos, or Book on Platen Loading Two or More Sheets of Document of the Same Size and...
Page 89: Loading Originals On Platen
Loading Originals on Platen 1. Open the document cover. 2. Load original WITH SIDE TO SCAN FACING DOWN on platen. Loading Based on Use Supported Originals Important • Be sure to observe the following when loading the original on the platen. Failure to observe the following may cause the scanner to malfunction or the platen glass to break.
Page 90 Important • After loading the original on the platen, be sure to close the document cover before starting to copy, fax, or scan.
Page 91: Loading Documents In The Adf (Auto Document Feeder)
Loading Documents in the ADF (Auto Document Feeder) Load A4, B5, A5, letter-size originals in the ADF (Auto Document Feeder). Important • Be careful not to let anything get inside the document output slot. It may cause damage. Note • To scan a document at optimum quality, load it on the platen. 1.
Page 93: Loading Based On Use
Loading Based on Use Load the original in the correct position according to the function to use. If you do not load the original correctly, it may not be scanned properly. Originals Function How to Load Magazines, Newspapers, and Copying or Faxing Loading the Original to Be Documents Aligned with the alignment mark...
Page 94 Loading the Original to Be Aligned with the alignment mark Place the original WITH THE SIDE TO SCAN FACING DOWN on the platen and align it with the alignment mark . Portions placed on the diagonally striped area cannot be scanned. Important •...
Page 95 Loading Two or More Originals on Platen Place the originals WITH THE SIDE TO SCAN FACING DOWN. Allow 0.40 in. (1 cm) or more space between the edges (diagonally striped area) of the platen and the originals, and between the originals. Portions placed on the diagonally striped area cannot be scanned.
Page 96: Supported Originals
Supported Originals Platen Item Details Types of originals • Text document, magazine, or newspaper • Printed photo, postcard, business card, or disc (BD/DVD/CD, etc.) • Documents that are not suitable for the ADF Size (width x height) Max. 8.5 x 11.7 in. (216 x 297 mm) Quantity One or more sheets* Thickness...
Page 97 Glued documents Documents with sticky notes Documents on carbon paper Documents on coated paper Documents on onion skin or other thin paper Photos or excessively thick documents...
Page 98: Refilling Ink Tanks
Refilling Ink Tanks Refilling Ink Tanks Checking Ink Level Ink Tips...
Page 99: Refilling Ink Tanks
Refilling Ink Tanks When remaining ink cautions or errors occur, the message will appear on the LCD to inform you of the error. In this state, the printer cannot print. Check the remaining ink level with the ink tank indicator on the front of the printer.
Page 100 3. Open the ink tank cover. To refill the black ink tank, open the left ink tank cover (C). To refill color ink tanks, open the right ink tank cover (D). 4. Open the tank cap (E) of the ink tank to be refilled. Important •...
Page 101 6. Hold the ink bottle upright and gently twist the bottle cap (F) to remove. Important • Do not shake the ink bottle. Ink may spatter when opening the cap. 7. Refill the ink tank. Aligning the ink bottle's tip with the printer's inlet (G), slowly stand the bottle upside down, and push the bottle into the inlet.
Page 102 Important • Make sure that each color of ink tanks is filled with corresponding color of ink bottles. • If ink is not injected into the ink tank, slowly remove and insert the ink bottle. • Make sure to refill the ink tank with ink up to the upper limit line (H) on the ink tank. 8.
Page 103 • Ink may stain clothes or other belongings permanently. Washing may not remove ink stains. • Do not use ink bottles and ink contained therein except to refill tanks of printers specified by Canon. • Do not leave ink bottles in areas exposed to high temperature, such as near fire or a heater or in a car.
Page 104 Note • Color ink may be consumed even when printing a black-and-white document or when black-and- white printing is specified. Every ink is also consumed in the standard cleaning and deep cleaning of the print head, which may be necessary to maintain the performance of the printer. When ink runs low, promptly refill it.
Page 105: Checking Ink Level
Checking Ink Level Check ink level with the ink tank indicator on the front of the printer. When ink reaches the upper limit line (A), ink is full. When ink is near the lower limit line (B), ink is running low. Refill the ink tank. Note •...
Page 106: Ink Tips
Therefore, the page yield of the initial bundled set of ink bottles is lower than that of the subsequent sets of bottles. To keep printer's performance, Canon printer performs cleaning automatically according to its condition. When the printer performs cleaning, a small amount of ink is consumed. In this case, all colors of ink may be consumed.
Page 107: If Printing Is Faint Or Uneven
If Printing Is Faint or Uneven Maintenance Procedure Printing the Nozzle Check Pattern Examining the Nozzle Check Pattern Cleaning the Print Head Deep Print Head Cleaning Aligning the Print Head...
Page 108: Maintenance Procedure
Maintenance Procedure If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned printed ruled lines), perform the maintenance procedure below. Important • Do not rinse or wipe the print head. This can cause trouble with the print head. Note •...
Page 109 After cleaning the print head, print and examine the nozzle check pattern: Step1 If the problem is not resolved after performing from step 1 to step 3 twice: Clean the print head deeply. Step4 From the printer Deep Print Head Cleaning From the computer •...
Page 110 Adjusting Print Head Position Automatically • For macOS: Adjusting Print Head Position...
Page 111: Printing The Nozzle Check Pattern
Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle. Note • If the remaining ink level is low, the nozzle check pattern will not be printed correctly. If the remaining ink level is low, refill ink tanks.
Page 112: Examining The Nozzle Check Pattern
Examining the Nozzle Check Pattern Examine the nozzle check pattern, and clean the print head if necessary. 1. Check if there are missing lines in the pattern A or horizontal white streaks in the pattern B. If there are missing lines in the pattern A: C: Good D: Bad (lines are missing) If there are horizontal white streaks in the pattern B:...
Page 113: Cleaning The Print Head
Cleaning the Print Head Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary. Check that printer is turned on.
Page 114: Deep Print Head Cleaning
Deep Print Head Cleaning If print quality does not improve by the standard cleaning of the print head, clean the print head deeply. Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean the print head deeply only when necessary.
Page 115: Aligning The Print Head
Aligning the Print Head If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Note • If the remaining ink level is low, the print head alignment sheet will not be printed correctly. If the remaining ink level is low, refill ink tanks.
Page 116: Performing Maintenance Functions From Your Computer (Macos)
Performing Maintenance Functions from Your Computer (macOS) Opening Remote UI for Maintenance Cleaning the Print Heads Adjusting Print Head Position...
Page 117: Opening Remote Ui For Maintenance
Opening Remote UI for Maintenance You can perform maintenance of printer and change the settings from a Remote UI. The following is the procedure to open a Remote UI. 1. Open System Preferences, and select Printers & Scanners 2. Select your model from the printer list, and click Options & Supplies... 3.
Page 118: Cleaning The Print Heads
Cleaning the Print Heads The print head Cleaning and Deep Cleaning functions allow you to clear up clogged print head nozzles. Perform print head Cleaning if printing results are not satisfactory or if a specific color fails to print, even though there is enough ink.
Page 119 • Is there ink remaining? 3. Perform Deep Cleaning Click Yes. Print head Deep Cleaning starts. 4. Complete Deep Cleaning Next, the message for Nozzle Check pattern printing is displayed. 5. Check the results To check whether the print quality has improved, click Yes. To cancel the check process, click No. Important •...
Page 120: Adjusting Print Head Position
Adjusting Print Head Position Any error in the print head installation position can cause color and line shifts. Adjusting the print head position improves print results. Print Head Alignment - Auto 1. Select Utilities from Remote UI 2. Click Print Head Alignment - Auto A message appears.
Page 121: Cleaning
Cleaning Cleaning Exterior Surfaces Cleaning Platen and Document Cover Cleaning the ADF (Auto Document Feeder) Cleaning Paper Feed Rollers Cleaning Inside the Printer (Bottom Plate Cleaning) Cleaning Cassette Pads...
Page 122: Cleaning Paper Feed Rollers
Cleaning Paper Feed Rollers If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only when necessary.
Page 123 Do not touch the paper feed rollers with your fingers. Paper feeding performance may be degraded. 3. Turn on the power, then clean the paper feed rollers again. If the problem is not resolved after cleaning the paper feed roller, contact your nearest Canon service center to request a repair.
Page 124: Cleaning Inside The Printer (Bottom Plate Cleaning)
Cleaning Inside the Printer (Bottom Plate Cleaning) Remove stains from the inside of the printer. If the inside of the printer becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly. You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper.
Page 125 After inserting the cassette into the printer, the paper information registration screen is displayed on the LCD. Select A4 or Letter for Size:. 5. Open operation panel (A), pull out paper output tray (B), and then open output tray extension (C).
Page 126 Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning again. Note • When performing Bottom Plate Cleaning again, be sure to use a new piece of paper. If the problem is not resolved after performing cleaning again, the protrusions inside the printer may be stained.
Page 127: Overview
Overview Safety Safety Precautions Regulatory Information WEEE (EU & EEA) Handling Precautions Canceling Print Jobs Legal Restrictions on Scanning/Copying Printer Handling Precautions Transporting Your Printer When Repairing, Lending, or Disposing of the Printer Keeping Print Quality High Main Components and Their Use Main Components Power Supply LCD and Operation Panel...
Page 128: Safety
Safety Safety Precautions Regulatory Information WEEE (EU&EEA)
Page 129: Safety Precautions
Safety Precautions Safety Precautions • This manual contains important notices and safety precautions about your printer. Do not use the printer in ways other than described in the accompanying manuals, as this may result in fire, electric shock or other unexpected accidents. •...
Page 130 water and obtain medical advice immediately. If ink gets into your eyes, flush them with water right away, and obtain medical advice immediately. If ink gets on your skin, wash the area with soap and water immediately. If irritation to your skin persists, obtain medical advice immediately.
Page 131 General Notices Choosing a Location Refer to "Specifications" in the Online manual for details on operating environment. • Do not install the printer in a location that is unstable or subject to excessive vibration. • Do not install the printer in locations that get very hot (direct sunlight, or close to a heating source), very humid or dusty locations, or outdoors.
Page 132: Regulatory Information
Regulatory Information IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
Page 133 20cm between the radiator and persons body (excluding extremities: hands, wrists, feet and ankles) and must not be colocated or operated with any other antenna or transmitter. Canon U.S.A., Inc. One Canon Park Melville, New York 11747...
Page 134 Manual, disconnect the equipment from the telephone line cable, turn off the power and disconnect the power cord. The telephone line cable should not be reconnected or the main power switch turned ON until the problem is completely resolved. Users should contact their local authorized Canon Facsimile Service Dealer for the servicing of equipment.
Page 135: Weee (Eu&Eea)
For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service. For more information regarding return and recycling of WEEE products, please visit www.canon- europe.com/weee.
Page 136 U kunt ook het schema voor de afvoer van afgedankte elektrische en elektronische apparatuur (AEEA) raadplegen. Ga voor meer informatie over het inzamelen en recyclen van afgedankte elektrische en elektronische apparatuur naar www.canon- europe.com/weee.
Page 137 RAEE autorizado o con el servicio de recogida de basuras doméstico. Si desea más información acerca de la devolución y reciclado de RAEE, visite la web www.canon-europe.com/weee. Només per a la Unió Europea i a l’Espai Econòmic Europeu (Noruega, Islàndia i Liechtenstein)
Page 138 Yderligere oplysninger om, hvor du kan bortskaffe dit elektronikaffald med henblik på genanvendelse, får du hos de kommunale renovationsmyndigheder. Yderligere oplysninger om returnering og genanvendelse af affald af elektrisk og elektronisk udstyr får du ved at besøge www.canon- europe.com/weee.
Page 139 Du kan få mer informasjon om hvor du kan avhende utrangert utstyr til resirkulering ved å kontakte lokale myndigheter, et godkjent WEEE-program eller husholdningens renovasjonsselskap. Du finner mer informasjon om retur og resirkulering av WEEE-produkter på www.canon-europe.com/weee. Vain Euroopan unionin sekä ETA:n (Norja, Islanti ja Liechtenstein) alueelle.
Page 140 Lisätietoja sähkö- ja elektroniikkalaiteromun keräyksestä ja kierrätyksestä on osoitteessa www.canon-europe.com/weee. Endast för Europeiska unionen och EES (Norge, Island och Liechtenstein) Den här symbolen visar att produkten enligt WEEE-direktivet (2012/19/EU) och nationell lagstiftning inte får sorteras och slängas som hushållsavfall. Den här produkten ska lämnas in på en därför avsedd insamlingsplats, t.ex.
