Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug.
instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use.
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured from water supply connections. recyclable materials in accordance with our National Environment 3. Drain the remaining water in Regulations.
Dishwasher Overview Upper basket Cutlery basket Lower basket Automatic Liquid/Gel Detergent and Rinse Aid Dosing System Type Label Control panel Door Lower impeller Salt reservoir lid 10. Filters 11. Upper impeller 12. Upper basket rail 13. Upper cutlery basket ( depends on model ) 14.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be installed...
Installation Permitted water temperature: floor. A discharge hose longer than 4 meters up to 25°C ( 60°C for products causes dirty washing. equipped with Aquasafe+; please Attach the water discharge hose to the refer toAquasafe+ section ) drainpipe without bending it. Tightly fix the The dishwasher may not be connected to water discharge hose to the drainpipe in open warm water devices or flow-through...
Installation Aquasafe+ The voltage and allowed fuse or • breaker protection are specified in the (depends on model) “Technical specifications” section. If the The Aquasafe+ system protects against current value of the fuse or breaker in water leaks that may occur at the hose inlet. the house is less than 16 Amps, have Water contact with the valve box of the a qualified electrician install a 16 Amp...
PreparatIon Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy-efficient Washing, rinsing and drying performance manner. of your dishwasher will improve when the Wipe away any coarse food remnants on the water softening system is adjusted correctly.
Page 13
PreparatIon Make the necessary Unpack the test Dip in the test strip Take out the strip Wait for 1 minute. Open the tap and adjustment strip. into the water for 1 from the water and let the water flow for according to the test second.
PreparatIon 3. Add 1 litre of water to salt reservoir of Even though your machine is your machine only in initial use. equipped with Automatic Water Hardness Detection System, 4. Add salt to the salt compartment. To speed up dissolution rate of salt in water hardness setting is done water, stir it with a spoon.
Page 15
PreparatIon Your dishwasher is equipped with an Please follow the instructions Automatic Liquid/Gel Detergent Dosing given in section “Operating the System. Product” to change the settings Thanks to this system, the amount of rinse of the Automatic Liquid/Gel aid and liquid/gel detergent required for the Detergent Dosing System and selected washing programme is adjusted Rinse Aid.
PreparatIon Adding Liquid/Gel The rinse aid used in Detergent and Rinse Aid dishwashers is a special product that is recommended to increase The Automatic Liquid/Gel Detergent Dosing drying efficiency and prevent system is found on the door of your water or lime stains on the dishwasher.
Page 17
PreparatIon Do not fill the liquid/gel If a different brand or type of detergent box with liquids or liquid/gel detergent will be used, chemical cleaners (vinegar, make sure previous detergent is bleacher etc.) other than liquid/ depleted completely and then gel detergent.
PreparatIon follow the above steps in reverse order to Poor quality detergent re-install the detergent and rinse aid boxes. Hard water area without the use of Rinse Aid Powder Detergents Old or scratched crockery. (If you have You can find the correct amount any kind of surface damage to cups, you of powder detergent for the are far more likely to see stains.)
Page 19
PreparatIon When you switch to powder detergent from tablet detergent: Make sure that salt and rinse aid reservoirs are full. 2. Set the water hardness to the highest level and perform an empty run. 3. After the empty washing cycle, review the user manual and readjust the water hardness level so as to suit the water Place the tablet detergent into...
Page 20
PreparatIon Placing the dishes into the dishwasher You can use your dishwasher in the optimum way with respect to energy consumption and washing and drying performance only if you place the dishes in an orderly way. Wipe away any coarse food remnants •...
Page 21
PreparatIon Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware Dishwasher / User’s Manual 21 / 50 EN...
PreparatIon Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner.
PreparatIon Collapsible lower basket Bringing the tines to the tines horizontal position by holding them from the tips may cause (depends on model) them to bend. Therefore, it will There are foldable tines (A) located at the be appropriate to bring the tines in the middle to horizontal or lower basket of the machine are designed vertical position by holding them...
PreparatIon SoftTouch Accessory (depends on model) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses. Bringing the tines to the horizontal position by holding them from the tips may cause them to bend.
PreparatIon Lower basket multipurpose Make sure that the impeller does / height adjustable service not touch the dishes you placed rack on the racks. (depends on model) To close the racks: This accessory located at the lower basket Fold the rack (A). of your machine allows you to easily wash 2.
