Connecting To Your Printer; Snow Leopard (10.6) And Leopard (10.5) - Oki ES7411 Network Manual

C
ONNECTING TO YOUR PRINTER
If you have not already done so, run the Oki software installer before following the steps
below.
S L (10.6)
NOW EOPARD
USB
1. Choose Apple Menu > System Preferences > Print & Fax.
2. If the printer is already in the list of printers, click "-" to remove it.
NOTE
This is necessary as Leopard may not be using the correct printer driver files.
3. Click "+" to add a new printer.
4. Ensure the Default tab is selected and select your printer from the list.
> Your printer is displayed as type USB in the list of available printers.
> Ensure that the Print Using: selection matches your printer. If Generic
PostScript Printer is displayed, select a driver that matches.
5. Click Add.
6. Click Configure... and ensure the hardware options displayed match your printer.
NOTE
Hardware options are not configured automatically.
The printer is added to the list of printers.
7. Restart your computer.
Bonjour
1. Choose Apple Menu > System Preferences > Print & Fax.
2. Click "+".
3. Select your printer model from the Default Browser.
4. Click Add....
5. Depending on the connection type, you may be prompted to configure any additional
printer hardware options. If your printer has options such as a storage device or
second tray, switch on the relevant options.
AppleTalk (Leopard only)
NOTE
AppleTalk is not supported in Snow Leopard.
1. Choose Apple Menu > System Preferences > Print & Fax.
2. Click "+".
3. Select your printer model from the Default Browser.
4. Click Add....
5. Depending on the connection type, you may be prompted to configure any additional
printer hardware options. If your printer has options such as a storage device or
second tray, switch on the relevant options.
L (10.5)
AND EOPARD
Mac OS X > 43