Page 141 WEEE lub skontaktować się z przedsiębiorstwem zajmującym się wywozem odpadów domowych. Więcej informacji o zwracaniu i recyklingu zużytego sprzętu elektrycznego i elektronicznego znajduje się w witrynie www.canon-europe.com/weee. Platí len pre štáty Európskej únie a EHP (Nórsko, Island a Lichtenštajnsko)
Page 142 EEIA struktūru vai sadzīves atkritumu apsaimniekošanas iestādi. Lai saņemtu plašāku informāciju par elektrisko un elektronisko iekārtu nodošanu pārstrādei, apmeklējiet tīmekļa vietni www.canon-europe.com/weee. Tik Europos Sąjungai ir EEE (Norvegijai, Islandijai ir Lichtenšteinui) Šis ženklas reiškia, kad gaminio negalima išmesti su buitinėmis atliekomis, kaip yra nustatyta Direktyvoje...
Page 143 į savo miesto valdžios institucijas, atliekų tvarkymo organizacijas, patvirtintų EEĮ atliekų sistemų arba jūsų buitinių atliekų tvarkymo įstaigų atstovus. Išsamesnės informacijos apie EEĮ atliekų grąžinimo ir perdirbimo tvarką galite rasti apsilankę tinklalapyje www.canon- europe.com/weee. Samo za Evropsko unijo in EGP (Norveška, Islandija in Lihtenštajn) Ta simbol pomeni, da tega izdelka v skladu z direktivo OEEO (2012/19/EU) in državno zakonodajo ne...
Page 144 DEEE aprobată sau serviciul de colectare a deşeurilor menajere. Pentru mai multe informaţii privind returnarea şi reciclarea produselor DEEE, vizitaţi www.canon-europe.com/ weee. Samo za Europsku uniju i EEZ (Norveška, Island i Lihtenštajn) Ovaj simbol pokazuje da se ovaj proizvod ne smije odlagati s kućnim otpadom sukladno WEEE Direktivi...
Page 145 će doprineti efikasnom korišćenju prirodnih resursa. Za više informacija o tome gde možete da predate vašu staru opremu radi recikliranje, vas molimo, da kontaktirate lokalne gradske vlasti, komunalne službe, odobreni plan reciklaže ili Gradsku čistoću. Za više informacija o vraćanju i recikliranju WEEE proizvoda, posetite stranicu www.canon-europe.com/weee.
Page 146: Handling Precautions
Handling Precautions Canceling Print Jobs Legal Restrictions on Scanning/Copying Printer Handling Precautions Transporting Your Printer When Repairing, Lending, or Disposing of the Printer Keeping Print Quality High...
Page 147: Legal Restrictions On Scanning/Copying
Legal Restrictions on Scanning/Copying Scanning, printing, copying, or modifying copies of the following may be punishable under law. This list is non-exhaustive. When in doubt, check with a local legal representative. • Paper money • Money orders • Certificates of deposit •...
Page 148: Printer Handling Precautions
Printer Handling Precautions Be careful not to let anything get inside the document output slot. It may cause damage.
Page 149: Transporting Your Printer
Transporting Your Printer When relocating the printer for changing your living place or repairing it, make sure of the following. Important • You cannot take ink out of ink tanks. • Check if the tank cap is completely inserted. If the ink tank cover is not completely closed, insert the tank cap properly.
Page 150 Note • When entering the transporting mode and proceeding with the procedure, the power is turned off automatically. 4. Open the scanning unit / cover. Important • Do not touch tubes or other parts inside the printer. This can cause trouble with the printer. 5.
Page 151 Important • Do not unplug the printer while the ON lamp is lit or flashing, as it may cause malfunction or damage to the printer, making the printer unable to print. 8. Open the scanning unit / cover again. 9. Remove the carriage stopper (A) and insert it all the way into the hole in the printer side. Pull the carriage stopper forward while pulling it up and insert it in the same orientation.
Page 152 16. Attach the protective material to the printer when packing the printer in the box. Important • We recommend to hold and carry out this printer as shown in the figure below. If you hold the cassette, it may fall out of the printer. Important •...
Page 153: When Repairing, Lending, Or Disposing Of The Printer
For printers with fax capabilities, user information and speed dial numbers can be backed up to a computer by utilizing the Speed Dial Utility2 software before resetting the printer or deleting data. Backed up data can be restored to the repaired printer or another Canon printer. Registering Recipients Using Speed Dial Utility2 (Windows)
Page 154: Keeping Print Quality High
Keeping Print Quality High The key to printing with the optimal printing quality is to prevent the print head from drying or clogging. Always observe the following rules for optimal printing quality. Note • Depending on the type of paper, ink may blur if you trace the printed area with a highlight pen or paint- stick, or bleed if water or sweat comes in contact with the printed area.
Page 155: Main Components And Their Use
Main Components and Their Use Main Components Power Supply LCD and Operation Panel Entering Numbers, Letters, and Symbols...
Page 156: Main Components
Main Components Front View Rear View Inside View Operation Panel...
Page 157: Front View
Front View A: Paper Support Extend to load paper in the rear tray. B: Rear Tray Cover Open to load paper in the rear tray. C: Paper Guides Align with both sides of the paper stack. D: Feed Slot Cover Prevents anything from falling into the feed slot.
Page 158 J: Operation Panel Use to change the settings of the printer or to operate it. Operation Panel K: ADF (Auto Document Feeder) Load a document here. The documents loaded in the document tray are scanned automatically one sheet at a time. Loading Documents in the ADF (Auto Document Feeder) L: Document Feeder Cover Open when clearing jammed documents.
Page 159 P: Document Cover Open to load an original on the platen. Q: Platen Load an original here.
Page 160: Rear View
Rear View A: USB Port Plug in the USB cable to connect the printer with a computer. B: Wired LAN Connector Plug in the LAN cable to connect the printer to a LAN. C: External Device Jack Connect an external device such as telephone or answering device. D: Telephone Line Jack Connect the telephone line.
Page 161: Inside View
Inside View A: Scanning Unit / Cover Scans originals. Open to refill ink tanks and to remove jammed paper. B: Ink Tank Covers Open to refill ink tanks. C: Ink Tanks The black ink tank is on the left, and the color ink tanks (cyan, magenta, and yellow) are on the right. If any ink levels are low, refill the low tanks.
Page 162: Operation Panel
Operation Panel A: ON button Turns the power on or off. Before turning on the power, make sure that the document cover is closed. Turning the Printer On and Off B: ON lamp Lights after flashing when the power is turned on. C: MENU button Displays the Copy menu, Scan menu, or Fax menu screen.
Page 163 M: OK button Finalizes the selection of a menu or setting item. This button is also used to resolve an error or ejects documents in the ADF (Auto Document Feeder). buttons Used to select a setting item. These buttons are also used for entering characters. Selecting a Menu or Setting Item O: Back button Returns the LCD to the previous screen.
Page 164: Power Supply
Power Supply Checking that Power Is On Turning the Printer On and Off Checking the Power Plug/Power Cord Unplugging the Printer...
Page 165: Checking That Power Is On
Checking that Power Is On The ON lamp is lit when the printer is turned on. Even if the LCD is off, if the ON lamp is lit, the printer is on. Note • It may take a while for the printer to start printing immediately after you turn on the printer. •...
Page 166: Turning The Printer On And Off
Turning the Printer On and Off Turning on the printer 1. Press the ON button to turn on the printer. The ON lamp flashes and then remains lit. Checking that Power Is On Note • It may take a while for the printer to start printing immediately after you turn on the printer. •...
Page 167 Important • When you unplug the power cord after turning off the printer, be sure to confirm that the ON lamp is off. Note • You can set the printer to automatically turn off when no operations are performed or no print jobs are sent to the printer for a certain interval.
Page 168: Checking The Power Plug/Power Cord
Checking the Power Plug/Power Cord Unplug the power cord once a month to confirm that the power plug/power cord does not have anything unusual described below. • The power plug/power cord is hot. • The power plug/power cord is rusty. •...
Page 169: Unplugging The Printer
Unplugging the Printer To unplug the power cord, follow the procedure below. Important • When you unplug the power cord, press the ON button, then confirm that the ON lamp is off. Unplugging the power cord while the ON lamp is lit or flashing may cause drying or clogging of the print head and print quality may be reduced.
Page 170: Lcd And Operation Panel
LCD and Operation Panel The mode button (A) on the operation panel allows you to switch between the copy mode, scan mode, fax mode, and setup menu screen. Pressing the MENU button (B) in the respective modes shows the menu screen to select various functions or settings.
Page 171 If the icon appears on the LCD when the mode button (A) is pressed, it indicates that Wi-Fi is enabled and the printer is connected to the wireless router. Depending on the signal state, the icon will change. Signal strength: 81 % or more You can use the printer over Wi-Fi without any problems.
Page 172: Entering Numbers, Letters, And Symbols
Entering Numbers, Letters, and Symbols Use the Numeric buttons to enter or edit such information as unit name, a recipient's name for the directory, etc. Switching the Input Mode Each time the Tone button is pressed, the input mode is switched. The current input mode appears at the upper right corner of the LCD.
Page 173 List of Characters Assigned to Each Numeric Button For Fax/Telephone Number, Name, Number of Copies Lowercase mode Uppercase mode Numeric mode Fax/Tele- Button (:a) (:A) (:1) phone no. abcåäáàãâæç ABCÅÄÁÀÃÂÆÇ defëéèê DEFËÉÈÊ gh i ï í ì î GH I Ï Í Ì Î mnoñøöóòõô...
Page 174 pqrs PQRS wxyz WXYZ . @ - _ SP*2 # ! " , ; : ^ ` = / | ' ? $ % & + ( ) [ ] { } < > \ Switch the input mode. *2 "SP" indicates a space.
Page 175: Changing Settings
Changing Settings Changing Printer Settings from Your Computer (Windows) Changing Printer Settings from Your Computer (macOS) Changing Settings from Operation Panel...
Page 176: Changing Printer Settings From Your Computer (Macos)
Changing Printer Settings from Your Computer (macOS) Managing the Printer Power Changing the Printer Operation Mode...
Page 177: Managing The Printer Power
Managing the Printer Power Printer power supply is operated from Remote UI. Energy saving settings Energy saving settings allow you to set Auto power off and Auto power on. Auto power off is the function wherein the printer automatically turns itself off, when data is not sent or the printer remains inactive for a certain period.
Page 178: Changing The Printer Operation Mode
Changing the Printer Operation Mode If necessary, switch between various modes of printer operation. 1. Check whether the printer is on and select Device settings from Remote UI 2. If necessary, complete the following settings: Print settings - Prevent paper abrasion The printer can increase the gap between the print head and the paper during high-density printing to prevent paper abrasion.
Page 179: Changing Settings From Operation Panel
Changing Settings from Operation Panel Changing Settings from Operation Panel Setting Items on Operation Panel FAX settings Print settings LAN settings PictBridge settings Other dev. settings Language selection Firmware update Reset setting Feed settings Web service setup ECO settings Quiet setting System information...
Page 180: Changing Settings From Operation Panel
Changing Settings from Operation Panel This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Prevent abrasion as an example. Note • The (asterisk) on the LCD indicates the current setting. Check that printer is turned on.
Page 181: Setting Items On Operation Panel
Setting Items on Operation Panel Items for Printer FAX settings Other device settings Language selection Web service setup ECO settings Quiet setting Items for Paper/Printing Print settings PictBridge settings Feed settings Items for Maintenance/Management LAN settings Firmware update Reset setting System information...
Page 182: Fax Settings
FAX settings Select this menu from Setup menu. Easy setup Add tel. number Fax user settings Adv. fax settings Auto print settings Security control Note • Before changing the settings, you can confirm the current settings by printing USER'S DATA LIST. Summary of Reports and Lists Easy setup The printer must be set up depending on your telephone line and use of the faxing function.
Page 183 Note • This setting may not be available depending on the country or region of purchase. • Tel. line auto select (China only) If you select ON, the telephone line type is selected automatically. If you select OFF, you can select the telephone line type manually. Setting Telephone Line Type Adv.
Page 184 • Color transmission When faxing color documents using the ADF (Auto Document Feeder), selects whether to convert them into black & white data if the recipient's fax device does not support color faxing. If you select If incompatible, end, the printer does not send color documents when the recipient's fax device does not support color faxing.
Page 185 33600 bps/14400 bps/9600 bps/4800 bps The fax reception start speed will be faster as the value is bigger. Note • The (asterisk) on the LCD indicates the current setting. • Some of settings are not available depending on the country or region of purchase. •...
