Let's get started... Getting started... Before you start Safety more detail... Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Technical and legal information CE Declaration of conformity Appendix Installation Information for EU66...
Before you start Before you start To avoid the risks that are always present when you use an electrical appliance it is important that this appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. Please keep this instruction booklet for future reference and pass it on to any future owners.
Page 8
Before you start Tools required Ø6mm Ø 125 mm or Ø 150 mm Accessories not supplied Recirculation Extraction CARBFILT4 (UK & IE) Ø125mm or Ø150mm VENT PACK 2 (UK & IE) SELF ADHESIVE ALUMINIUM TAPE CARBON FILTER ORDERING HOTLINE 0344 800 1128 (UK) 01 4475261 (IE)
Page 9
Safety These instructions are for your safety. Please read through them thoroughly prior to installation and retain them for future reference. • All installation work must be carried electrician. • This appliance must be installed correctly following the manufacturer’s instructions. This appliance complies with all current European safety legislation, however, the Manufacturer must emphasise that this compliance does not prevent...
Page 10
Safety Keep the appliance and its cord out of reach of children less than 8 years. Means for disconnection must be incorporated rules. An all-pole disconnection switch having a contact separation of at least 3 mm in all poles Regularly check the power plug and power cord for damage.
Page 11
Safety We also recommend that great care be taken during use and cleaning. Read the cleaning and maintenance sections for this appliance carefully. A steam cleaner is not to be used. The appliance is not intended to be operated by means of external timer or separated remote-control system.
Page 12
Safety Warning: The hood may stop working during an electrostatic discharge (e.g. lightning). This involves no risk of damage. Switch off the electricity supply to the hood and reconnect after one minute. regularly and closely watch and regulate pans containing hot oil. Do not use the hood if it shows signs of damage or imperfection.
more detail... Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Technical and legal information CE Declaration of conformity...
Product Functions Product functions This appliance extracts the air of the kitchen to remove the odours and keep an optimum level of the air quality inside the room, it also allows you to illuminate the cooking area. Operation Operation • Switch on the appliance at the switched fused connection unit. The appliance is ready for operation functions.
Care and maintenance Care and maintenance Warning: always switch off the electricity supply before carrying out maintenance work on the hood. In the event of a fault, contact customer services. Bulb replacement FUSE 10’ The Bulb may be hot, leave it 10 minutes before removing it.
Page 16
Care and maintenance CLIQUEZ 2 X ACTIVE CHARCOAL FILTER (NOT SUPPLIED). MODEL NUMBER CARBFILT4 (UK & IE).
Page 17
Care and maintenance Warning Always switch off the electricity supply before performing maintenance work. In the event of a fault, FUSE contact customer services. Exterior cleaning: use non-corrosive, liquid detergent and avoid the use of abrasive cleaning products. 1 MONTH MA .
Troubleshooting Troubleshooting Fault Cause Solution Excessive The Appliance is not hung Take down the appliance Vibration properly on the brackets. and check it is properly The fan blade is damaged. Switch off the appliance. Repair to be carried out by tightly.
Recycling and disposal Recycling and disposal Environmental protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. The symbol on the product or its packaging indicates that this product cannot be treated as normal household waste.
Page 20
Technical and legal information All installation work must be carried out by a Before connecting the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate inside the cooker hood. Warning: THIS APPLIANCE MUST NOT BE EARTHED.
Page 21
Technical and legal information Electrical Requirements Any permanent electrical installation must comply with the latest I.E.E. Regulations and local electricity company regulations. For roll of the National Inspection Council for Electrical Installation Contracting (NICEIC) should undertake the electrical installation. Electrical Connection Before connecting the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate inside the cooker hood.
We hereby certify that the mentioned accessory compliesw ith the essentialr equirementso ft he European Directives applicable, includingt heir modifications and the corresponding transpositions from the national law. MACHINE APPLICATION: AGS60PK, UBAGS60PK, UBAGSW60PK Decorative Cooker Hood TYPE: Comply with the European Directives 2006/95/EC: LVD...
Page 26
[14] [12] [12] x 6 [14] x 2 Maximum gap between top 2 holes and middle 2 holes can be no more than 785mm, dependant on ceiling height [01] [01] [14] [14] x 2 (4 x 32 mm) Position the hood over the top two screws then insert the bottom screws from inside the hood, tighten top 2 screws to secure.
Page 27
[06] [15] [15] x 2 [05] [05] [06] Fix the collar and the reducer if required. Vent Pack 2 (UK + IE) Fix the vent pack 2 using self adhesive aluminium tape.
Page 28
[04] [14] [04] [12] x 2 [14] x 2 Fix the top bracket to the wall. [03] [03] Position the chimney sections.
Page 29
[15] [15] x 2 Fit the chimney sections to the bracket. Connect top of the ducting tube to vent kit as per manufacturers instructions. [02] [02] [09] x 4 [10] x 4 [11] [11] [13] x 4 Insert the the 4x bolts, rubber washer and washer and tighten with the allen key, ensuring not to over tighten as this may cause damage to the glass.
Page 30
NOTE: Ensure walls are level and clean. [07] [07] Glass NOTE: The double sided tape supports the splash back while the silicone adhesive sets.
Page 31
WARNING: Wait 24 hours before removing the WARNING: The hob must not be used for 24 hours after the splashback has been installed. NOTE: If installing the glass splash back, then a 2mm gap needs to be left all the way around, so it can expand without pressing against anything which will cause internal stresses.
Page 32
Appendix... Information for EU66 (A)Information of the cooker Hood Symbol Value Unit AGS60PK, Model identification UBAGS60PK,UBAGSW60PK Annual Energy Consumption 116.9 kWh/a hood Time increase factor Fluid Dynamic Efficiency hood Energy Efficiency Index 105.8 hood Measured air flow rate at best 208.6...
Page 36
Apelson Appliances UK Limited Unit 3 Normandy Landings Pope St Castleford WF6 2AG...
Need help?
Do you have a question about the AGS60PK and is the answer not in the manual?
Questions and answers