Page 1
Freeze Detector INSTALLATION INSTRUCTIONS Download the Lyric app To setup and use your new water leak and freeze detector, search for Honeywell Lyric in the App Store or Google Play. GET IT ON Lyric Before you begin Read these instructions carefully. Failure to follow these instructions can...
Page 2
Need help? If you need help any point during the installation and setup of the W1 Wi-Fi Water Leak and Freeze Detector, please contact Customer Care: Web: getconnected.honeywell.com For help, go to getconnected.honeywell.com...
What’s in the box? You should find: • Honeywell Lyric™ W1 Wi-Fi Water Leak and Freeze Detector • Three AA alkaline batteries • Optional cable sensor • Optional mounting screw...
Parts of your detector LED indicator Cable sensor Mounting keyhole (to hang on wall) Water sensors Cable sensor jack Sensor jack plug For help, go to getconnected.honeywell.com...
For the most part, this will be on the bottom level of your home or business, near water sources, or anywhere you think leaks are possible. Locations to consider: • Floor drain • Water heater • Sump pump • Washing machine • Kitchen • Sink • Toilet For help, go to getconnected.honeywell.com...
• Your Wi-Fi® password Download and install the app Go to the App Store or Google Play and search for Honeywell Lyric. Follow instructions to download and install the free Lyric app. After downloading, launch the app, register (if necessary), go to Menu, and then go to Add New Device.
Replace the battery cover. Press firmly around the edges to ensure a snug fit. Note: The cable sensor jack is NOT for plugging in a power adaptor. Plugging in a power adaptor could damage the detector. For help, go to getconnected.honeywell.com...
An audible alert will sound and your detector’s LED will turn solid blue to indicate your detector is paired. Press NEXT. Create a custom name for the detector or select one from the list. Press NEXT. For help, go to getconnected.honeywell.com...
Set the high and low levels for humidity and temperature warnings, and identify the people you want notified in case of an alarm. These settings can be updated at any time using the app. For help, go to getconnected.honeywell.com...
Note: The cable sensor jack is NOT for plugging in a power adaptor. Plugging in a power adaptor could damage the detector. For help, go to getconnected.honeywell.com...
Page 13
The mute command may take up to 1 minute to reach the detector. After you’ve addressed the cause of the alert, wipe dry the detector and cable sensor and put them back in place. Replace batteries if they were removed. For help, go to getconnected.honeywell.com...
Select the alert levels you want for humidity the same way you selected them for temperature. When you are done, press NEXT. For help, go to getconnected.honeywell.com...
Who else should receive emails? text box. Select the contact from your address book. Continue to add contacts until you are done. If you want to remove contacts, press the next to their name. Press Finish. For help, go to getconnected.honeywell.com...
The next scheduled update between the detector and the app is displayed in the bottom-right corner of the screen. To change the schedule see page 10. For help, go to getconnected.honeywell.com...
It can take up to one minute for Mute or Unmute commands to take effect. After you’ve addressed the cause of the alert, wipe dry the detector and cable sensor and put them back in place. For help, go to getconnected.honeywell.com...
Page 18
To restore internet connection, use the app or push one end of a paperclip into the detector’s reset hole. See “Reset” on page 20. Humidity outside of Low temperature WiFi connection Alerts and Activity desired range detected by device failure notification center For help, go to getconnected.honeywell.com...
This is simple to do using the app. Press the side menu button. Press Leak Detector. Press the current detector name you want to change, type the new name, then press the Back arrow. For help, go to getconnected.honeywell.com...
If you need to remove a detector from your account, it is easy to do using the app. Press the side menu button. Press Leak Detector. Press DELETE DEVICE. Press YES to confirm the deletion or NO to cancel it. For help, go to getconnected.honeywell.com...
Email Notification - determines if an alert will send out an email notification to your recipients. • Allowable temperature or humidity levels (anything outside this range causes an alert). When you are done, press the Back arrow. For help, go to getconnected.honeywell.com...
Press Email Contacts. To add recipients, press the text box and add an email address, or press the button to open your Contacts list and select a recipient. When you are done, press the Back arrow. For help, go to getconnected.honeywell.com...
Press EDIT. Press the button next to the recipient you want to remove. Press Delete to confirm. If you decide not to delete the recipient, press CANCEL. When you are done, press the Back arrow. For help, go to getconnected.honeywell.com...
Solid green Has power, Wi-Fi connection, and is operating normally. Note: LED turns off after 5 minutes to preserve battery life. Solid red Failed to connect to Wi-Fi. During operation Blinking red Detected a leak. For help, go to getconnected.honeywell.com...
In case of an alert, address the cause of the alert, then wipe dry the detector and cable sensor and put them back in place. Replace batteries if they were removed to silence the alert. For help, go to getconnected.honeywell.com...
Make sure the batteries are inserted correctly. If that does not correct the issue then put in new batteries. If the issue is not corrected contact the Honeywell helpline number that is available at getconnected.honeywell.com. Is the entire length of the cable sensor able to detect water? Yes, the entire 1.2 meter cable sensor detects water.
Page 27
B. Email notification is sent to the email address connected to your Lyric app that the issue is resolved C. Email notification is sent to other email recipients set up in your Lyric app that the issue is resolved For help, go to getconnected.honeywell.com...
Page 28
No. Added email accounts will receive notifications from all devices connected to the account. How far can the detector be from the router? The range of distance of the Wi-Fi signal is determined by your router. Check your router’s manual for additional information. For help, go to getconnected.honeywell.com...
EU only. If an item develops a fault, the product must be returned to the point of sale with: 1. Proof of purchase. 2. Full description of the fault. 3. All relevant batteries (disconnected). For help, go to getconnected.honeywell.com...
Humidity Alert Detection: below 20% RH or above 70% RH are default settings; can be changed by user Optional Cable Sensor Length: 1.2 m Wi-Fi Router Requirement: IEEE 802.11 b/g capable routers, 2.4 GHz Regulatory: CE marked For help, go to getconnected.honeywell.com...
Page 31
6 Batteries shall not be exposed to excessive heat such as sunshine, fire or the like (Push and Battery product only). CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent battery. 7 For Battery disposal see instructions in Manual. For help, go to getconnected.honeywell.com...