Page 186 • Check RX fax info If you select ON, the printer checks whether the recipient's fax device information matches the dialed number. If it matches the number, the printer starts to send faxes. Preventing Mistransmission of Faxes • Hook setting If you select Enable, you can use the on hook dial function.
Page 187: Print Settings
Print settings Select this menu from Device settings in Setup menu. • Prevent abrasion Use this setting only if the print surface becomes smudged. Important • Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality.
Page 188: Lan Settings
LAN settings Select this menu from Device settings in Setup menu. Wi-Fi Wireless Direct Wired LAN Print LAN details Wi-Fi • Wi-Fi enab./disable Enables or disables Wi-Fi. • Wi-Fi setup Selects the setup method for Wi-Fi connection. Note • You can also enter this setting menu by selecting Wi-Fi setup from the Setup menu screen and pressing the OK button.
Page 189 Wireless Direct • Switch WL Direct Enables/disables Wireless Direct. • Change name (SSID) Changes the identifier (SSID/the printer's name displayed on a Wi-Fi Direct compatible device) for Wireless Direct. • Change password Changes the password for Wireless Direct. • Confirm request Set whether the printer displays the confirmation screen when a Wi-Fi Direct compatible device is connecting the printer.
Page 190 Note • You cannot use the same printer name as that already used for other LAN connected devices. • You cannot use a hyphen for the initial or last character of the printer name. • TCP/IP settings Performs IPv4 or IPv6 setting. •...
Page 191 Selecting Enable allows you to print via the network with the IPP protocol. • PictBridge commun. Setting items for printing from a PictBridge (Wi-Fi) compliant device. ◦ Enable/disable Selecting Enable allows you to print from a PictBridge (Wi-Fi) compliant device. ◦...
Page 192: Other Dev. Settings
Other dev. settings Select this menu from Device settings in Setup menu. • Date/time setting Sets the current date and time. Setting Sender Information Important • If a power failure occurs or you unplug the power cord, the date/time settings will be reset. •...
Page 193 • Key repeat Enables/Disables continuous input by pressing and holding down the button when setting the number of copies, the zoom ratio, etc. • Orig. remov. remind. Selects whether the printer will display the reminder screen in case you forget to remove the original from the platen after scanning.
Page 194: Language Selection
Language selection Changes the language for LCD messages and menus. Japanese / English / German / French / Italian / Spanish / Portuguese / Dutch / Danish / Norwegian / Swedish / Finnish / Russian / Ukrainian / Polish / Czech / Slovene / Hungarian / Slovak / Croatian / Romanian / Bulgarian / Turkish / Greek / Estonian / Latvian / Lithuanian / Simplified Chinese / Korean / Traditional Chinese / Indonesian / Vietnamese...
Page 195: Firmware Update
Firmware update Select this menu from Device settings in Setup menu. You can update the firmware of the printer, check the firmware version, or perform settings of a notification screen. Important • When you use this function, make sure the printer is connected to the internet. Note •...
Page 196: Reset Setting
Reset setting Select this menu from Device settings in Setup menu. Returns all settings you made to the printer back to the default. However, some data may not be changed, depending on the current usage state of your printer. Important •...
Page 197 3. Press the OK button after deleting all the numbers and the letters.
Page 198: Feed Settings
Feed settings Select this menu from Setup menu. By registering the paper size and the media type loaded on the rear tray or in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings.
Page 199: Web Service Setup
Web service setup Select this menu from Setup menu. • Connection setup The following setting items are available. ◦ GoogleCloudPrint Registers/Deletes the printer to/from Google Cloud Print. • DNS server setup Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup, follow the display on the LCD to perform settings.
Page 200: Eco Settings
ECO settings This setting allows you to turn on/off the printer automatically to save electricity. Turning off Printer Automatically Turning on Printer Automatically Using Two-sided Printing Turning off Printer Automatically You can enable the printer to turn off automatically when no operation is made or no printing data is sent to the printer for a specified period of time.
Page 201 Using Two-sided Printing Follow the procedure below to use duplex printing. Check that printer is turned on. 2. Press the Setup button. The Setup menu screen is displayed. 3. Select ECO settings and then press the OK button. 4. Select 2-sidedPrintSetting and then press the OK button. 5.
Page 202: Quiet Setting
Quiet setting Enables this function on the printer if you want to reduce the operating noise, such as when printing at night. In addition, you can specify the time range to reduce the operating noise. Important • Set the current date and time in advance. Setting Sender Information Follow the procedure below to perform setting.
Page 203: System Information
System information Select this menu from Setup menu. • Current version Displays the current firmware version. • Printer name Displays the printer name currently specified. • Serial number Displays the printer serial number. • Printed sheet count Displays the printed sheet count in increments of 50 sheets. (Ex: In case of 25 sheets, [1-50] is displayed.)
Page 204: Specifications
Specifications General Specifications Interface USB Port: Hi-Speed USB * Network Port: Wired LAN: 100BASE-TX / 10BASE-T Wi-Fi: IEEE802.11n / IEEE802.11g / IEEE802.11b * A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.
Page 205 (Automatic fallback) Transmission speed Black: Approx. 3 seconds/page at 33.6 kbps (Based on ITU-T No.1 chart for US specifications and Canon FAX Standard chart No.1 for others, both in standard mode.) Color: Approx. 1 minute/page at 33.6 kbps (Based on Canon COLOR FAX TEST SHEET.)
Page 206 • Recipient (max. 20 destinations) • Group dial (max. 19 destinations) Regular dialing (with Numeric buttons) Automatic redialing Manual redialing (max. 10 destinations) Others Activity report (after every 20 transactions) Sequential broadcasting (max. 21 destinations) Rejected numbers (max. 10 destinations) Err reduction (VoIP) * * For details, see "Err reduction (VoIP)"...
Page 207 The necessary amount of hard disk space may be changed without notice. Other Supported OS iOS, Android, Windows 10 Mobile Some functions may not be available with the supported OS. Refer to the Canon web site for details. Mobile Printing Capability Apple AirPrint Google Cloud Print...
Page 208: Information About Paper
Information about Paper Supported Media Types Paper Load Limit Unsupported Media Types Handling Paper Print Area...
Page 209: Supported Media Types
Canon website. • Genuine Canon paper is not available in some countries or regions. Note that in the United States, Canon paper is not sold by model number. Instead, purchase paper by name.
Page 210 Paper other than genuine Canon paper • Plain Paper (including recycled paper) • Envelopes*1 • Greeting Card*1 *1 Printing to this paper from the operation panel or from a PictBridge (Wi-Fi) compliant device is not supported. Paper Load Limit Paper Settings on the Printer Driver and the Printer (Media Type) (Windows) Note •...
Page 211 • Envelope DL • Nagagata 3 • Nagagata 4 • Yougata 4 • Yougata 6 • Card 2.17"x3.58" Special sizes Special page sizes must be within the following limits: • rear tray ◦ Minimum size: 2.17 x 3.51 in. (55.0 x 89.0 mm) ◦...
Page 212: Paper Load Limit
Note • Page sizes and media types differ depending on the country or region where the paper is sold. For details on page sizes and media types, access the Canon website. Paper Load Limits of Rear Tray and Cassette Genuine Canon Paper Paper for printing documents: Media Name <Model No.>...
Page 213 Paper other than Genuine Canon Paper Common Name Rear Tray Cassette Plain Paper (including recycled paper)*1 Approx. 100 sheets (Legal: Approx. 250 sheets 10 sheets) Envelopes 10 envelopes Greeting Card Letter, 7"x10"(18x25cm): 1 sheet *1 Normal feeding at maximum capacity may not be possible with some types of paper, or under very high or low temperature or humidity.
Page 214: Unsupported Media Types
Unsupported Media Types Do not use the following types of paper. Using such paper will cause not only unsatisfactory results, but also the printer to jam or malfunction. • Folded, curled, or wrinkled paper • Damp paper • Paper thinner than a postcard, including plain paper or notepad paper cut to a small size (when printing on paper smaller than A5) •...
Page 215: Handling Paper
Handling Paper • Be careful not to rub or scratch the surfaces of any types of paper when handling. • Hold the paper as closely as possible to its edges and try not to touch the printing surface. The print quality may be degraded if the printing surface is smudged with sweat or oil that comes from your hands.
Page 216: Economy Mode
◦ Measurement images: Color printing: A4 color document ISO/IEC24712 Black & white printing: A4 monochrome document ISO/IEC19752 ◦ Measurement method: Canon original ◦ Paper type: Plain paper ◦ Print driver setting: Setting to the default for plain paper, setting Grayscale Printing to ON when measuring in black and white.
Page 217: Printing
Printing Printing from Computer Printing from Smartphone/Tablet Printing Using Operation Panel Printing from Digital Camera Paper Settings...
Page 218: Printing From Computer
Printing from Computer Printing from Application Software (Windows Printer Driver) Printing from Application Software (macOS AirPrint) Printing Using Canon Application Software Printing Using a Web Service...
Page 219: Printing From Application Software (Macos Airprint)
Printing from Application Software (macOS AirPrint) Printing Basic Perform Borderless Printing Printing on Postcards Adding Printer How to Open Printer Settings Screen Displaying the Printing Status Screen Deleting the Undesired Print Job Removing Printer That Is No Longer Required from List of Printers...
Page 220: Printing
Printing This printer is compatible with the macOS standard printing system (AirPrint). You can start printing right away after connecting this printer to your Mac without installing any special software. Checking Your Environment First, check your environment. • AirPrint Operation Environment Mac running the latest version of OS •...
Page 221 Note • Click Show Details to switch the setup window to the detailed display. 6. Check print settings Set items such as Paper Size to the appropriate size, as well as Feed From and Media Type from Media & Quality of the pop-up menu. Select Auto Select for Media Type.
Page 222 position differs depending on Media Type. If Media Type is set to plain paper, it is fed from the cassette (main tray). If set to other types of paper, it is fed from the rear tray. • If printing paper such as photo paper and postcards that cannot be printed on both sides, uncheck the Two-Sided checkbox.
Page 223: Perform Borderless Printing
Perform Borderless Printing The borderless printing function allows you to print data without any margin by enlarging the data so that it extends slightly off the paper. In standard printing, margins are created around the document area. However, in borderless printing function, these margins are not created. When you want to print data such as a photo without providing any margin around it, set borderless printing.
Page 224 Important • Borderless printing only supports specific paper sizes. Make sure to select a paper size with the wording "Borderless" from the Paper Size. • Print quality may deteriorate or the sheet may be stained at the top and bottom depending on the type of paper used.
Page 225: Printing On Postcards
Printing on Postcards This section describes the procedure for printing on postcards. Load postcards in printer 2. Select paper size and paper type from the printer Register Hagaki for paper size from the printer operation panel. Also, register Hagaki, IJ Hagaki, or Hagaki K for paper type, according to your purpose. When you print on the address side, register Hagaki.
Page 226 Important • Two-sided printing is not possible for postcards, so remove the Two-Sided check mark. If you print with the Two-Sided check mark on, the printing result may not be as you intended. • You will get cleaner printing if you print the message side first and then print the address side. 5.
Page 227: Adding Printer
Adding Printer Procedure for adding printer to your Mac is explained. To re-add a printer that was deleted, open System Preferences -> Printers & Scanners, click + next to the printer list, and then perform the procedure described below. If your printer is connected via USB, and you connect the USB cable to a Mac, the printer is automatically added.
Page 228: How To Open Printer Settings Screen
How to Open Printer Settings Screen The settings screen of the printer can be displayed from your application software. Opening the Page Setup Dialog Use this procedure to set the page (paper) settings before printing. 1. Select Page Setup... from the File menu of the application software The Page Setup dialog opens.
Page 229: Displaying The Printing Status Screen
Displaying the Printing Status Screen Check the print progress according to the following procedure: 1. Launch the printing status screen • If the print data has been sent to the printer The printing status screen opens automatically. To display the printing status screen, click the (the printer icon) displayed on the Dock.
Page 230: Deleting The Undesired Print Job
Deleting the Undesired Print Job If the printer does not start printing, canceled or failed print job data may be remaining. Delete unnecessary print jobs from the print status check screen. 1. Open System Preferences, and select Printers & Scanners 2.
Page 231: Removing Printer That Is No Longer Required From List Of Printers
Removing Printer That Is No Longer Required from List of Printers The printer that is no longer in use can be removed from the list of printers. Before removing the printer, remove the cable connecting the printer and PC. You cannot remove the printer if not logged in as the administrator. For information about an administrative user, see Users &...
Page 232: Printing Using Canon Application Software
Printing Using Canon Application Software Easy-PhotoPrint Editor Guide...
