Sealey ES1000 Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Safe for Live
instructions working
1. SAFETY
WARNING! Ensure health & safety, local authority and general workshop practice regulations are strictly adhered to when using this
‰
product.
Familiarise yourself with the product application and limitations, as well as the specific potential hazards peculiar to this product.
9
WARNING! This insulating sheet is intended to be used exclusively for electrical purposes.
‰
WARNING! Always use with additional electrical insulation PPE.
‰
WARNING! Always use with electrically insulated tools suitable for 1000V safe live working.
‰
DO NOT bend, fold or compress the insulating sheet.
8
DO NOT store or use close to excessive heat.
8
DO NOT expose to direct sunlight for long period.
8
Store at an ambient temperature between 10ºC and 21ºC.
9
Avoid contact with chemical products.
9
2. INTRODUCTION
Soft insulated sheet suitable for insulating during work in progress where live connectors may be present. Maximum operating voltage 1000V
AC. Tested in accordance with IEC 61112. Always use with additional electrical insulation PPE.
3. SPECIFICATION
Model no: .................................................................. ES1000
Maximum operating voltage: ................................. 1000V AC
Sheet size: ......................................................... 1.0m x 1.3m
4. OPERATION
4.1. Before use,visually inspect the insulating sheet for any defects. If the sheet becomes punctured or damaged it MUST NOT be used.
4.2. Position insulating sheet to provide maximum protection to user (fig 1).
Insulating sheet can be fixed in place with insulated clamps or insulating PVC sticky tape, not supplied.
5. MAINTENANCE
5.1. If the insulating sheet becomes dirty, wash it with soap and water and dry thoroughly.
© Jack Sealey Limited
ELECTRICAL INSULATING SHEET 1 X 1.3M
MODEL NO:
Wear protective Wear protective
gloves clothing
Original Language Version
ES1000
fig.1
fig.1
ES1000 Issue 1 07/02/21