Placing The Carpet Feet - Philips DL8780 Manual

English
12

Placing the carpet feet

1 Open the battery compartment at the back of the device.
2 Insert the batteries (4x 1.5V AAA alkaline) into the battery compartment
according to the polarity indications marked inside the compartment.
-
The digits "8888" will show on the display.
3 Close the battery compartment and wait until the digits "0.0lb" are
shown on the display. You can change measurement 'Setting the
measurement unit' section.
Soft surfaces such as carpet will affect the performance of the device.
Always install the supplied carpet feet in case you place the device on a soft
surface to prevent the soft surface from affecting the performance.
1 Remove the non-slip pads from the feet of the device.