Table of Contents
Advertisement
11. Firmware Installation
and Update
The firmware is the operating system (OS) installed on the device.
11.1 Firmware Installation
If it is the first time that you are installing a SATA HDD (no matter it is a new one
or an old one) into the player, please make sure you have read the following steps in
advance.
Step 1: Backup Data
Please backup the data in the HDD before installing it into the player. The
following steps will format the hard disc, which will erase all data currently
stored on the hard disc.
Step 2: Install the HDD
Follow the HDD Installation Guide, and install the HDD into the player.
Step 3: Prepare the USB Pen Drive
You will need a USB Pen Drive for firmware installation. Copy the 6 files
from the firmware folder to the root directory of your USB Pen Drive.
Step 4: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of the player.
Step 5: Hold the STANDBY button
Press and hold the STANDBY button on the front panel, and do not
loosen.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Movie Cube R700 500GB and is the answer not in the manual?
Questions and answers