Never Operate the appliance unattended! PRECAUTION: Veuillez lire attentivement les consignes de sécurité et les instructions d’utilisa- tion avant l’utilisation initiale de ce produit. Ne jamais faire fonctionner l'appareil sans surveillance! Model • Modèle • DDW611WLED...
This Owner’s Use and Care Guide will provide you with valuable information necessary for the proper care and mainte- nance of your new appliance. If properly maintained, your Danby appliance will give you many years of trouble free operation. Please take a few moments to read the instructions thoroughly and familiarize yourself with all of the operational aspects of this appliance.
• If the supply cord is damaged, it must be replaced by a qualified person in order to avoid a hazard. • Remove the door of the dishwasher when discarding it. • Please dispose of packing materials properly. • Use the dishwasher only for its intended function.
Operating Instructions READ AND FOLLOW ALL OPERATING INSTRUCTIONS To get the best performance from your dishwasher, read all operating instructions before using it for the first time. CONTROL PANEL QP1QH H QP1QH H okp0 1) Power on light: To come on when Power ON/OFF button is pressed down.
ATTENTION Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance. WHEN TO REFILL THE RINSE DISPENSER The amount of rinse aid can be judged by the color of the optical level indicator “C”...
PROPER USE OF DETERGENT • Detergents with chemical ingredients are necessary to remove dirt and remove it from the dishwasher. • Use only detergent specifically made for use in dishwashers. Keep your detergent fresh and dry.
Page 8
DETERGENT DISPENSER The dispenser must be refilled before the start of each wash cycle follow- ing the instructions provided in the Wash Cycle Table . Your dishwasher uses less detergent and rinse aid than a conventional dishwasher. Generally, only one tablespoon of detergent is needed for a normal wash load.
Page 9
Operating Instructions PRIOR TO USING FOR THE FIRST TIME B. FUNCTION OF DETERGENT (cont) FILL IN DETERGENT Fill the detergent dispenser with detergent.The marking indicates the dosing levels, as illustrated below: Can hold 15g of detergent. (Pre-wash chamber) Can hold 25g of detergent. (Normal wash chamber) Please see the manufacturers recommendations for the amount of deter- gent to use as stated on the detergent packaging.
• Consider buying utensils which are identified as dishwasher-proof. • For particular items, select a program with a low temperature. • Do not take glass and cutlery out of the dishwasher immediately after the program (wash cycle) has ended as they may be hot.
Operating Instructions LOADING THE DISHWASHER BASKETS LOADING THE BASKET Position the dishes and cookware so that they will not get moved by the spraying water. Dinner plates Plate racks in Basket The basket is fitted with plate racks which can be stowed horizontal if required.
Operating Instructions LOADING THE DISHWASHER BASKETS CUTLERY BASKET Cutlery should be placed in the cutlery basket with handles at the bottom. If the rack has side baskets, spoons should be loaded individually into the appropriate slots, especially long utensils should be placed in the horizon- tal position at the front of the upper basket as shown.
Rinse (55°C) Pre-wash Starting a washcycle... Draw out the basket (see the section entitled Loading the Dishwasher). Pour in the detergent and insert the plug into the socket. The power supply is 120V/60 Hz. Make sure that the water supply is turned on to full pressure.
AT THE END OF THE WASH CYCLE You can modify the washing program when the dishwasher just runs for a short time. Otherwise, the detergent may have already been released, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled.
THE APPLIANCE ABOUT POWER CONNECTION The installation position of the dishwasher should be near the exist- ing inlet and drain hoses and power cord. One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of the dishwasher.
Your dishwasher comes equipped with a 'quick connect' assembly (includes inlet and drain hose). The faucet adapter must be installed on the faucet before you can connect the dishwasher. This adapter is included inside your dishwasher. The faucet adapter is compatible with faucets inclusive of either male (outside) or female (inside) threaded faucet connections.
Page 17
(to avoid damage to threads). 3. Connect the star-shaped connection of the inlet hose to the inlet port on the back of the dishwasher cabinet. Do not over-tighten (to avoid damage to threads). 4. Connect the circular connection of the drain hose onto the longer (bottom) male connection on the quick connect.
FILTERING SYSTEM The following things should be checked before starting the dishwasher: The dishwasher is level and fixed properly The water inlet valve is open Is there a leakage at the connections of the conducts? The wires are tightly connected...
Step 3 to Step 1, the filter system will be installed. - Inspect the filters for blockage every time the dishwasher has been used. - By unscrewing the coarse filter you can remove the filter system.