Page 233: Printing From Smartphone/Tablet
Printing from Smartphone/Tablet Printing from iPhone/iPad/iPod touch (iOS) Printing from Smartphone/Tablet (Android) Printing from Windows 10 Mobile Device Printing/Scanning with Wireless Direct...
Page 234: Printing/Scanning With Wireless Direct
Printing/Scanning with Wireless Direct You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below. • Wireless connection (connecting devices via a wireless router) • Direct wireless connection (connecting devices using Wireless Direct) This section describes Wireless Direct, which allows you to print or scan by connecting the devices to the printer directly.
Page 235 The Wireless Direct is enabled and a device can be connected to the printer wirelessly. Note • You can check the following on the Wireless router info screen. Use the button to select an item you want to check and then press the OK button. Network name(SSID): Identifier Security protocol: Security setting and password WL Direct dev.
Page 236 • For more on printing or scanning from a device via Wi-Fi, refer to the device's or application's instruction manual. • You can print/scan from your smartphone or tablet by installing Canon PRINT Inkjet/SELPHY. Download it from App Store and Google Play.
Page 237 Change password • Manual setup 1. Select Manual setup and then press the OK button. 2. Enter new password and then press the OK button. • Auto update 1. Select Auto update and then press the OK button. 2. Select Yes and then press the OK button. 3.
Page 238: Paper Settings
Paper Settings By registering the paper size and the media type loaded on the rear tray or in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings.
Page 239 • When you insert the cassette: The screen to register the cassette paper information is displayed. Register the page size according to the paper loaded in the cassette. * You can load only plain paper in the cassette. Important • For more on the proper combination of paper settings you can specify by the printer driver for Windows and on the LCD: Paper Settings on the Printer Driver and the Printer (Media Type) Paper Settings on the Printer Driver and the Printer (Paper Size)
Page 240 When you start printing or copying, a message is displayed. Pressing the OK button displays the paper setting specified for printing or copying under the message. Please choose one of the following. Note • Depending on the setting, the choices below may not be displayed. Print on set paper Select if you want to print/copy on the paper loaded without changing the paper settings.
Page 241 Default Setting for Displaying the Message which Prevents Misprinting • When you print/copy using the operation panel of the printer or when you print from smartphone/tablet: The message which prevents misprinting is enabled by default. To change the setting: Feed settings •...
Page 242: Copying
Copying Reducing/Enlarging Copies Making Copies Basics Two-Sided Copying Collated Copying Special Copy Menu Copying Using Smartphone or Tablet...
Page 243: Making Copies
Making Copies This section describes the basic procedure to perform standard copying. Check that printer is turned on. Load paper. 3. Press the COPY button. The Copy standby screen is displayed. Load original document on platen or in ADF (Auto Document Feeder). 5.
Page 244 Adding the Copying Job (Reserve copy) If you load the original on the platen, you can add the copying job while printing (Reserve copy). The screen like shown below is displayed when you can reserve copy. Load the original on the platen and press the same button (the Color button or the Black button) as the one which you previously pressed.
Page 245: Setting Items For Copying
Setting Items for Copying You can change the copy settings such as the page size, media type, and intensity. In the copy mode, press the MENU button, use the button to select a setting item, then press the OK button. Use the button to adjust each setting item, then press the OK button.
Page 246 Note • Some of setting items are not available depending on the country or region of purchase. • Media type Select the media type of the loaded paper. • Paper Source Select a paper source (Rear tray/Cassette/Auto) where paper is loaded. Note •...
Page 247 • Collate Select whether to obtain sorted printouts when making multiple copies of a multi-paged original. Collated Copying Note • This setting item is displayed when standard copying is selected. • 2-sided Select whether to perform two-sided copying. Note • This setting item is displayed only when 2-sided copy is selected for Special copy. Two-Sided Copying •...
Page 248: Scanning
Scanning Scanning from Computer (Windows) Scanning from Computer (macOS) Scanning from Operation Panel Scanning Using Smartphone/Tablet...
Page 249: Scanning From Computer (Macos)
Scanning from Computer (macOS) Scanning According to Item Type or Purpose (IJ Scan Utility Lite) IJ Scan Utility Lite Features Scanning Easily (Auto Scan) Basics Scanning Documents and Photos Scanning Tips Positioning Originals (Scanning from Computer)
Page 250: Scanning According To Item Type Or Purpose (Ij Scan Utility Lite)
Scanning According to Item Type or Purpose (IJ Scan Utility Lite) IJ Scan Utility Lite Features Scanning Easily (Auto Scan) Basics Scanning Documents and Photos Important • Available functions and settings vary depending on your scanner or printer.
Page 251: Ij Scan Utility Lite Features
IJ Scan Utility Lite Features Use IJ Scan Utility Lite to scan and save documents, photos, or other items at one time by simply clicking the corresponding icon. Important • The displayed items and available functions vary depending on your scanner or printer. Multiple Scanning Modes Auto allows for one click scanning with default settings for various items.
Page 252 Note • To set the applications to integrate with, see Settings Dialog.
Page 253: Scanning Easily (Auto Scan)
Scanning Easily (Auto Scan) Auto Scan allows for automatic detection of the type of the item placed on the platen or ADF (Auto Document Feeder). Important • This function is not supported depending on your model. • The following types of items may not be scanned correctly. In that case, adjust the cropping frames (selection boxes;...
Page 254 Scanning Multiple Documents at One Time from the ADF (Auto Document Feeder)
Page 255: Scanning Documents And Photos
Scanning Documents and Photos Scan items placed on the platen with settings suitable for documents or photos. Save documents in formats such as PDF and JPEG, and photos in formats such as JPEG and TIFF. 1. Place the item on the platen. Positioning Originals (Scanning from Computer) 2.
Page 256: Scanning Tips
Scanning Tips Positioning Originals (Scanning from Computer)
Page 257: Positioning Originals (Scanning From Computer)
Positioning Originals (Scanning from Computer) This section describes how to load originals on the platen or ADF (Auto Document Feeder) for scanning. If items are not placed correctly they may not be scanned correctly. Important • Be sure to observe the following when loading the original on the platen. Failure to observe the following may cause the scanner to malfunction or the platen glass to break.
Page 258 of the platen and the item. Portions placed on the diagonally striped area cannot be scanned. Important • Inkjet All-In-One printer: Important For the portions in which items cannot be scan- • Large items (such as A4 size photos) that cannot be ned, click Home to return to the top page of the placed away from the edges/arrow (alignment mark) of Online Manual for your model and search for...
Page 259 1. Make sure any original has been removed from platen. 2. Open document tray (A). 3. Slide the paper guides (B) all the way out. 4. Load document with side to scan facing up in document tray. Insert the document until it stops. 5.
Page 260 Placing Items (When Using Stand) 1. Place item on platen. 1. Open the document cover. 2. Place the item with the side to scan facing the platen, and then align it with the alignment mark. Important • If you open the document cover wide, the scanner may fall over. •...
Page 261 Important • Keep these points in mind when using the scanner in the upright position. Do not subject the scanner to vibration during operation. The correct image results may not be obtained (for example, images may blur). The item type may not be detected automatically. In that case, specify the item type in IJ Scan Utility and scan.
Page 262: Faxing
Faxing Preparing for Faxing Registering Recipients Sending Faxes from Computer (Windows) Sending Faxes Using Operation Panel of Printer Sending Faxes from Computer (Mac OS) Receiving Faxes Other Useful Fax Functions...
Page 263: Preparing For Faxing
Preparing for Faxing Connect the printer to the telephone line and set up the printer before using the faxing functions. Then specify the basic setting such as sender information, date/time, and daylight saving time. Important • If the Power Disconnects: If there is a power failure or if you accidentally unplug the power cord, the date/time settings will be reset.
Page 264: Connecting Telephone Line
Connecting Telephone Line The connection method differs depending on your telephone line. • If you connect the printer to wall telephone line directly/If you connect the printer with the xDSL splitter: Basic Connection (Connecting with General Telephone line) • If you connect the printer to another line such as an xDSL: Connecting Various Lines If the connection is incorrect, the printer cannot send/receive faxes.
Page 265 When you connect the telephone to the printer, make sure that the printer is turned off, connect one end of the modular cable to the external device jack near the "EXT." mark of the printer, then connect the other end to the telephone line jack of the telephone. Important •...
Page 266 Note • xDSL is the generic term for the high speed digital communication technology with telephone line such as ADSL/HDSL/SDSL/VDSL. • Connecting to an Internet Telephone A: Digital Subscriber Line B: xDSL modem (splitter may not be built-in to the modem) C: Broadband router compatible with Internet Telephone D: Computer E: Telephone or answering machine...
Page 267 Note • When connecting to the xDSL line, select the same line type as you are subscribing to in Telephone line type. Setting Telephone Line Type • Connecting to an ISDN Line For details on ISDN (Integrated Service Digital Network) connection and settings, refer to the manuals supplied with your terminal adapter or dial-up router.
Page 268: Setting Telephone Line Type
Setting Telephone Line Type Before using your printer, make sure you set the correct telephone line type for your telephone line. If you are unsure of your telephone line type, contact your telephone company. For xDSL or ISDN connections, contact the telephone company or service provider to confirm your line type. Important •...
Page 269 7. Press the FAX button to return to the Fax standby screen. Setting the Telephone Line Type Manually in China This section describes the procedure to set the telephone line type manually in China. Check that printer is turned on. 2.
Page 270: Setting Receive Mode
Setting Receive Mode Set the receiving operation (receiving mode). For details on how to set the receive mode: Setting Receive Mode You can select the appropriate mode. For details on the selectable receive mode: About Receive Mode For details on the advanced settings of the receive mode: Advanced Settings of Receive Mode Note •...
Page 271 About Receive Mode • DRPD is available only in the US and Canada. • Network switch may not be available depending on the country or region of purchase. • Refer to Receiving Faxes for information on receiving faxes or the procedure for each receive mode.
Page 272 • Fax only mode Select when not receiving voice calls. Receiving operation: 1. When a fax incomes, the printer will receive the fax automatically. Advanced Settings of Receive Mode You can specify the advanced settings of each receive mode. Note •...
Page 273 Use the button or the Numeric buttons to specify the number of times the external device rings when incoming. • Advanced setting in DRPD You can specify the following setting items. ◦ DRPD: Fax ring pat. Sets the distinctive ring pattern of a call that the printer assumes is a fax call. If you subscribe to a DRPD service, set the ring pattern to match the pattern assigned by your telephone company.
Page 274 The confirmation screen asking whether to make advanced settings is displayed. 6. Select Yes, then press the OK button. 7. Select DRPD: Fax ring pat., then press the OK button. The DRPD: Fax ring pat. screen is displayed. 8. Select the ring pattern that your telephone company assigned to your fax number, then press the OK button.
Page 275: Setting Sender Information
Setting Sender Information You can set the sender information such as user information and date/time. About Sender Information Setting Date and Time Setting Daylight Saving Time (Summer Time) Registering User Information About Sender Information If the unit name and unit fax/telephone number are registered, they are printed with date and time as sender information on the recipient's fax.
Page 276 Setting Date and Time This section describes the procedure to set the date and time. Check that printer is turned on. 2. Press the Setup button. The Setup menu screen is displayed. 3. Select Device settings, then press the OK button. 4.
Page 277 2. Press the Setup button. The Setup menu screen is displayed. 3. Select Device settings, then press the OK button. 4. Select Other dev. settings, then press the OK button. 5. Select DST setting, then press the OK button. 6. Select ON, then press the OK button. To disable summer time, select OFF.
Page 278 9. Use the button to move the cursor under the desired position, use the Numeric buttons to enter the time (in 24-hour format) when summer time ends, then press the OK button. Precede single digits with a zero. 9. Press the FAX button to return to the Fax standby screen. Registering User Information This section describes the procedure to register the user information.
Page 279 3. Press the OK button. Note • You can enter the name up to 24 characters, including spaces. • For details on how to enter or delete characters: Entering Numbers, Letters, and Symbols 7. Press the FAX button to return to the Fax standby screen.
Page 280: Registering Recipients
Registering Recipients Registering Recipients Using Operation Panel of Printer Registering Recipients Using Speed Dial Utility2 (Windows) Registering Recipients Using Speed Dial Utility2 (macOS)
Page 281: Registering Recipients Using Operation Panel Of Printer
Registering Recipients Using Operation Panel of Printer Registering recipients in the printer's directory in advance allows you to dial fax/telephone numbers simply. The following methods to register are available: • Recipient registration Registering the recipient's fax/telephone number and name allows you to send a fax by selecting a registered recipient in the printer directory.
