Advertisement
■ Attach the projector to the ceiling bracket
q
Slide the projector bracket attached to the projector over the ceiling bracket attached to the ceiling
as shown in the figure below.
* Be careful not to drop the projector while this process. Although the projector is supported, it
is not secured in place.
w
Use the fastening plates (x2) and the screws (x4) included with the projector bracket (sold
separately) to attach the projector bracket to the ceiling bracket, and be sure to securely tighten the
screws.
To prevent the projector from falling
* To prevent the projector from falling, use the securing wires included with the projector
bracket (sold separately), etc., after carefully reading the Assembly and Installation Manual.
Screw (M6 x 12mm)
Phillips head hex bolt with integrated
spring washer and flat washer.
Fastening plate
ネジ（M3×8mm）
Screw (M3 x 8mm)
ばね座金組込み
Phillips head machine screw
十字穴付きナベ小ネジ
with integrated spring washer.
* Before attaching the Projector bracket to the projector, first read each
Projector bracket (sold separately) Assembly and Installation Manual.
ネジ（M6×12mm）
ばね座金と平座金組込み
十字穴付き六角ボルト
固定板
Screw (M6 x 12mm)
ネジ（M6×12mm）
Phillips head hex bolt with integrated
ばね座金と平座金組込み
spring washer and flat washer.
十字穴付き六角ボルト
固定板
Fastening plate
Screw (M3 x 8mm)
ネジ（M3×8mm）
ばね座金組込み
Phillips head machine screw with integrated
十字穴付きナベ小ネジ
spring washer.
3
Advertisement
