Chapter 1, Calibrate the Test Set
Calibration Procedures
Calibration Procedures
List of Procedures
18
This chapter provides step-by-step procedures for performing the Test Set's
calibration routines.
To determine when each of the following calibration procedures should be
performed, refer to the HP 8924E Users Guide, "Recommended Calibration
Procedures."
If you are unfamiliar with the use of the cursor control knob, see
yourself with the CURSOR CONTROL knob." on page 19
CDMA Channel Level calibration - 8 minutes
Channel Power Measurement calibration - 2 minutes or more
RF Generator Level calibration - 15 seconds
Average Power Measurement zeroing - 2 seconds
RF Path Loss correction
"Familiarize
.