Page 282: Registering Fax/Telephone Number Of Recipients
Registering Fax/Telephone Number of Recipients Before you can use the printer's directory, you need to register the recipients' fax/telephone numbers. Follow the procedure below to register the recipients' fax/telephone numbers. Check that printer is turned on. 2. Press the FAX button. The Fax standby screen is displayed.
Page 283 The fax/telephone number selected from the outgoing call logs is displayed. 2. Check the fax/telephone number, then press the OK button. The fax/telephone number is registered to the printer and the screen to enter the recipient's name is displayed. • From incoming log is selected as the registration method: The screen to select the fax/telephone number or the name from the incoming call logs is displayed.
Page 284 If you select a name on From incoming log in step 9, the name may be already entered. If you do not change the name, go to step 11. Note • You can enter the name up to 16 characters, including spaces. Entering Numbers, Letters, and Symbols 11.
Page 285: Registering Recipients In Group Dial
Registering Recipients in Group Dial If you register two or more registered recipients to a group dial, you can send the same document successively to all recipients registered to the group dial. Check that printer is turned on. 2. Press the FAX button. The Fax standby screen is displayed.
Page 286 You can choose a recipient with the two methods. The method can be switched by pressing the button. • When Add to group is displayed on the LCD: Use the button to select a recipient's ID number to register to the group dial. •...
Page 287 11. Press the OK button to finalize registration. Note • To register another group, select an unregistered ID number and operate in the same procedure. • To return to the Fax standby screen, press the FAX button. • You can check the recipients you have registered to the group dial by printing GROUP DIAL TELEPHONE NO.
Page 288: Changing Registered Information
Changing Registered Information To change information registered for recipient and group dial, follow the procedure below. Check that printer is turned on. 2. Press the FAX button. The Fax standby screen is displayed. 3. Press the MENU button. The Fax menu screen is displayed. 4.
Page 289 Note • This registration method may not be available depending on the country or region of purchase. ◦ Enter directly is selected as the registration method: The editing screen is displayed. Change the recipient's fax/telephone number, then press the OK button. Note •...
Page 290: Deleting Registered Information
Deleting Registered Information To delete information registered for recipient and group dial, follow the procedure below. Check that printer is turned on. 2. Press the FAX button. The Fax standby screen is displayed. 3. Press the MENU button. The Fax menu screen is displayed. 4.
Page 291: Printing List Of Registered Destinations
Printing List of Registered Destinations You can print a list of the fax/telephone numbers and can keep it near the printer to refer to when dialing. Check that printer is turned on. Load paper. 3. Press the FAX button. The Fax standby screen is displayed. 4.
Page 292: Registering Recipients Using Speed Dial Utility2 (Macos)
Registering Recipients Using Speed Dial Utility2 (macOS) About Speed Dial Utility2 Speed Dial Utility2 is a utility for forwarding the telephone directory registered on the printer to a computer and registering/changing it on the computer. In addition, you can register the telephone directory edited on the computer to the printer.
Page 293: Starting Up Speed Dial Utility2
Follow the procedure below to start up Speed Dial Utility2. 1. Select Applications on Go menu of Finder. 2. Double-click Canon Utilities folder. 3. Double-click Speed Dial Utility2 folder. 4. Double-click Speed Dial Utility2. Speed Dial Utility2 starts up.
Page 294: Speed Dial Utility2 Dialog
Speed Dial Utility2 Dialog The following items are on the Speed Dial Utility2 dialog. 1. Printer Name: Selects the printer for editing the telephone directory using Speed Dial Utility2. Behind printer name, printer's MAC address is displayed. Note • For checking printer's MAC address, refer to "Checking Network Information" for your model from Home of the Online Manual.
Page 295 Displays the registered information selected for Setting Item List:. Note • By clicking on the item name, you can sort the display order. 5. Edit.../Select All/Delete Edits the item that selected for Setting Item List:, or deletes the item, or selects all the items. When multiple items on the registered information list are selected, you cannot use the Edit...
Page 296: Saving Registered Telephone Directory On Printer To Your Computer
Saving Registered Telephone Directory on Printer to Your Computer Follow the procedure below to save the telephone directory (includes recipients' name, recipients' fax/ telephone number, group dial, user's name, user's fax/telephone number, and rejected numbers) that registered on the printer to the computer. Start up Speed Dial Utility2.
Page 297: Registering A Fax/Telephone Number Using Speed Dial Utility2
Registering a Fax/telephone Number Using Speed Dial Utility2 Follow the procedure below to register fax/telephone numbers. Note Before you register fax/telephone numbers using Speed Dial Utility2, make sure that no fax operations are in progress. Start up Speed Dial Utility2. 2.
Page 298 Note • You can only add the numbers that have already been registered. 6. Click OK. To continue registering fax/telephone numbers or a group dial, repeat steps 4 to 6. • To save the registered information on the computer. 1. Click Save to PC..2.
Page 299: Changing A Fax/Telephone Number Using Speed Dial Utility2
Changing a Fax/telephone Number Using Speed Dial Utility2 Follow the procedure below to change fax/telephone numbers. Note • Before you change fax/telephone numbers using Speed Dial Utility2, make sure that no fax operations are in progress. Start up Speed Dial Utility2. 2.
Page 300 To delete a member: Select a code to delete from group dial, and then click << Delete. 5. Click OK. To continue changing fax/telephone numbers or group dials, repeat steps 4 and 5. • To save the edited information on the computer. 1.
Page 301: Deleting A Fax/Telephone Number Using Speed Dial Utility2
Deleting a Fax/telephone Number Using Speed Dial Utility2 Follow the procedure below to delete fax/telephone numbers. Note • Before you delete fax/telephone numbers using Speed Dial Utility2, make sure that no fax operations are in progress. Start up Speed Dial Utility2. 2.
Page 302: Changing Sender Information Using Speed Dial Utility2
Changing Sender Information Using Speed Dial Utility2 Follow the procedure below to change the user's name or fax/telephone number. Start up Speed Dial Utility2. 2. Select a printer from Printer Name: list box, and then click Display Printer Settings. 3. Click User Information Setting from Setting Item List:. The user's information is displayed.
Page 303: Registering/Changing Rejected Number Using Speed Dial Utility2
Registering/Changing Rejected Number Using Speed Dial Utility2 Follow the procedure below to register, change, or delete rejected numbers. Start up Speed Dial Utility2. 2. Select a printer from Printer Name: list box, and then click Display Printer Settings. 3. Click Rejected Number Setting from Setting Item List:. The list of rejected numbers is displayed.
Page 304: Registering Telephone Directory Has Been Saved On Your Computer To Printer
Registering Telephone Directory Has been Saved on Your Computer to Printer You can load the data of the telephone directory (RSD file, *.rsd) and register it to your printer. The data of the telephone directory (RSD file, *.rsd) that is exported from other printer can be loaded and registered to your printer.
Page 305: Sending Faxes Using Operation Panel Of Printer
Sending Faxes Using Operation Panel of Printer Sending Faxes by Entering Fax/Telephone Number Basic Resending Faxes (Redialing Busy Number) Setting Items for Sending Faxes...
Page 306: Sending Faxes By Entering Fax/Telephone Number
Sending Faxes by Entering Fax/Telephone Number This section describes dialing and sending faxes directly by entering the fax/telephone numbers. Important • It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect registration of fax/telephone numbers. When you send important documents, we recommend that you send them after speaking on the telephone.
Page 307 button: By pressing this button once, "#" is entered. By pressing this button one more time, "P" is entered. 6. Press the Black button or the Color button. The printer starts scanning the document. Important • Color transmission is available only when the recipient's fax device supports color faxing. •...
Page 308 • Do not unplug the power cord until all documents are sent. If you unplug the power cord, all unsent documents stored in the printer's memory are lost.
Page 309: Resending Faxes (Redialing Busy Number)
Resending Faxes (Redialing Busy Number) There are two methods of redialing: Automatic redialing and Manual redialing. • Automatic Redialing If you send a document and the recipient's line is busy, the printer will redial the number after a specified interval. Automatic Redialing •...
Page 310 Manual Redialing Follow the procedure below for manual redialing. Check that printer is turned on. 2. Press the FAX button. The Fax standby screen is displayed. Load documents on platen or in ADF (Auto Document Feeder). 4. Adjust the scan contrast and resolution as necessary. Setting Items for Sending Faxes 5.
Page 311: Setting Items For Sending Faxes
Setting Items for Sending Faxes If you select Fax TX settings after pressing the MENU button on the Fax standby screen, you can specify the settings of the scan contrast and the scan resolution. Adjust the scan contrast and resolution following the procedure below. 1.
Page 312 Note • When sending a color fax, documents are always scanned in the same resolution (200 x 200 dpi). The image quality (compression rate) is determined by which scan resolution is selected, except that Extra fine and Photo provide the same image quality. 7.
Page 313: Sending Faxes From Computer (Mac Os)
Sending Faxes from Computer (Mac OS) Sending Faxes Using AirPrint General Notes (Fax Transmission Using AirPrint)
Page 314: Sending Faxes Using Airprint
Sending Faxes Using AirPrint You can send faxes from a printer using AirPrint. To send faxes, add your printer to your computer. Checking Environment First, check your environment. • AirPrint operation environment A computer running Mac OS. Note • For supported operating system versions, click Home to return to the top page of the Online Manual for your model and search for "Specifications."...
Page 315 To open the Print dialog, you typically select Print... from the File menu of your application software. 4. Select Canon XXX series - Fax (where "XXX" is the model name) from Printer list. 5. Specify fax paper settings as needed.
Page 316 6. Enter fax/telephone numbers in To.
Page 317 If you specify a dialing prefix, enter the code in Dialing Prefix and specify the cover page settings as needed. 7. Click Fax. The number is dialed automatically and the fax is sent. Note • To cancel sending the fax, press the printer's Stop button. Automatic Redialing If the fax could not be sent (for example, when the recipient was busy), the number is redialed automatically according to the automatic redialing setting of the printer.
Page 318: General Notes (Fax Transmission Using Airprint)
General Notes (Fax Transmission Using AirPrint) Sending faxes is subject to the following restrictions. • Enter the characters in To and Dialing Prefix so that the total number of characters is within 40 characters. • You can use the following characters for To: Character Explanation 0 - 9 * #...
Page 319: Receiving Faxes
Receiving Faxes Receiving Faxes Changing Paper Settings Substitute Reception in Printer's Memory...
Page 320: Receiving Faxes
Receiving Faxes This section describes the preparation necessary for receiving a fax and how to receive a fax. Preparing for Receiving a Fax Prepare for receiving a fax according to the following procedure. Check that printer is turned on. 2. Press the FAX button. The Fax standby screen is displayed.
Page 321 Advanced Settings of Receive Mode • If the printer was not able to print a received fax, the printer stores the unprinted fax in its memory (Substitute Reception). Substitute Reception in Printer's Memory When Tel. priority mode is selected: • When the call is a fax: The telephone will ring when a call incomes.
Page 322 If the answering mode is turned off on the answering machine, pick up the handset. If you hear the fax tone, wait for at least 5 seconds after it stops, then hang up the handset. If Manual/auto switch of the advanced setting is set to ON, set RX start time to longer than the time before the answering machine starts playing the answering message.
Page 323 When DRPD or Network switch is selected: • When the call is a fax: The telephone will ring when a call incomes. The printer will receive the fax automatically when the fax ring pattern is detected. Note • You can change the number of times to ring the telephone. Advanced Settings of Receive Mode •...
Page 324: Changing Paper Settings
Changing Paper Settings This printer prints received faxes to paper loaded in the printer beforehand. You can use the operation panel to change the paper settings for printing faxes. Make sure that the settings are appropriate for the loaded paper. Important •...
Page 325 Note • The (asterisk) on the LCD indicates the current setting. Page size Select the page size from A4, Letter, or Legal. Note • Some of page sizes are not available depending on the country or region of purchase. Media type The paper type is set to Plain paper.
Page 326: Substitute Reception In Printer's Memory
Substitute Reception in Printer's Memory The printer prints the received fax automatically by default. And furthermore, the printer stores the received fax in its memory. When the faxes are stored in the printer's memory, the FAX Memory lamp is lit or flashes. In the following conditions, the received fax is not printed automatically, only is stored in the printer's memory.
Page 327 If you use the fax capabilities, make sure sufficient ink remains in the ink tank in advance. In addition, we recommend you refill the ink tank early so that ink does not become insufficient while fax printing is in progress. Visually inspect the remaining ink in the printer's ink tank. Moreover, we recommend you check printed pages immediately after faxes are received.
