Table of Contents
Advertisement
PTZ camera (QNP-6320H/QNP-6250H)
Inside
a
b
Item
a
Lens
Lens for the camera.
b
Micro SD Card cover
Dust-resistant cover for the Micro SD card slot.
c
Micro SD Card slot
Compartment for the Micro SD card.
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J
d
If you reset the camera, the network settings will be adjusted so that DHCP can be
Reset button
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
16_ PTZ camera (QNP-6320H/QNP-6250H)
c
d
Description
Mounting surface
a
b
Item
a
Cable bushing
A waterproof rubber cap, which allows a network cable to go through it.
Hang this hook on the safety wire of the mount when installing this product to prevent it
b
Safety wire hook
from falling.
A port that connects to the PoE+ router and network cable for power and network
c
Network port
connection.
c
Description
Advertisement
Table of Contents
Need help?
Do you have a question about the QNP-6320H and is the answer not in the manual?
Questions and answers