Contents 1 Important Safety Notice 2 Your Wireless Microphone and Bluetooth Speaker ® Introduction What's in the box Overview of the unit 3 Get started Connect power Switch on the Bluetooth speaker ® Install/replace microphone batteries 4 Play Sing along through the wireless microphone Play from a Bluetooth enabled device...
1 Important o Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Safety Warning • Never remove the casing of this apparatus. a Read these instructions. • Never lubricate any part of this apparatus. •...
Your product contains batteries, which cannot equipment. be disposed of with normal household waste. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V.
Page 6
U.S. and other countries. The Bluetooth word mark and logos are ® registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Philips is under license. Note • The type plate is located on the back of the unit.
Philips offers, register your product at www.philips.com/welcome. Overview of the unit If you contact Philips, you will be asked for the model and serial number of this apparatus. The Wireless microphone model number and serial number are on the back of the apparatus.
Page 8
d Power indicator h AUDIO-IN • Light up red when the wireless • Connect an external audio player microphone is switched on. through a 3.5mm audio input cable (not supplied). • Flash red when the battery level is low. i AC MAINS~ Bluetooth speaker ®...
3 Get started Switch on the Bluetooth ® speaker • Press on the top of the Bluetooth ® Always follow the instructions in this chapter in speaker. sequence. » The power indicator lights up white. » The Bluetooth indicator flashes blue Connect power slowly. •...
Page 10
Open the battery compartment and take out the battery cartridge. Insert 3 x AAA batteries (supplied) into the cartridge with correct polarity (+/-) as indicated. Push back the battery cartridge, then close the battery compartment. Note • If you are not going to use the microphone for a long time, remove the batteries.
4 Play After successful installation, run The Voice: On Stage on the iPad. Sing along through the wireless microphone Note • The effective operation range between the wireless microphone and Bluetooth speaker is ® approximately 10 meters (30 feet). Slide the OFF/ON switch on the wireless Dock your iPad onto the Bluetooth ®...
Find and download a tutorial from The Voice: On Stage, then tap SING for how to sing along through the wireless • Always update the app to the latest version. microphone and Bluetooth speaker. ® • If automatic pairing fails, press and hold on the speaker for more than 10 seconds to pair the microphone with the speaker manually.
Page 13
Press on the top of the Bluetooth Select 'PHILIPS_AEA7000' on your ® speaker. Bluetooth enabled device and if necessary ® » The Bluetooth indicator flashes blue input '0000' as the paring password. ® quickly. » After successful pairing and connection, the Bluetooth indicator on the ®...
Charge the iPad Play and charge your iPad through the dock connector The docked iPad begins to charge as soon as directly the unit is connected to AC power. Compatible iPad Play from an external device This unit supports play and charge of the following iPad models: You can also listen to an external audio player •...
5 Product Dimensions (W x H x D) information • Speaker 300 x 124 x 156mm • Microphone 162 x 317 x 162mm Weight Note • Speaker 1.3 kg • Microphone 0.3kg • Product information is subject to change without prior notice.
If the problem remains microphone and Bluetooth speaker ® unsolved, go to the Philips Web page (www. are within the the effective operation philips.com/support). When you contact Philips, range, that is, approximately 10 meters make sure that the device is nearby and the (30 feet).