iClever IC-DK03 User Manual page 5

Q: How to enable direct access to F-keys or how to make F1-F12 keys
work correctly.
A: Your keyboard has by default access to the Media and Hotkeys such as
Volume Up, Play/Pause, Volume down , and so on.
If you prefer to have direct access to your F-keys simply press key of ~
on your keyboard to swap them.
Q: My keyboard fails to connect by 2.4G mode.
• Ensure you already press the key of
B .
• Verify the product or receiver is connected directly to the computer and
not to a hub, extender, switch, or something similar.
• Charge keyboard for 30 minutes.
• Move the receiver to a different USB port on your computer.
• Try on a different computer.
• Read above "Pairing Instruction" to re-pair your keyboard.
Q: My keyboard fails to connect by Bluetooth mode.
• Ensure the device you are trying to pair with is Bluetooth wireless-capable.
• Delete/remove previous Bluetooth connection record and turn off the
Bluetooth function on your devices and turn it on again.
• Ensure you already hold and press the button of
~
/
G
for 5
seconds until the indicator flashing blue.
• Charge the keyboard for 30 minutes.
• Try a different device .
Q: Delay typing in Win 10.
1. Use Windows shortcut keys Win
+
R to open Run.
, 2. Type into control and hit the Enter key. This will launch Control Panel.
(Note: If you cannot type into the proper letters, it is recommended
to use the on-screen keyboard.)
3. View by Small icons. Click the Keyboard .
-8-
4. In Keyboard Properties,
adjust the slider of Repeat
delay to an appropriate
situation that is close to Long.
Adjust the slider of Repeat rate
to an appropriate situation that
is close to Slow.
5. Click the Apply and the OK
button to save the changes.
Restart the computer and try
typing a word to see if the
double or multiple letters issue
still persists.
Q: Keyboard frequently get disconnected, keyboard get laggy when
typing, key gets stuck or responds intermittently, device connection
drops, device cannot be connected at .:111.
Troubleshooting Checklist
1. Restart your Bluetooth device.
2. Make sure that your iClever device and computer are within close
proximity of each other.
3. Try moving away at least 8 inches (20 cm) from metal and other sources
of wireless signal. Try moving away from:
---- Any device that could emit wireless waves: Microwave, cordless phone,
baby monitor, wireless speaker, garage door opener, WiFi router
---- Computer power supplies
---- Metal or metal wiring in the wall
-9-