Page 328: Other Useful Fax Functions
Other Useful Fax Functions Document Stored in Printer's Memory...
Page 329: Document Stored In Printer's Memory
Document Stored in Printer's Memory The faxes will be stored in the printer's memory automatically when they are received. However, printer's memory has an upper limit on the number of faxes or subjects it can contain. When the printer's memory is full, faxes stored latest will overwrite those stored earliest.
Page 330 However, the printer's memory has an upper limit on the number of faxes or subjects it can contain. When the amount of stored fax reaches the upper limit of the printer's memory, faxes stored latest will overwrite those stored earliest. As long as paper is loaded, the printer will perform printing even when the ink remaining is insufficient.
Page 331: Printing Document In Printer's Memory
Printing Document in Printer's Memory You can print a specified document in the printer's memory or print all the received documents in its memory at a time. When printing a specified document, you specify it by its transaction number. If you do not know the transaction number for your target document, print the list of documents (MEMORY LIST) first.
Page 332 : Indicates a color document. : Indicates the document during transmission. : Indicates the document sent with sequential broadcasting. • By pressing the button or the Tone button, the transaction number displayed on the LCD is switched to transaction time or fax/telephone number. Specify the document and print it following the procedure below.
Page 333: Deleting Document In Printer's Memory
Deleting Document in Printer's Memory You can delete a specified document in the printer's memory or delete all the documents in its memory at a time. Note • When deleting a specified document, you specify it by its transaction number (TX/RX no.). If you do not know the transaction number for your target document, print the list of documents (MEMORY LIST) first.
Page 334 • By pressing the button or the Tone button, the transaction number displayed on the LCD is switched to transaction time or fax/telephone number. Specify the document and delete it following the procedure below. 1. Select the transaction number (TX/RX no.) of the document you want to delete, then press the OK button.
Page 335: Frequently Asked Questions
Frequently Asked Questions Cannot Find Printer on Network Cannot Find Printer while Using Wi-Fi Network Key (Password) Unknown Network Cannot Print or Connect For other questions about network, click here. Printer Does Not Print Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/Streaks or Lines Printout Results Are Unsatisfactory Print List of Support Code for Error (Paper Jams)
Page 336 Ink Does Not Come Out List of Support Code for Error (Paper Jams) Printer Does Not Pick up or Feed the Paper/"No Paper" Error Automatic Duplex Printing Problems Paper Does Not Feed from Paper Source Specified in Printer Driver (Windows) Printout Results Are Unsatisfactory Scanning Problems (Windows) Scanning Problems (macOS)
Page 337 Scanning Problems (Windows) Scanning Problems (macOS) Faxing Problems Mechanical Problems Installation and Download Problems Errors and Messages If You Cannot Solve a Problem Repairing Your Printer Check the State of the Print Head...
Page 338: Network Settings And Common Problems
Network Settings and Common Problems Here are frequently asked questions on network. Select a connection method you are using, or you want to use. Wireless LAN Wireless Direct Wired LAN Wireless LAN Cannot Find Printer Cannot Find Printer while Using Wi-Fi Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) Cannot Proceed beyond Printer Connection Screen Printer is Not Found by Printer Find Screen of Setup...
Page 339 Cannot Connect Smartphone/Tablet to Wireless Router Checking Wireless Router Network Name (SSID) for Smartphone/Tablet Setting Up Using Smartphone/Tablet Cannot Print/Scan from Smartphone/Tablet Downloading Canon PRINT Inkjet/SELPHY Problems while Using Printer Message Appears on Computer During Setup Printer Prints Slowly Wireless Direct...
Page 340 LAN Setting Tips/Changing LAN Settings Forgot Administrator Password of Printer Checking Network Information Restoring to Factory Defaults Default Network Settings Connects to Another Computer via LAN/Changes from USB to LAN Connection Printing Network Settings Reconfiguration Method of LAN Connection/Reconfiguration Method of Wi-Fi Connection Checking Status Code Problems while Using Printer Message Appears on Computer During Setup...
Page 341: Network Communication Problems
Network Communication Problems Cannot Find Printer on Network Network Connection Problems Other Network Problems...
Page 342: Cannot Find Printer On Network
Cannot Find Printer on Network While performing printer setup: Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) Cannot Proceed beyond Printer Connection Screen While using printer: Cannot Find Printer while Using Wi-Fi...
Page 343: Cannot Find Printer On Check Printer Settings Screen During Setup (Windows)
Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) If the printer cannot be found and the Check Printer Settings screen appears after searching the printer by Automatic search on the Search for Printers screen during driver setup, click Redetect and search for the printer again by the IP address on the Search for Printers screen.
Page 344: Power Status
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Power Status Are printer and network device (router, etc.) turned on? Make sure the printer is turned on. Checking that Power Is On Make sure network device (router, etc.) is turned on. If printer or network device is off: Turn on printer or network device.
Page 345: Pc Network Connection
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking PC Network Connection Can you view any web pages on your computer? Make sure the computer and network device (router, etc.) are configured and the computer is connected to the network.
Page 346: Printer's Wi-Fi Settings
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Printer's Wi-Fi Settings Is printer set to allow wireless communication? Make sure the icon is displayed on the LCD when the mode button is pressed. If icon is not displayed: The printer is not set to allow wireless communication.
Page 347: Wi-Fi Environment
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Wi-Fi Environment Is the printer connected to the wireless router? Use the icon on the LCD when the mode button is pressed to make sure the printer is connected to the wireless router.
Page 348 Printing Network Settings For details, see the instruction manual supplied with the wireless router or contact the manufacturer. After taking measures above, click Redetect on the Check Printer Settings screen to redetect the printer. If the printer is found, follow the instructions on the screen to continue to set up network communication. If the printer cannot be detected, the printer is not connected to the wireless router.
Page 349: Printer's Ip Address
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Printer's IP Address Is printer's IP address specified correctly? If printer's IP address is not specified correctly, the printer may not be found. Make sure whether printer's IP address is not used for another device. To check the printer's IP address, print out the network settings information.
Page 350: Security Software Settings
• If a firewall message appears: If a firewall message appears warning that Canon software is attempting to access the network, set the security software to allow access. After allowing the software to access, click Redetect on the Check Printer Settings screen to redetect the printer.
Page 351: Wireless Router Settings
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Wireless Router Settings Check wireless router settings. Check wireless router network connection settings, such as IP address filtering, MAC address filtering, encryption key, and DHCP function. Make sure the same radio channel is assigned to the printer and the wireless router. To check the settings of the wireless router, see the instruction manual supplied with the wireless router or contact the manufacturer.
Page 352: Checking Lan Cable And Router
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking LAN Cable and Router Is LAN cable connected, and are printer and router on? Make sure the LAN cable is connected. Make sure the printer is turned on. Checking that Power Is On Make sure the router is turned on.
Page 353: Checking Pc Network Connection
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking PC Network Connection Can you view any web pages on your computer? Make sure the computer and network device (router, etc.) are configured and the computer is connected to the network.
Page 354: Cannot Find Printer On Check Printer Settings Screen During Wired Lan Setup (Windows)-Checking Printer's Wired Lan Settings
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking Printer's Wired LAN Settings Is printer set to allow wired communication? Make sure the icon is displayed on the LCD when the mode button is pressed. If icon is not displayed: The printer is not set to allow wired communication.
Page 355: Checking Printer's Ip Address
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking Printer's IP Address Is printer's IP address specified correctly? If printer's IP address is not specified correctly, the printer may not be found. Make sure whether printer's IP address is not used for another device.
Page 356: Cannot Find Printer On Check Printer Settings Screen During Wired Lan Setup (Windows)-Checking Security Software Settings
• If a firewall message appears: If a firewall message appears warning that Canon software is attempting to access the network, set the security software to allow access. After allowing the software to access, click Redetect on the Check Printer Settings screen to redetect the printer.
Page 357: Checking Router Settings
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking Router Settings Check router settings. Check router network connection settings such as IP address filtering, MAC address filtering, and DHCP function. For more on checking the settings of the router, refer to the instruction manual supplied with the router or contact its manufacturer.
Page 358: Cannot Proceed Beyond Printer Connection Screen
Cannot Proceed beyond Printer Connection Screen If you cannot proceed beyond the Printer Connection screen, check the following. Make sure USB cable is securely plugged in to printer and computer. Check1 Connect the printer and the computer using a USB cable as the illustration below. The USB port is located at the back of the printer.
Page 359 2. Turn off printer. 3. Restart computer. 4. Make sure you have no application software running. 5. Click here and perform setup.
Page 360: Cannot Find Printer While Using Wi-Fi
Cannot Find Printer while Using Wi-Fi Make sure printer is turned on. Check1 If not, make sure the printer is securely plugged in and press ON button to turn on. The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit. Check the icon on LCD.
Page 361 To check the network name (SSID) set for the printer, print out the network setting information. Printing Network Settings Note • IJ Network Device Setup Utility allows you to diagnose and repair the network status. Select the link below to download IJ Network Device Setup Utility and install it. Checking Printer Connection Status Using IJ Network Device Setup Utility See below for starting up IJ Network Device Setup Utility.
Page 362 Make sure security software's firewall is off. Check9 If your security software's firewall is on, a message may appear warning you that Canon software is attempting to access the network. If this warning message appears, set security software to always allow access.
Page 363: Network Connection Problems
Network Connection Problems Printer Suddenly Stopped Working for Some Reason Network Key (Password) Unknown Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings...
Page 364: Printer Suddenly Stopped Working For Some Reason
Printer Suddenly Stopped Working for Some Reason Cannot Connect to a Printer after Network Configuration Changes Cannot Connect to a Printer via Wireless LAN (Wi-Fi) Cannot Connect to a Printer through Wireless Direct Cannot Connect to a Printer via Wired LAN Cannot Print/Scan/Fax through Network Cannot Connect to a Printer after Network Configuration Changes It may take a while for the computer to obtain an IP address, or you may need to restart your computer.
Page 365 To check the settings of the wireless router, refer to the instruction manual provided with it or contact its manufacturer. Note • Use 2.4 GHz frequency band to connect to a wireless router. Match the network name (SSID) set for the printer with that for 2.4 GHz frequency band of the wireless router.
Page 366 Make sure security software's firewall is off. Check9 If your security software's firewall is on, a message may appear warning you that Canon software is attempting to access the network. If this warning message appears, set security software to always allow access.
Page 367 Select Device settings > LAN settings > Wireless Direct > Switch WL Direct in this order and select Yes. Check the settings of your device (smartphone/tablet). Check3 Make sure Wi-Fi is enabled on your device. For details, refer to your device's instruction manual. Make sure printer is selected as connection for device (e.g.
Page 368 Make sure the LAN cable is connected properly. Check2 Make sure the printer is connected to the router with the LAN cable. If the LAN cable is loose, connect the cable properly. If the LAN cable is connected to the WAN side of the router, connect the cable to the LAN side of the router. If the problem is not resolved, click here and redo setup.
Page 369: Network Key (Password) Unknown
Network Key (Password) Unknown WPA/WPA2 or WEP Key Set for Wireless Router Unknown, Cannot Connect Setting an Encryption Key WPA/WPA2 or WEP Key Set for Wireless Router Unknown, Cannot Connect For more on setting up a wireless router, see the instruction manual provided with the wireless router or contact its manufacturer.
Page 370 For macOS: Starting Up IJ Network Device Setup Utility Selecting WPA, WPA2, or WPA/WPA2 is recommended for security reason. If your wireless router is compatible with WPA/WPA2, you can also use WPA2 or WPA. • Using WPA/WPA2 (Windows) The authentication method, Wi-Fi password, and dynamic encryption type must be identical among the wireless router, the printer, and your computer.
Page 371: Printer Cannot Be Used After Replacing Wireless Router Or Changed Router Settings
Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings When you replace a wireless router, redo the network setup for the printer according to the replaced one. Click here and perform setup. Note • IJ Network Device Setup Utility allows you to diagnose and repair the network status. Select the link below to download IJ Network Device Setup Utility and install it.
Page 372 If using WPA/WPA2 key or a password, make sure encryption key for Check3 computer, network device, and printer matches key set for wireless router. The length or format of the Wi-Fi password and authentication method must be identical among the wireless router, the printer, and your computer.
Page 373: Other Network Problems
Other Network Problems Checking Network Information Restoring to Factory Defaults...
Page 374: Checking Network Information
Printing Network Settings For Windows, you can check the network setting information on the computer screen. Canon IJ Network Device Setup Utility Screen Checking Computer IP Address or MAC Address To check the IP Address or MAC address of your computer, follow the instructions below.
