Table of Contents
Advertisement
Install the Top Rear Shipping Braces
1.
Install two cage nuts into the left rear rack post above the adapter bracket.
Position the top left shipping brace on the left rear rack post above the adapter.
2.
Insert and finger-tighten the guide pin in the appropriate hole for your server.
3.
Secure the brace with two M6 x 12-mm screws.
4.
5.
Repeat
Related Information
"Determine Correct Shipping Brace Fasteners" on page 47
■
"Install the Bottom Rear Shipping Brace" on page 49
■
48
SPARC T8-4 Server Installation Guide • September 2017
Step 1
through
Step 4
for the top right shipping brace.
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC T8-4 and is the answer not in the manual?
Questions and answers