Installing Batteries In The Remote Control - Epson Pro L20002UNL User Manual

4. Press the buttons on the sides of the lens cover and pull the lens cover off the projector.
5. Hold the lens firmly as you release the lens lock. Pull the black lever up (1), pinch the metal tab
against the lever, move it toward the Release position until it stops (2), and then push the black lever
in as shown (3).
6. Remove the lens from the projector.
7. If you are not attaching a different lens right away, replace the lens cover and lens cover cap to
protect the projector.
Parent topic:
Related tasks
Adjusting the Image Position Using Lens Shift

Installing Batteries in the Remote Control

The remote control uses the two AA batteries that came with the projector.
Attaching and Removing a Lens
48