Table of Contents
Advertisement
13. Remove the two screws on each side to detach the CD-ROM bracket.
14. Disconnect the floppy power cable and IDE cable.
15. Remove the two screws to remove the FDD.
16. Pull the FDD out from chassis.
17. Press the fan holder to release the cables.
18. Disconnect the IDE cable and FDD cable.
19. Disconnect the system fan power cable from mainboard.
20. Press the fan holder to release the rear fan.
21. Push left direction to take the rear fan out from chassis.
22. Disconnect the 24 PIN power cable, 4 PIN signal cable and 8 PIN power cable.
61
Altos G520
Advertisement
Table of Contents
