Table of Contents
Advertisement
v
The video output cable is connected to this video output connector.
Important:
• Be sure to turn off the power of each device before connection.
• Be sure to secure the coaxial cable connectors.
Connect a coaxial cable to the video output connector.
220 - 240V ~ 50Hz
WV-CP500L
b
Use a cable tie (locally procured) to attach the coaxial cable to the camera
mount bracket.
Important:
• The cable tie shall be made of metallic or durable material to be strong enough because the tie
plays the role of camera drop prevention measures in case.
• When the camera mount bracket is mounted on a wall, be sure to observe the mounting height
described on the illustration above.
<Installation sample on a ceiling>
Camera mount
bracket (option)
ALARM OUT
POWER
GND
VIDEO OUT
The cable shall be
tied to the camera
mount bracket to
avoid slack.
Coaxial cables
To video input
<Installation sample on a wall>
Camera mount
bracket (option)
The cable shall be
tied to the camera
mount bracket to
avoid slack.
More than
270 cm
Floor
17
Advertisement
Table of Contents