PreparatIon Lower basket bottle wire Upper basket multipurpose service rack (depends on model) The bottle wire is designed for easier (depends on model) washing of long pieces with wide mouths. This accessory located at the upper basket You may take out the bottle wire from the of your machine allows you to easily wash basket when not in use by pulling it out from pieces such as extra long ladles and bread...
PreparatIon Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B).
PreparatIon Collapsible upper basket Height setting with empty wires basket (depends on model) (depends on model) You can use collapsible wires when you need In this model, the height setting of the upper a larger space for your dishes in the upper basket may be changed using the wheels basket of your machine.
PreparatIon Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc.
OPERATING THE PRODUCT 3” Display 5. Function keys 2. On/Off key Remote Control function 3. Start/Pause/Cancel key b) Menu direction selection key / Fast+ Function SteamGloss Function 4. Time Delay key c) Settings menu key (3 sec.) / AquaIntense Function d) Menu direction selection key / 6.
OPERATING THE PRODUCT Keys Preparing the machine On/Off key Open the door of the dishwasher. It is used to switch on or off the machine. 2. Place the dishes in accordance with the Press the On/Off key for 1 second to switch instructions in the user manual.
Page 32
OPERATING THE PRODUCT /50 EN Dishwasher / User’s Manual...
OPERATING THE PRODUCT Auxiliary functions AquaIntense Function AquaIntense impeller Washing programmes of your dishwasher located under the are designed to obtain the best cleaning lower impeller helps effect, considering the type of the soil, washing your heavily soiling degree and properties of the dishes soiled dishes places in to be washed.
Page 35
OPERATING THE PRODUCT Submenu Functions: (depends on the model) Doormatic Function Off/On Tablet Detergent Function Off/On EverClean Function Off / On Inner Illumination lamp off / on For products with inner illumination, the lamp turns on when the door is opened. Automatic Liquid/Gel Detergent function Off/ Detergent use setting: Level 1: 10 ml lower than the default value...
OPERATING THE PRODUCT Interior Lighting 3. Set the desired time by pressing the (depends on the model) Time Delay key. Time will increase with Some models have interior lighting to increments of 30 minutes up to 6 hours illuminate the interior when the door is and after that in 1 hour increments up to 24 hours every time you press the key.
Page 37
OPERATING THE PRODUCT Starting the programme The machine will remain silent To start your machine after selecting the in pause mode for some time programme and auxiliary functions, press in order to remove the water in Start / Pause / Cancel key. the machine and on the dishes Once the programme starts a tune is played completely and to have the...
OPERATING THE PRODUCT Adjusting the amount of To deactivate the Child Lock: Pres Child (Key) Lock keys rinse aid simultaneously and hold for 3 seconds. After switching on your machine, press 2. "3", "2", "1" is displayed on Display the Settings Menu key. After seeing the Information Line and key lock is countdown 3-2-1 on the display, cancelled.
OPERATING THE PRODUCT End of programme End of Programme indicator will light up once the washing programme is over. Press the On/Off button to turn off your machine. 2. Close the tap. 3. Unplug the machine from the socket. For energy saving, the product is automatically turned off following the completion of the programme or if the programme...
HOMEWHIZ FUNCTION You can check your dishwasher and learn If you are using the application for the first about its status via your smart device with time, complete the registration process with the HomeWhiz function. your e-mail address on the application. Once you've completed the registration process, HomeWhiz only runs on a you can use all HomeWhiz supported...
Page 41
HOMEWHIZ FUNCTION 8. Once your dishwasher is connected Follow the steps below to use to the selected network, you need to an already setup dishwasher connect to the same network on your through a new account. smart device. If your smart device does Create a new account and use this not get connected automatically, go account to log into the HomeWhiz...
HOMEWHIZ FUNCTION HomeWhiz on/off Once the wireless connection has been Press the remote control key to enable the turned “On”, your machine will connect function. to the home network by using the setup settings you made before. Deleting the HomeWhiz settings While the product is on, press and hold the Remote Control and Delay keys for 5 seconds The display when HomeWhiz is enabled.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in order cleaned at regular intervals. for the machine operates efficiently. Check if Unplug the product and turn off food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 47
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 48
Troubleshooting Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. •...
Page 49
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 50
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.