Epson Discproducer PP-100NII Administrator's Manual page 72

Hide thumbs Also See for Discproducer PP-100NII:
Table of Contents

Advertisement

Error Message
Disc pickup
error (ST1/2)
Disc release
error
Discs ejected
from ST2?
Drive tray
open/close error
Fan control
error
Ink cartridge
cover open
Ink problem
(C,LC,LM,M,Y,K)
Internal drive
error (DRV 1/2)
The arm cannot pick up the disc in the stacker. If the indicated
stacker is an input stacker, fully separate and reload the discs
in the stacker.
The arm cannot release the disc.
Do not remove the disc by hand. This could damage the arm.
Turn off the power of the product, and then turn it on again.
During the initialization operation of the product, the arm
releases the disc. If the same error message still appears, repair
is required. Please contact Customer Support.
Perform the procedure below.
1. Remove the published discs from Stacker 2.
2. Refill the discs if necessary.
3. Press the
button.
Note: In Batch Mode, if Stacker 2 is removed during publishing
progress, it is always recognized as the input stacker when
loaded again.
-When the drive tray does not come out-
Turn off the power, and then turn it on again. If the drive
trays still does not come out, see "Drive tray does not come
out" on page 87 in this guide. If the same error message
appears again, repair is required. Please contact Customer
Support.
-When the drive tray does not close-
Remove any remaining discs, turn off the power, and then
turn on the power again. If the same error message still
appears, repair is required. Please contact Customer Support.
Turn off the power, and then turn it on again. If the same error
message still appears, repair is required. Please contact Customer
Support.
Close the ink cartridge cover.
This product is currently operating.
Close the ink cartridge cover.
An invalid ink cartridge is installed.
Replace the cartridge of the displayed color. (See "Changing
the Ink Cartridge" in the PP-100NII User's Guide.)
Turn off the power, and then turn it on again. If the same error
message still appears, repair is required. Please contact Customer
Support.
Remedy
Troubleshooting
Notification
Sound
72

Advertisement

Table of Contents
loading

Table of Contents