Connecting A Dvd Or Blu-Ray Player; Hdmi (Best); Av (Good) - Sharp LC-55LBU711U User Manual

Connecting a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection type
available. See Jacks and controls
You can connect a DVD or Blu-ray player using:

• HDMI (best)

• AV (good)

HDMI (best)
HDMI jack
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI® cable (not provided) to one of the HDMI jacks on your TV and to the HDMI® out jack on the DVD or
Blu-ray player.
3 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 On the Home screen, press
AV (good)
Video and audio jacks
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the AV jacks on your TV and to the AV out jacks on the DVD or Blu-ray player.
3 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 If needed, set the player to the correct output mode. See the documentation that came with the player.
5 On the Home screen, press
14
on page 9.
or to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
Note
An HDMI® cable carries both audio and video. You do not need to use any
audio cables.
Note
Cables are often color-coded to match color-coded jacks.
Important
When you connect the audio using the AV jacks, the audio output is analog.
or to highlight the AV tile, then press OK.
HDMI® cable
AV cable
LED TV
DVD or Blu-ray
player
DVD or Blu-ray
player