Table of Contents
Advertisement
is recalled, which allows for a subset of the routing matrix to be changed. Mute will output blank Video or
silent Audio for the given Destination level and is not supported on all routers/levels.
2.3.1 Loading Work Matrix from a source target
The Work Matrix can be loaded from the current Active Routing matrix or a Preset. Simply select the desired
source target from the "Select target" drop down list and click the Load button.
2.3.2 Saving Work Matrix to a target
The Work Matrix can be saved to one or more targets including the Active Routing matrix or a Preset.
Simply select the desired destination target from the "Select target" drop down list and click the Save button.
When saving to the Active Routing matrix, the connections defined in the Work Matrix will become
immediately active for the current routing state, allowing for batch routing operations to be performed and
executed simultaneously. Saving to a Preset will store the Work Matrix state to non volatile memory, which
persists through device power cycles and can be recalled at a later time.
2.3.3 Usage scenarios
The flexibility of the Presets Tab interface allows for several useful scenarios, some of which are described
below:
Batch connection operations – To perform several connection operations all at the same time: make the
•
desired connection changes to the Work Matrix, leaving all others as "No Change", and then apply the
changes to the Active Routing target by selecting it from the "Select target" drop down and clicking the
Save button.
Store Active Routing matrix state to a Preset – The entire Active Routing matrix state can be stored
•
to a Preset by first loading it to the Work Matrix, followed by selecting the desired target Preset and
clicking the Save button.
Editing an existing Preset – Editing a Preset is done by loading it to the Work Matrix, making the
•
desired changes and saving it back to the same Preset. All this is accomplished without changing the
Active Routing matrix state.
2.4 Labels Tab
Page 14 of 61
MSC-HD44AAS Product Manual
© 2013-2018 Matrix Switch Corporation
www.matrixswitch corp.com
Advertisement
Table of Contents
