Table of Contents
Advertisement
Step4
Use the up, down, right, and left buttons to determine the left upper position of the area to be set and press the setting button.
Note
• The area of the selected number is shown with green frame, and other selected areas are shown in white frame.
Step5
Use the up, down, right, and left buttons to determine the right lower position of the area to be set and press the setting button.
→ The mark "*" is displayed at the right of the number and the area is saved.
Note
• To delete the area, select the area number and press the setting button after moving the cursor to "DEL".
• To change the settings of the area, select the area number and repeat the procedure from step 3.
17
Advertisement
Table of Contents