Page 375 3. Click TCP/IP to check the IP address, or click Hardware to check the MAC address. Checking Communication Between the Computer, the Printer, and the Wireless Router Perform a ping test to check if communication is taking place. • For Windows: 1.
Page 376 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms --- XXX.XXX.XXX.XXX ping statistics --- 3 packets transmitted, 3 packets received, 0% packet loss If "100% packet loss" appears, communication is not taking place. Otherwise, computer is communicating with target device.
Page 377: Restoring To Factory Defaults
Restoring to Factory Defaults Important • Initialization erases all network settings on the printer, making printing/scanning/faxing operation from a computer over a network impossible. To use the printer over a network again after restoring it to the factory defaults, click here and redo setup. Initialize the network setting using the printer's operation panel.
Page 378: Problems While Printing/Scanning From Smartphone/Tablet
Problems while Printing/Scanning from Smartphone/Tablet Cannot Print/Scan from Smartphone/Tablet...
Page 379: Cannot Print/Scan From Smartphone/Tablet
Cannot Print/Scan from Smartphone/Tablet If you cannot print/scan from your smartphone/tablet, it is possible that your smartphone/tablet cannot communicate with the printer. Check the cause of your problem according to the connection method. Cannot Communicate with Printer over Wireless LAN Cannot Communicate with Printer while It Is in Wireless Direct Note •...
Page 380 To check the settings of the wireless router, refer to the instruction manual provided with it or contact its manufacturer. To check the current network settings of the printer, print out the network setting information. Printing Network Settings Note • IJ Network Device Setup Utility allows you to diagnose and repair the network status. Select the link below to download IJ Network Device Setup Utility and install it.
Page 381 Note • IJ Network Device Setup Utility allows you to diagnose and repair the network status. Select the link below to download IJ Network Device Setup Utility and install it. Checking Printer Connection Status Using IJ Network Device Setup Utility See below for starting up IJ Network Device Setup Utility.
Page 382 Printing Network Settings Have you entered the proper password specified for the Wireless Direct? Check5 To check the password specified for the printer, display it using the operation panel of the printer or print out the network setting information of the printer. •...
Page 383: Printing Problems
Printing Problems Printer Does Not Print Ink Does Not Come Out Ink Runs Out Fast Printer Does Not Pick up or Feed the Paper/"No Paper" Error Printout Results Are Unsatisfactory...
Page 384: Printer Does Not Print
Printer Does Not Print Make sure printer is turned on. Check1 If not, make sure the printer is securely plugged in and press ON button to turn on. The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit. Note •...
Page 385 The printer will not print properly if you are using a printer driver for a different printer. • For Windows: Make sure "Canon XXX series" (where "XXX" is your printer's name) is selected in the Print dialog box. Note • If multiple printers are registered to your computer, set your printer as default printer to make the one selected by default.
Page 386 Are you trying to print a large data file? (Windows) Check8 If you are trying to print a large data file, it takes a long time to start printing. If the printer does not start printing after a certain period of time, select On for Prevention of Print Data Loss on the Print Options dialog box.
Page 387: Ink Does Not Come Out
Ink Does Not Come Out Although some air may enter the ink tube, it is not a malfunction. No problem if the nozzle check pattern is printed correctly. Make sure joint button is not lifted up. Check1 Push the print head locking cover to make sure the print head is installed properly. Next, push the joint buttons firmly to the end.
Page 388 ◦ For macOS: Clean the print head If it does not improve, clean the print head again. If it still does not improve, go to the next step. Clean the print head deeply. Step3 After cleaning the print head deeply, print the nozzle check pattern and check the result. •...
Page 389: Ink Runs Out Fast
Ink Runs Out Fast After you refill the ink tank, the printer takes in ink from the ink tank and ink flows into the printer. Ink may seem to run out fast due to this procedure.
Page 390: Printer Does Not Pick Up Or Feed The Paper/"No Paper" Error
Printer Does Not Pick up or Feed the Paper/"No Paper" Error Make sure paper is loaded. Check1 Loading Paper When loading paper, consider the following. Check2 • When loading two or more sheets of paper, align the edges of the sheets before loading the paper. •...
Page 391 If the paper tears in the rear tray, see List of Support Code for Error (Paper Jams) to remove it. If there are any foreign objects in the rear tray, be sure to turn off the printer, unplug it from the power supply, then remove the foreign object.
Page 392 Check9 Rear View for the positions of the transport unit cover and the rear cover. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair. Important • Do not tilt the printer when moving it since the ink may leak out.
Page 393: Printout Results Are Unsatisfactory
Check the settings on your PictBridge (Wi-Fi) compliant device or using the operation panel. PictBridge (Wi-Fi) Print Settings PictBridge settings • Printing from your smartphone/tablet using Canon PRINT Inkjet/SELPHY: Check the settings on Canon PRINT Inkjet/SELPHY. Print Photos from Your Smartphone Make sure appropriate print quality is selected (see list above).
Page 394 This setting cannot be made on the PictBridge (Wi-Fi) compliant device. If problem is not resolved, check also the sections below. Check3 See also the sections below: Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/Streaks or Lines Colors Are Unclear Lines Are Misaligned/Distorted Paper Is Smudged / Printed Surface Is Scratched Vertical Line Next to Image...
Page 395: Printouts Are Blank/Blurry Or Fuzzy/Inaccurate Or Bleeding Colors/Streaks Or Lines
Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/ Streaks or Lines Although some air may enter the ink tube, it is not a malfunction. No problem if the nozzle check pattern is printed correctly. Make sure joint button is not lifted up. Check1 Push the print head locking cover to make sure the print heads are installed properly.
Page 396 ◦ For macOS: Printing a Nozzle Check Pattern If the pattern is not printed correctly, go to the next step. Clean the print head. Step2 After cleaning the print head, print the nozzle check pattern and check the result. • From the printer Cleaning the Print Head •...
Page 397 If you use the printer until the ink tank becomes empty, perform ink flush after refilling the ink tank. Refilling Ink Tanks How to Perform Ink Flush When using paper with one printable surface, check the correct printable side Check5 of the paper.
Page 398: Colors Are Unclear
Colors Are Unclear Although some air may enter the ink tube, it is not a malfunction. No problem if the nozzle check pattern is printed correctly. Make sure joint button is not lifted up. Check1 Push the print head locking cover to make sure the print heads are installed properly. Next, push the joint buttons firmly to the end.
Page 399 ◦ For Windows: Printing a Nozzle Check Pattern ◦ For macOS: Printing a Nozzle Check Pattern If the pattern is not printed correctly, go to the next step. Clean the print head. Step2 After cleaning the print head, print the nozzle check pattern and check the result. •...
Page 400: Lines Are Misaligned/Distorted
Lines Are Misaligned/Distorted Check paper and print quality settings. Check1 Printout Results Are Unsatisfactory Perform print head alignment. Check2 If printed lines are misaligned/distorted or print results are otherwise unsatisfactory, adjust the print head position. Aligning the Print Head Note •...
Page 401: Paper Is Smudged / Printed Surface Is Scratched
Paper Is Smudged / Printed Surface Is Scratched Paper Is Smudged Smudged Edges Smudged Surface Printed Surface Is Scratched Check paper and print quality settings. Check1 Printout Results Are Unsatisfactory Check paper type. Check2 Make sure you are using the right paper for what you are printing. Supported Media Types Correct curl before loading paper.
Page 402 1. Roll up paper in opposite direction to paper curl as shown below. 2. Check that paper is now flat. We recommend printing curl-corrected paper one sheet at a time. Note • Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward. Follow the instructions below to curl the paper outward up to 0.1 in.
Page 403 2. Open Canon IJ Printer Assistant Tool. Opening the Maintenance Tool (Canon IJ Printer Assistant Tool) 3. Select Custom Settings. 4. Select Prevents paper abrasion check box and select OK. 5. Check message and select OK. • From computer (macOS): Adjust the setting to prevent paper abrasion from Remote UI.
Page 404 1. Check that printer is turned on. 2. Open Canon IJ Printer Assistant Tool. Opening the Maintenance Tool (Canon IJ Printer Assistant Tool) 3. Select Custom Settings. 4. Drag Ink Drying Wait Time slide bar to set the wait time and select OK.
Page 405: Vertical Line Next To Image
Vertical Line Next to Image Is loaded paper size correct? Check If the loaded paper is larger than the size you specified, vertical lines (A) may appear in the left margin or the both margin. Set the paper size to match the loaded paper. Printout Results Are Unsatisfactory Note •...
Page 406: Scanning Problems (Macos)
Scanning Problems (macOS) Scanning Problems...
Page 407: Scanning Problems
Scanning Problems Scanner Does Not Work Scanner Driver Does Not Start...
Page 408: Scanner Does Not Work
Scanner Does Not Work Check that your scanner or printer is turned on. Check 1 With network connection, check the connection status and reconnect as Check 2 needed. With USB connection, connect the USB cable to a different USB port on the Check 3 computer.
Page 409: Scanner Driver Does Not Start
Scanner Driver Does Not Start Make sure the application software supports AirPrint. Check 1 Select your scanner or printer on the application's menu. Check 2 Note • The operation may differ depending on the application. Scan and save images with IJ Scan Utility Lite and open the files in your Check 3 application.
Page 410: Error Message Is Displayed
Error Message Is Displayed Your scanner may be locked. Check If IJ Scan Utility Lite or the application is running, exit it. Slide the scanner lock switch to the release position ), then reconnect the USB cable. Refer to the printed manual: Getting Started for how to unlock the scanner.
Page 411: Scanning Does Not Start / Scanning Does Not Complete
Scanning Does Not Start / Scanning Does Not Complete Your scanner may be locked. Check If IJ Scan Utility Lite or the application is running, exit it. Slide the scanner lock switch to the release position ), then reconnect the USB cable. Refer to the printed manual: Getting Started for how to unlock the scanner.
Page 412: Items Cannot Be Scanned Correctly
Items Cannot Be Scanned Correctly Your scanner may be locked. Check If IJ Scan Utility Lite or the application is running, exit it. Slide the scanner lock switch to the release position ), then reconnect the USB cable. Refer to the printed manual: Getting Started for how to unlock the scanner.
Page 413: Faxing Problems
Faxing Problems Problems Sending Faxes Problems Receiving Faxes Telephone Problems Poor Quality Fax Received...
Page 414: Problems Sending Faxes
Problems Sending Faxes Cannot Send a Fax Errors Often Occur When Send a Fax...
Page 415: Cannot Send A Fax
Cannot Send a Fax Is power turned on? Check1 • You cannot send faxes if the power is turned off. Press the ON button to turn the power on. • If you unplugged the power cord without turning off the power (the ON lamp is lit), reconnecting it turns on the power automatically.
Page 416 Fax settings Is Dial tone detect set to ON? Check6 Resend the fax after a while. If you still cannot send the fax, select OFF for Dial tone detect in Adv. fax settings under Fax settings. Fax settings Is fax/telephone number registered correctly in printer's directory? Check7 Check the recipient's fax/telephone number, correct the fax/telephone number registered in the printer's directory, and then send the document again.
Page 417 If the telephone line is connected correctly, there is a problem with your telephone line. Contact your telephone company and the manufacturer of your terminal adapter or telephone adapter.
Page 418: Errors Often Occur When Send A Fax
Errors Often Occur When Send a Fax Check telephone line condition or connection. Check If errors occur frequently when using an Internet telephone, it is possible that they can be reduced by selecting Reduce for Err reduction (VoIP) on Adv. fax settings under Fax settings. For details, see Err reduction (VoIP).
Page 419: Problems Receiving Faxes
Problems Receiving Faxes Cannot Receive a Fax/Cannot Print a Fax/"Received in memory" Appears...
Page 420: Cannot Receive A Fax/Cannot Print A Fax/"Received In Memory" Appears
Cannot Receive a Fax/Cannot Print a Fax/"Received in memory" Appears Is power turned on? Check1 • You cannot receive faxes if the power is turned off. Press the ON button to turn the power on. • If you unplugged the power cord without turning off the power (the ON lamp is lit), reconnecting it turns on the power automatically.
Page 421 Is telephone line cable connected to external device jack? Check4 Reconnect it to the telephone line jack. Connecting Telephone Line Check the operation panel is open. Check5 If the operation panel is closed, received faxes will be stored in the printer's memory without being printed (Memory Reception).
Page 422: Telephone Problems
Telephone Problems Cannot Dial Telephone Disconnects During a Call...
