Bios Setup Utility; Navigating The Bios Utility - Acer Aspire 5755 Service Manual

System Utilities

BIOS Setup Utility

The BIOS Setup Utility is a hardware configuration program built into a computer's BIOS
(Basic Input/Output System).
The utility is pre-configured and optimized so most users do not need to run it. If configuration
problems occur, the setup utility may need to be run. Refer to
when a problem arises.
To activate the utility, press
of screen.
The default parameter of F12 Boot Menu is set to Disabled. To change the boot device
without entering BIOS Setup Utility, set the parameter to Enabled.
To change the boot device without entering the BIOS SETUP, press F12 during POST to
enter the multi-boot menu.

Navigating the BIOS Utility

Five menu options are:

Information

Main

Security

Boot

Exit
To navigate through the following:

Menu - use the left and right arrow keys

Item - use the up and down arrow keys

Change parameter value - press F5 or F6.

Exit - Press Esc

Load default settings - press F9. Press F10 to save changes and exit BIOS Setup Utility
NOTE:
NOTE:
Parameter values can be changed if enclosed in square brackets [ ]. Navigation
keys appear at the bottom of the screen. Read parameter help carefully when
making changes to parameter values. Parameter help is found in the Item
Specific Help area of the screen.
NOTE:
NOTE:
System information is subject to specific models.
System Utilities
during POST (power-on self-test) when prompted at the bottom
F2
Chapter 4, Troubleshooting
0
0
2-3