• Seals One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a damp sponge will...
Occasionally a problem may arise that is minor in nature, and a service call may not be neccessary. Use this troubleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free Number 1-800-263-2629 for assistance. PROBLEM PROBLEM •...
Danby under this warranty shall be void. Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper.
Ce guide d’utilisation et d’entretien vous fournira des renseignements utiles nécessaires pour prendre soin de votre nouvel appareil et en assurer l’entretien. S’il est entretenu convenablement, vous pourrez utiliser votre appareil Danby sans problème pendant des années. Veuillez prendre quelques minutes pour lire les instructions d’un bout à l’autre et vous familiariser avec tous les aspects du fonctionnement de cet appareil.
Renseignements importants relatifs à la sécurité LISEZ ET RESPECTEZ TOUTES LES CONSIGNES RELATIVES À LA SÉCURITÉ Lors de l’utilisation de votre lave-vaisselle, prenez toutes les précautions indiquées ci-dessous : CONSIGNES RELATIVES À LA MISE À LA TERRE PRÉCAUTIONS RELATIVES À LA SÉCURITÉ...
Mode d’emploi LISEZ ET RESPECTEZ ENTIÈREMENT LE MODE D’EMPLOI Pour obtenir les meilleurs résultats avec votre lave-vaisselle, lisez le mode d’emploi d’un bout à l’autre avant d’utiliser l’appareil pour la première fois. PANNEAU DE COMMANDE QP1QH H QP1QH H okp0 1) Indicateur d’alimentation : s’allume lorsque l’on appuie sur le bouton ON/OFF (MARCHE/ARRÊT).
Mode d’emploi AVANT D’UTILISER L’APPAREIL POUR LA PREMIÈRE FOIS A. REMPLISSEZ LE DISTRIBUTEUR D’AGENT DE RINÇAGE OUVERTURE DU DISTRIBUTEUR Pour ouvrir le distributeur, tournez le bouchon sur la flèche « ouvert » (gauche), et levez-le pour l’enlever. Versez l’agent de rinçage dans le distributeur, en vous assurant de ne pas trop le remplir. Replacez le bouchon en l’insérant en alignement avec la flèche «...
Page 27
Mode d’emploi AVANT D’UTILISER L’APPAREIL POUR LA PREMIÈRE FOIS A. REMPLISSEZ LE DISTRIBUTEUR D’AGENT DE RINÇAGE (suite) B. FONCTION DU DÉTERGENT RÉGLAGE DU DISTRIBUTEUR D’AGENT DE RINÇAGE Le distributeur d’agent de rinçage a quatre réglages. Le réglage recommandé est « 3 ». Si la vaisselle ne sèche pas correctement ou est tachée, ajustez le cadran au numéro suivant, soit «...
Page 28
Mode d’emploi AVANT D’UTILISER L’APPAREIL POUR LA PREMIÈRE FOIS B. FONCTION DU DÉTERGENT (suite) COMPRIMÉS DE DÉTERGENT Les comprimés de détergent de différentes marques se dissolvent à des vitesses différentes. Pour cette raison, certains comprimés de détergent ne peuvent pas se dissoudre complètement et atteindre leur pleine puissance de nettoyage lors de programmes courts.
Page 29
Mode d’emploi AVANT D’UTILISER L’APPAREIL POUR LA PREMIÈRE FOIS B. FONCTION DU DÉTERGENT (suite) REMPLISSEZ LE DÉTERGENT Remplissez le distributeur de détergent. Le repère indique la quantité de détergent à utiliser, tel qu’illustré ci-dessous : Peut contenir 15 g de détergent. (compartiment de prélavage) Peut contenir 25 g de détergent.
Mode d’emploi CHARGEMENT DES PANIERS DU LAVE-VAISSELLE RECOMMANDATION LAVAGE DE LA COUTELLERIE/DE LA VAISSELLE AVANT/APRÈS LE CHARGEMENT DES PANIERS DU LAVE- VAISSELLE • Songez à acheter des ustensiles sur lesquels il est indiqué qu’ils vont au lave- vaisselle. • Pour des articles spécifiques, sélectionnez un programme à basse température. •...
Mode d’emploi CHARGEMENT DES PANIERS DU LAVE-VAISSELLE CHARGEMENT DU PANIER Positionnez la vaisselle et la batterie de cuisine de façon telle que les jets d’eau ne les déplaceront pas. Bol à fruits Assiettes à dîner Porte-assiettes dans le panier Le panier est rempli de porte-assiettes qui peuvent être repliés horizontalement au besoin.