Page 423: Cannot Dial
Cannot Dial Is telephone line cable connected correctly? Check1 Check that the telephone line cable is connected correctly. Connecting Telephone Line Is telephone line type of printer or external device set correctly? Check2 Check the telephone line type setting and change it as necessary. Setting Telephone Line Type...
Page 424: Telephone Disconnects During A Call
Telephone Disconnects During a Call Is telephone line cable or telephone (or a peripheral device such as an external Check telephone, an answering device, or a computer modem) connected correctly? Check that the telephone line cable and the telephone (or a peripheral device such as an external telephone, an answering device, or a computer modem) are connected correctly.
Page 425: Poor Quality Fax Received
Poor Quality Fax Received Check scan settings of sender's fax device. Check1 Ask the sender to adjust the scan settings of the fax device. Is ECM RX set to OFF? Check2 Select ON for ECM RX in Adv. communication in Adv. fax settings under Fax settings. If ECM RX is enabled, the sender's fax device resends the fax after correcting errors automatically.
Page 426: Mechanical Problems
Mechanical Problems Printer Does Not Turn On Printer Turns Off Unexpectedly or Repeatedly USB Connection Problems Cannot Communicate with Printer via USB Wrong Language Appears in LCD...
Page 427: Printer Does Not Turn On
Unplug printer, leave it for at least 2 minutes, and then plug it back in and turn Check3 on again. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important • Do not tilt the printer when moving it since the ink may leak out.
Page 428: Printer Turns Off Unexpectedly Or Repeatedly
The setting to shut off the power automatically is disabled. • To disable the setting from the computer: For Windows, use Canon IJ Printer Assistant Tool or ScanGear (scanner driver) to disable the setting. Follow the procedure below to disable the setting using Canon IJ Printer Assistant Tool.
Page 429 Note • See below for details on how to disable the setting from ScanGear (scanner driver). Scanner Tab...
Page 430: Usb Connection Problems
USB Connection Problems Make sure of the checking item below when you find one of the followings. • Printing/Scanning is slow. • Hi-Speed USB connection does not work. • A message such as "This device can perform faster" appears. (Windows) Note •...
Page 431: Cannot Communicate With Printer Via Usb
Cannot Communicate with Printer via USB Make sure printer is turned on. Check1 Connect USB cable properly. Check2 As the illustration below, the USB port is at the back of the printer. Important • Connect the "Type-B" terminal to the printer with the notched side facing UP. For details, refer to the instruction manual supplied with the USB cable.
Page 432: Wrong Language Appears In Lcd
Wrong Language Appears in LCD Follow the instructions below to select your language. 1. Press Setup button and wait a little. 2. Press button 2 times and press OK button. 3. Press button 4 times and press OK button. 4. Use button to select language for LCD and press OK button.
Page 433: Installation And Download Problems
Installation and Download Problems Failed to MP Drivers Installation (Windows) Updating MP Drivers in Network Environment (Windows)
Page 434: Failed To Mp Drivers Installation (Windows)
Failed to MP Drivers Installation (Windows) If you cannot get past the Printer Connection screen: Other cases: If you cannot get past the Printer Connection screen: Cannot Proceed beyond Printer Connection Screen Other cases: If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart your computer, and then reinstall the MP Drivers.
Page 435: Updating Mp Drivers In Network Environment (Windows)
Updating MP Drivers in Network Environment (Windows) Download the latest MP Drivers. Download the latest MP Drivers for your model on the download page of the Canon website. Uninstall the existing MP Drivers and follow the installation instructions to install the latest MP Drivers that you downloaded.
Page 436: Errors And Messages
Errors and Messages Four-Digit Alphanumeric Characters Appear on LCD When Error Occurred Message (Support Code) Appears...
Page 437: Four-Digit Alphanumeric Characters Appear On Lcd
Four-Digit Alphanumeric Characters Appear on LCD A message appears on the printer's LCD or your computer screen. Some errors may display four-digit alphanumeric characters along with the error message. The characters represent a "support code" (error number). For details on each support code, see List of Support Code for Error.
Page 438: When Error Occurred
When Error Occurred If an error occurs in printing, for example if the paper runs out or jams, a troubleshooting message appears automatically. Take the appropriate action described in the message. When an error occurs, a message is displayed on the computer or on the printer. For some errors, a support code (error number) is also displayed.
Page 439: Message (Support Code) Appears
Message (Support Code) Appears This section describes some of the messages that may appear. Note • A support code (error number) is displayed for some errors. For details on errors that have support code, see List of Support Code for Error.
Page 440 • Hang up phone The handset is not placed in the handset cradle correctly. Replace the handset correctly. Note • See A Message for Faxing Is Displayed on Fax Standby Screen for the message displayed on the fax standby screen. Error Regarding Automatic Duplex Printing Is Displayed See Automatic Duplex Printing Problems and take the appropriate action.
Page 441 Check3 Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and reinstall them from the Setup CD-ROM or the Canon website. When printer is connected to your computer with a USB cable, check device Check4 status from your computer.
Page 442 • "Printer driver could not be found" Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and reinstall them from the Setup CD-ROM or the Canon website. • "Could not print Application name - File name"...
Page 443: List Of Support Code For Error
List of Support Code for Error Support code appears on the printer's LCD and your computer screen when errors occur. A "support code" is an error number, and appears along with an error message. When an error occurs, check the support code displayed on the printer's LCD and computer screen and take the appropriate action in response.
Page 444 • 6000 to 6ZZZ 6000 6001 6004 6500 6800 6801 6830 6831 6832 6833 6900 6901 6902 6910 6911 6920 6921 6930 6931 6932 6933 6936 6937 6938 6939 693A 6940 6941 6942 6943 6944 6945 6946 6A80 6A81 6D01 •...
Page 445: List Of Support Code For Error (Paper Jams)
List of Support Code for Error (Paper Jams) If paper jams, remove it following the appropriate procedure as shown below. • If you can see the jammed paper at the paper output slot or the rear tray: 1300 • If you cannot see the jammed paper at the paper output slot or the rear tray: ◦...
Page 446 1300 Cause Paper is jammed when feeding paper from rear tray. What to Do If the paper fed from the rear tray is jammed, remove the jammed paper from the paper output slot or from the rear tray following the instructions below. Important •...
Page 447 • We recommend using paper sizes other than A5 to print documents with photos or graphics. A5 paper may curl and jam as it leaves the printer. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 448 1303 Cause Paper is jammed when feeding paper from cassette. What to Do 1. Remove jammed paper. • If the paper is jammed at the paper output slot: 1300 • If the paper is jammed inside the printer: Paper Is Jammed inside Printer •...
Page 449 If the measures above do not solve the problem, contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted. • Do not tilt the printer when moving it since the ink may leak out.
Page 450 1304 Cause Paper is jammed when performing automatic duplex printing. What to Do 1. Remove jammed paper. • If the paper is jammed at the paper output slot: 1300 • If the paper is jammed inside the printer: Paper Is Jammed inside Printer •...
Page 451 The printer resumes printing. Reprint the page you were printing if it was not printed properly due to the paper jam. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 452 1313 Cause Paper is jammed as printer pulled in printed paper. What to Do If the paper is jammed as the printer pulled in the printed paper, try to remove the paper from the following locations. • Paper output slot 1300 •...
Page 453: Paper Is Jammed Inside Printer
Paper Is Jammed inside Printer If the jammed paper tears and you cannot remove the paper from the paper output slot / the feed slot of the cassette / the rear tray, or if the jammed paper remains inside the printer, remove the paper following the instructions below.
Page 454 If you soil or scratch this part by touching it with paper or your hand, it could damage the printer. 3. Check if jammed paper is under print head holder. If the jammed paper is under the print head holder, move the print head holder to the far right or left, whichever makes it easier to remove the paper.
Page 455 Check the printer again for any remaining bits of paper. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 456 Important • Do not tilt the printer when moving it since the ink may leak out. • When transporting the printer for repairing it, see Repairing Your Printer.
Page 457: Removing Jammed Paper From Rear Side
Removing Jammed Paper from Rear Side Important • The printer cannot be turned off while it is sending or receiving a fax, or when the received fax or the unsent fax is stored in the printer's memory. Turn off the printer after making sure it has completed sending or receiving all the faxes. Do not unplug when turning off the printer.
Page 458 5. Slowly pull out paper. Note • Do not touch the inner parts of the printer. If you were not able to remove the paper in this step, detach the transport unit cover and remove the paper by following these steps. 1.
Page 459 2. Slowly pull out paper. Note • Do not touch the inner parts of the printer. 3. Make sure all jammed paper is removed. 4. Attach transport unit cover. Insert the transport unit cover slowly all the way into printer and take down the transport unit cover.
Page 460 6. Attach rear cover. Insert the projections of the right side of the rear cover into the printer, and then push the left side of the rear cover until it is closed completely.
Page 461 • Before printing, open the operation panel, pull out the paper output tray, and then open the output tray extension. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair. Important •...
Page 462 1000 Cause Possible causes include the following. • There is no paper in the rear tray. • Paper is not loaded in the rear tray properly. What to Do Take the corresponding actions below. • Load paper in the rear tray. Loading Paper in the Rear Tray •...
Page 463: Paper Is Not In The Cassette (1003)
Paper is Not in the Cassette (1003) Cause Possible causes include the following. • There is no paper in the cassette. • Paper is not loaded in the cassette properly. What to Do Take the corresponding actions below. • Load paper in the cassette. Loading Paper in the Cassette Note •...
Page 464 1200 Cause Scanning unit / cover is open. What to Do Close the scanning unit / cover and wait for a while. Do not forget to close it, such as after refilling ink tanks.
Page 465 Cause Ink absorber is almost full. What to Do Press the printer's OK button to continue printing. Contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
Page 466: Shipping Tape Etc. Are Still Attached (1890)
Shipping Tape etc. Are Still Attached (1890) Cause Shipping tape or protective material may still be attached to print head holder. What to Do Open the scanning unit / cover and make sure that shipping tape and protective material have been removed from the print head holder.
Page 467 2110 Cause Paper settings for printing or copying do not match cassette paper information set on printer. Note • See below for the correct correspondence between paper settings made on the printer driver or on the printer. Paper Settings on the Printer Driver and the Printer (Media Type) (Windows) Paper Settings on the Printer Driver and the Printer (Paper Size) (Windows) •...
Page 468 For example, if the paper setting specified on the printer driver is A5, and cassette paper information is set to A4, change the paper in the cassette to A5 paper and proceed with printing. Once you have inserted the cassette after changing the paper, the screen for setting cassette paper information appears.
Page 469 2113 Cause Paper settings for printing or copying do not match either rear tray or cassette paper information set on printer. Note • See below for the correct correspondence between paper settings made on the printer driver or on the printer. Paper Settings on the Printer Driver and the Printer (Media Type) (Windows) Paper Settings on the Printer Driver and the Printer (Paper Size) (Windows) •...
Page 470 Replace the paper Select this option to print or copy after changing the paper in the rear tray or the cassette. For example, if the paper setting specified on the printer driver is A5, and rear tray and cassette paper information are set to A4, change the paper in the rear tray or the cassette to A5 paper and proceed with printing.
Page 471 2114 Cause Paper settings for printing or copying do not match rear tray paper information set on printer. Note • See below for the correct correspondence between paper settings made on the printer driver or on the printer. Paper Settings on the Printer Driver and the Printer (Media Type) (Windows) Paper Settings on the Printer Driver and the Printer (Paper Size) (Windows) •...
Page 472 For example, if the paper setting specified on the printer driver is A5, and rear tray paper information is set to A4, change the paper in the rear tray to A5 paper and proceed with printing. Once you have closed the feed slot cover after changing the paper, the screen for setting rear tray paper information appears.
Page 473 4103 Cause Cannot perform printing with current print settings. What to Do Press the printer's Stop button to cancel printing. Then change the print settings and retry printing.
Page 474 Turn off the printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
Page 475 Turn off the printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
Page 476 If you soil or scratch this part by touching it with paper or your hand, it could damage the printer. Turn the printer back on. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important •...
Page 477 • From the operation panel of the printer: How to Perform Ink Flush If this does not solve the problem, contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
Page 478 Cause Printer error has occurred. What to Do Contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted. • Do not tilt the printer when moving it since the ink may leak out.
Page 479 Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
Page 480 Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted.

This manual is also suitable for:

Pixma g7000 series Pixma g7050 Pixma g7040 Pixma g7020 Pixma g7065 3114c008

Canon PIXMA G7070 Online Manual

Quick Links

Related Manuals for Canon PIXMA G7070

Summary of Contents for Canon PIXMA G7070