Pioneer AVH-Z2200BT Operation Manual

Pioneer AVH-Z2200BT Operation Manual

Dvd rds av receiver

Advertisement

AVH-Z3200DAB
AVH-A3200DAB
AVH-Z2200BT
DVD RDS AV RECEIVER
Operation Manual

Advertisement

Table of Contents
loading

Summary of Contents for Pioneer AVH-Z2200BT

  • Page 1 AVH-Z3200DAB AVH-A3200DAB AVH-Z2200BT DVD RDS AV RECEIVER Operation Manual...
  • Page 2: Table Of Contents

    Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference.
  • Page 3 ■ Favourite menu ................. 87 ■ Other functions................. 88 ■ Appendix ................... 90 - 3 -...
  • Page 4: Precaution

    Precaution Certain country and government laws may prohibit or restrict the placement and use of this product in your vehicle. Please comply with all applicable laws and regulations regarding the use, installation and operation of this product. If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
  • Page 5 • If you notice smoke, a strange noise or odour from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorised Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.
  • Page 6 To ensure safe driving WARNING • LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE HANDBRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.
  • Page 7 • To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred. • Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.
  • Page 8 • When using a mobile phone, keep the aerial of the mobile phone away from the LCD screen to prevent disruption of the video in the form of spots, coloured stripes, etc. • To protect the LCD screen from damage, be sure to touch the touch panel keys only with your finger and do so gently.
  • Page 9: Parts And Controls

    Parts and controls Main unit RESET Press to reset the microprocessor (page 10). VOL (+/ Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode. NOTE To activate the camera view mode with this button, set [Back Camera Input] to [On] or [AV Input] to [Camera] (page 68).
  • Page 10: Basic Operation

    Basic operation Resetting the microprocessor CAUTION • Pressing the RESET button resets settings and recorded contents to the factory settings. – Do not perform this operation when a device is connected to this product. – Some of the settings and recorded contents will not be reset. •...
  • Page 11 3-way system with a high range speaker, middle range speaker and subwoofer (low range speaker) for reproduction of high, middle and low frequencies (bands). WARNING Do not use the unit in Standard Mode when a speaker system for 3-way Network Mode is connected to the unit.
  • Page 12 Operating list screens Touching an item on the list allows you to narrow down the options and proceed to the next operation. Appears when all characters are not displayed on the display area. If you touch the key, the rests are scrolled for display. NOTE This function is available only when you stop your vehicle in a safe place and apply the handbrake.
  • Page 13 Switches the dimmer duration by day or night. Switches between playback and pause. Skips files forwards or backwards. Performs fast reverse or fast forwards. Displays setting menu screen (page 67). Closes the menu bar. Top menu screen Switches the top menu screen layout. Touch and hold appears at the top of the screen.
  • Page 14 Favourite source icons If you select [Power OFF], you can turn off almost all functions. • An incoming call is received (only for hands-free phoning via Bluetooth). • A rear view camera image is input when the vehicle is in reverse. •...
  • Page 15 When you connect the external navigation system to this unit, is displayed. Touch to start the navigation system. - 15 -...
  • Page 16: Bluetooth

    Bluetooth Bluetooth connection Turn on the Bluetooth function on the device. Press Touch then The Bluetooth screen appears. Touch [Connection]. Touch The unit starts to search for available devices, then displays them in the device list. Touch the Bluetooth device name. After the device is successfully registered, a Bluetooth connection is established by the system.
  • Page 17 CAUTION Never turn this product off and disconnect the device while the Bluetooth setting operation is being processed. Menu Item Description [Connection] Connect, disconnect, or delete registered Bluetooth device manually. Touch to delete registered device. To connect a registered Bluetooth device manually, touch the name of the device.
  • Page 18 registered devices are already connected, you can connect the remaining third device to use the audio function only from the switch devices key on the audio source screen. • The icon for the mobile phone currently being used is displayed on the Phone menu screen.
  • Page 19 The following items are displayed. • Name of the current mobile phone • List number of the current mobile phone • Reception status of the current mobile phone • Battery status of the current mobile phone If you connect two mobile phones to this product at the same time, you can switch between the mobile phones using the switch devices key.
  • Page 20 Touch Touch On the [Phone Book] screen, touch the desired name to display the contact’s phone number. Touch ▶Dialling from the preset dial list Touch Touch the desired entry on the list to make a call. The dial screen appears and dialling starts. ▶Deleting a phone number Press Touch...
  • Page 21 Press Touch Touch The voice recognition function launches and the voice control screen appears. TIPS • You can also launch the voice recognition function by pressing button. • If two mobile phones are automatically connected to this product with the Bluetooth device auto connect function, the voice recognition function (Siri Eyes Free Mode) will be set on the second phone.
  • Page 22 Touch to turn private mode on or off. NOTES • If two mobile phones are connected to this product and the first phone is set to private mode, you can receive incoming calls on the second phone while maintaining the call in progress on the first phone.
  • Page 23 ▶The received call and dialled number histories • You cannot make a call to the entry of an unknown user (no phone number) in the received call history. • If calls are made by operating your mobile phone, no history data will be recorded in this product.
  • Page 24 The Bluetooth audio playback screen appears. Basic operation Bluetooth audio playback screen Track number indicator Switches between playback and pause. Skips files forwards or backwards. • By pressing then touch , you can also skip files forwards or backwards. • By pressing then touch and hold , you can also perform fast reverse or fast forwards.
  • Page 25: Av Source

