Table of Contents
Advertisement
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of this product.
1
Press TREBLE +/- or BASS +/- to change
the frequency.
Synchronize video and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1
Press AUDIO SYNC +/- to synchronize
the audio with the video.
Night mode
For quiet listening, night mode decreases the
volume of loud sounds when audio is played.
Night mode is only available for Dolby Digital
soundtracks.
1
Press NIGHT to turn night mode on or
off.
•
When night mode is turned on, ON
NIGHT (night on) scrolls once on the
display panel.
When night mode is turned off, OFF
•
NIGHT (night off) scrolls once on the
display panel.
USB storage devices
Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
Tip
•
If you cannot play USB on this product, update your
product with the latest software offered on www.
philips.com/support.
What you need
•
A USB storage device that is formatted for
FAT or NTFS file systems, and complies
with the Mass Storage Class.
•
An MP3 file on a USB storage device.
1
Connect a USB storage device to the
SERVICE (USB) connector on this product.
2
Press and hold
for more than 5 seconds.
» This product switches to USB mode.
3
Use the remote control to control play.
•
Press
to start, pause or resume
play.
•
Press
/
next track.
•
During USB play, press NIGHT to
toggle: repeat all tracks in one folder
and repeat off.
•
When repeat mode is turned
on, ALL RPT scrolls once on the
display panel.
•
When repeat mode is turned
off, OFF RPT scrolls once on the
display panel.
Note
•
If a USB storage device has a large media library, it takes
some time to load those contents.
•
This product may not be compatible with certain types
of USB storage device.
•
If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•
Digital camera PTP and MTP protocols are not
supported.
•
Do not remove the USB storage device while it is
being read.
•
Support a USB port: 5V
MP3 player
Connect your MP3 player to play your audio
files or music.
What you need
•
An MP3 player.
•
A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on this product.
on the remote control
to skip to the previous or
500mA.
EN
11
Advertisement
Table of Contents