Page 32
Mode d’emploi CHARGEMENT DES PANIERS DU LAVE-VAISSELLE PANIER À USTENSILES La coutellerie doit être placée dans le panier à ustensiles les manches vers le bas. Si le panier est équipé de paniers latéraux, les cuillers doivent être placées individuellement dans les fentes appropriées, et les ustensiles très longs doivent être placés horizontalement à...
Mode d’emploi COMMENT LANCER UN PROGRAMME DE LAVAGE TABLEAU DES CYCLES DE LAVAGE Sélection du cycle Programme Information Pour les charges les plus sales, telles que les chaudrons, les casseroles, et les plats contenant des aliments séchés qui ont reposé pendant quelque temps. Très sale Pour les charges normalement sales, telles que les chaudrons,...
Mode d’emploi COMMENT LANCER UN PROGRAMME DE LAVAGE CHANGEMENT DU PROGRAMME VOUS AVEZ OUBLIÉ UN ARTICLE? À LA FIN DU CYCLE DE LAVAGE Vous pouvez changer le programme de lavage si le lave-vaisselle ne fonctionne que depuis quelques minutes. Autrement, il est possible que le détergent ait été libéré...
Notice d’installation PRÉPARATION EN VUE DE L’INSTALLATION POSITIONNEMENT DE L’APPAREIL CONCERNANT LE BRANCHEMENT ÉLECTRIQUE Le lave-vaisselle devrait être installé à proximité des tuyaux d’admission et de drainage existants et du cordon d’alimentation. Le côté de l’armoire de l’évier qui facilite le raccordement des tuyaux de drainage du lave-vaisselle doit être choisi.
Page 36
Notice d’installation RACCORDEMENT ÉLECTRIQUE Arrière du lave-vaisselle : 1. Orifice de drainage 2. Cordon d’alimentation 3. Orifice d’admission Votre lave-vaisselle est doté d’un raccord à branchement rapide (comprend l’admission et le tuyau de drainage). L’adaptateur de robinet doit être installé sur le robinet avant de pouvoir raccorder le lave-vaisselle.
Page 37
Notice d’installation RACCORDEMENT ÉLECTRIQUE (suite) 1. Vissez l’adaptateur de robinet sur (ou dans) le robinet. Vérifiez la présence de fuites (au besoin, utilisez du ruban de téflon pour les éliminer). 2. Branchez le raccord à six côtés du tuyau de drainage au connecteur de l’orifice de drainage, qui se trouve à...
Notice d’installation DÉMARRAGE DU LAVE-VAISSELLE Entretien SYSTÈME DE FILTRATION Les éléments suivants doivent être vérifiés avant de démarrer le lave- vaisselle : Le lave-vaisselle est de niveau et fixé correctement Le robinet d’admission du lave-vaisselle est ouvert Y a-t-il une fuite au niveau du raccordement des conduites? Les fils sont bien serrés L’appareil est allumé...
Page 39
Entretien SYSTÈME DE FILTRATION (suite) ENTRETIEN DU LAVE-VAISSELLE AVERTISSEMENT • Ne faites jamais fonctionner le lave-vaisselle si les filtres ne sont pas en place. • Le lave-vaisselle ne doit jamais être utilisé sans les filtres. • Si les filtres sont mal replacés, cela pourrait réduire la performance de l’appareil et endommager la vaisselle et les ustensiles.
Page 40
Entretien ENTRETIEN DU LAVE-VAISSELLE (suite) NETTOYAGE DES GICLEURS Les gicleurs peuvent être enlevés facilement pour un nettoyage périodique des bases, afin d’empêcher le blocage possible. Lavez-les à l’eau courante et remettez-les prudemment en place à la bonne position, en vous assurant que leur mouvement rotatif n’est pas bloqué.
Il peut arriver qu’un problème mineur se produise qui ne nécessite pas d’appel de service. Consultez ce guide de dépannage pour trouver une solution possible. Si l’appareil continue de mal fonctionner, appelez un atelier de réparation autorisé ou le numéro sans frais de Danby, au 1-800-263-2629, pour obtenir de l’assistance. PROBLÈME PROBLÈME...
à des fins commerciales, toutes les obligations de Danby en vertu de cette garantie seront annulées. Cette garantie indique en aucun temps la responsabilité de Danby de l’avarie ou dommage de la vin ou autre contenu, soit par les vices de l’appareil, ou soit parl’utilisation convenable ou inexacte.
Need help?
Do you have a question about the DDW611WLED and is the answer not in the manual?
Questions and answers