OPERATION
Using the Weather Forecaster
Learning Mode
Self-Calibrating Forecasting uses a unique algorithm to analyze changes in pressure over
a time period (called Learning Mode) to determine your altitude. After 14 days, the
Learning Mode icon disappears from the display screen. At this point, the self-calibrated
pressure is tuned in to your location and the unit is ready for superior weather prediction.
Weather Forecast
AcuRite's patented Self-Calibrating Forecasting provides your personal forecast of
weather conditions for the next 12 to 24 hours by collecting data from the sensor in
your backyard. It generates a forecast with pinpoint accuracy - personalized for your
exact location.
RAIN/SNOW
MIX LIKELY
View the complete list of icons at www.AcuRite.com/acurite-icons
Troubleshooting
No outdoor sensor
reception
no bars
Display screen
not working
Outdoor
temperature
is flashing or
showing dashes
SNOW
RAIN
LIKELY
LIKELY
If the wireless signal indicator shows no bars:
• Relocate the display unit and/or the outdoor sensor. The
units must be within 330 ft (100 m) of each other.
• Make sure both units are placed at least 3 feet (.9 m)
away from electronics that may interfere with the wireless
communication (such as TVs, microwaves, computers, etc).
• Use standard alkaline batteries (or lithium batteries in sensor
when temperature is below -4ºF/-20ºC). Do not use heavy
duty or rechargeable batteries. NOTE: It may take up to
20 minutes for display unit and sensor to synchronize after
batteries are replaced.
• Check that the batteries are installed correctly. Batteries may
need to be replaced.
Flashing of the outdoor temperature is generally an indication
of wireless interference.
1. Bring both the sensor and display unit indoors and remove
at least one battery from each.
2. Make sure the A-B-C switch on both units match.
3. Reinstall the battery in the outdoor sensor.
4. Reinstall the battery in the display unit.
5. Let the units sit within a couple feet of each other for about
20 minutes to gain a strong connection.
CLOUDY
9
MOSTLY
CLOUDY
Need help?
Do you have a question about the 75107 and is the answer not in the manual?
Questions and answers
Can’t change from Celsius to Fahrenheit on 75107SBL. NO BUTTON OR UNIT TO CHANGE. THIS JUST CHANGED ON ITS OWN, BEEN WORKING FINE FIR YEARS.