    AV source Supported AV source You can play or use the following sources with this product. • Radio • Digital Radio* • CD • Disc (compressed audio or video files on discs) • DVD-Video • USB The following sources can be played back or used by connecting an auxiliary device. •...
  • Page 26 Selecting a source Source on the AV source selection screen Press then touch Touch the source icon. When you select [Source OFF], the AV source is turned off. Source on the source list Press then touch the AV operation key. Touch Touch the source key.
  • Page 27 Adjusting the range of favourite source icons area NOTE This function is available only when you stop your vehicle in a safe place and apply the handbrake. Press Touch and hold appears at the top left of the favourite source icons. Drag to the desired position.
  • Page 28: Digital Radio

    Digital Radio tuner operations For improved Digital Radio reception, make sure a Digital Radio aerial with phantom power input (active type) is used. Pioneer recommends using AN-DAB1 (sold separately) or CA-AN-DAB.001 (sold separately). Current consumption of Digital Radio aerial should be 100 mA or less.
  • Page 29 Basic operation Digital Radio screen Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key. Displays the preset channel list. Select an item on the list to switch to the preset service. Selects the DAB1, DAB2, or DAB3 band.
  • Page 30 Selects a station. Touch the desired station in the categorised list as follows. [Station]: Displays all stations. [Program Type] (PTY label): Searches from programme type information. [Station Group]: Displays the station group list. If you touch [List Update], you can update station list information manually. NOTES •...
  • Page 31 Menu Item Description [TA Interrupt]*1 Receives the traffic announcement from the last selected frequency, interrupting the other sources. [DAB+RDS TA] Receives current traffic information for DAB and RDS (AN-DAB1 has priority) if available. [RDS TA ONLY] Receives current traffic information for only RDS if available.
  • Page 32: Radio

    Radio Starting procedure Press then touch Touch [Radio]. The Radio screen appears. Basic operation Radio screen Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key. Displays the preset channel list. Select an item on the list ([1] to [6]) to switch to the preset channel. Selects the FM1, FM2, FM3 or MW/LW band.
  • Page 33 Manual tuning Seek tuning or non stop seek tuning Releasing the key in a few seconds skips to the nearest station from the current frequency. Keep holding the key for long seconds to perform non stop seek tuning. TIPS • By pressing then touch , you can also switch the preset channels.
  • Page 34 Menu Item Description [Local] Local seek tuning allows you to only tune into [Off] radio stations with sufficiently strong signals. FM: [Level1] [Level2] [Level3] [Level4] NOTES MW/LW: [Level1] [Level2] • [Level4] for FM and [Level2] for MW/LW are available only with the stations with the strongest signals. •...
  • Page 35 Gives no effect. [Music] Gives priority to the sound quality. *1 This setting is available only when the source is off. *2 This function is available only when you receive the FM band. *3 AVH-Z3200DAB/AVH-A3200DAB *4 AVH-Z2200BT - 35 -...
  • Page 36: Disc

    Disc Inserting and ejecting a disc You can play a normal music CD, Video-CD, or DVD-Video using the built-in drive of this product. CAUTION Do not insert anything other than a disc into the disc-loading slot. Inserting a disc Insert a disc into the disc-loading slot. The source changes and then playback will start.
  • Page 37 Audio source Audio source screen Track number indicator Switches between playback and pause. Skips files forwards or backwards. Sets a repeat play for the current disc/the current track. Plays or does not play tracks in random order. Selects a track from the list. Touch a track on the list to play back.
  • Page 38 Video source screen 1 Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Performs fast reverse or fast forwards. Touch again to change the playback speed. Stops playback. Performs frame-by-frame playback. Performs slow-motion playback. Each time you touch , it changes the speed in four steps in the following order: 1/16 ->...
  • Page 39 Searches for the part you want to play. Touch [Title], [Chapter], [10Key], or [Track] then input the desired number from [0] to [9]. To start playback from the number you registered, touch TIPS • To cancel an input number, touch [C]. •...
  • Page 40 Resumes playback (Bookmark). This function is available for DVD-Video. You can memorise one point as a Bookmark for a disc (up to five discs). To clear the bookmark on the disc, touch and hold this key. Returns and begins playback from the specified point. This function is available for DVD-Video and Video-CDs featuring PBC (playback control).
  • Page 41: Compressed Files

