Display Settings - Kenwood KMM-BT407DAB Instruction Manual

Display Settings

For : Zone identification for color settings and brightness
settings
For : Zone identification for brightness setting
For /
setting
Example:
: Zone identification for brightness
Set the dimmer
Press and hold DISP to turn on or off the dimmer.
• Once you press and hold this button, [DIMMER] setting (page 30) will be
overwritten.
Change the display settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press
[DISPLAY]
[COLOR SELECT] For
Selects illumination colors for [ALL ZONE], [ZONE 1] and [ZONE 2]
separately.
1 Select a zone. (See the illustration on left column.)
2 Select a preset color for the selected zone. (Page 30)
Default: [VARIABLE SCAN]
To make your own color, select [CUSTOM R/G/B]. The color you have made
will be stored in [CUSTOM R/G/B].
1 Press the volume knob to enter the detailed color adjustment.
2 Press S/T to select the color ([R]/[G]/[B]) to adjust.
3 Turn the volume knob to adjust the level ([0] to [9]), then press the knob.
.
Default: [XX]
:
ENGLISH
29