    Compressed files Inserting and ejecting media You can play compressed audio, compressed video, or still image files stored in a disc or an external storage device. CAUTION Do not insert anything other than a disc into the disc-loading slot. Inserting a disc Insert a disc into the disc-loading slot.
  • Page 42 USB cable USB storage device Unplugging a USB storage device Pull out the USB storage device from the USB cable. NOTES • Check that no data is being accessed before pulling out the USB storage device. • Turn off (ACC OFF) the ignition switch before unplugging the USB storage device. Starting procedure For Disc Insert the disc (page 41).
  • Page 43 Audio source Audio source screen 1 (Example: USB) Displays the link search screen. Touch the song to play back followed by touching the song information, after switching to Music Browse mode (page 44). If you touch the artwork, the list of songs in the album is displayed. NOTE This function is available for the USB storage device only.
  • Page 44 Switches the following media file types. [Music]: Compressed audio files [Video]: Compressed video files [CD-DA]: Audio data (CD-DA) [Photo]: Image files Selects a file from the list. Touch a file on the list to playback. Touching a folder on the list shows its contents. You can play a file on the list by touching it.
  • Page 45 NOTES • This function is available for the USB storage device only. • Music Browse mode cannot be held once the power is turned off. Touch to create a database. Music Browse mode will be available after the database has been created. Touch Touch the desired category to display the file list.
  • Page 46 Performs fast reverse or fast forwards. Touch again to change the playback speed. Stops playback. Performs frame-by-frame playback. Performs slow-motion playback. Sets a repeat play range for all files/the current folder/the current file. Switches the audio/subtitle language. NOTE Switching of the subtitle function is only available on disc. Switches the following media file types.
  • Page 47 Still image screen Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Switches between playback and pause. Skips files forwards or backwards. Selects the previous folder or the next folder. Saves the current images as the wallpaper. Touch the following items then touch [Yes] to overwrite the image.
  • Page 48 Switches the following media file types. [Music]: Compressed audio files [Video]: Compressed video files [CD-DA]: Audio data (CD-DA) [Photo]: Image files Selects a file from the list. Touch a file on the list to playback. Touching a folder on the list shows its contents. You can play a file on the list by touching it.
  • Page 49: Ipod

    iPod Connecting your iPod When connecting an iPod to this product, the settings are automatically configured according to the device to be connected. For details of the compatiblity, refer to Compatible iPod/iPhone models (page 103). NOTES • Depending on the generation or version of the iPod, some functions may not be available. •...
  • Page 50 Displays the link search screen. Select a song from the list related to the song currently playing. If you touch the artwork, the list of songs in the album is displayed. NOTE This function is not available while playing Apple Music Radio. Switches between playback and pause.
  • Page 51 Audio source screen 2 Changes the audiobook speed. Normal—Fast—Slow Displays the hidden function bar. Apple Music® Radio source Important Apple Music Radio may not be available in your country or region. For details about Apple Music Radio, visit the following site: http://www.apple.com/music/ NOTE This function is only available when using the iPod function with iOS 8 or higher (up to iOS 11) installed on iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,...
  • Page 52 Displays the pop-up menu for Apple Music Radio. • Touch [Play More Like This] to play back songs similar to the current song. • Touch [Play Less Like This] to set it not to play back the current song again. •...
  • Page 53: Weblink

    Using WebLink Important • Pioneer is not liable for any issues that may arise from incorrect or flawed app-based content. • The content and functionality of the supported applications are the responsibility of the App providers. • In WebLink, functionality through the product is limited while driving, with available functions determined by the App providers.
  • Page 54 WebLink Displays the main menu of the WebLink source screen. When the rear display is connected to this unit, video from the WebLink screen can be displayed to the rear display except while the AV source with video content is active even while driving. For iPhone users System requirement iOS 10.0 or higher (up to iOS 11.x)
  • Page 55 • The video playback capability depends on the connected Android device. Unlock your smartphone and connect it to this product via USB. Refer to the Installation Manual. Press Touch Touch [WebLink]. Touch desired icon in the tab. The WebLink app is launched. Using the audio mix function You can output the audio mixing AV source and an application for iPhone or smartphone when WebLink is used.
  • Page 56: Apple Carplay

    • Apple CarPlay allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
  • Page 57 Touch [Driving Position]. Touch the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure Connect an Apple CarPlay compatible device to this product via USB. Press Touch Touch [Apple CarPlay]. Touch Apple CarPlay icon in the tab. The application screen appears.
  • Page 58 Touch to mute. Touch again to cancel mute. Touch [+]/[-] to adjust the guidance volume. Displays the main sound volume. To adjust the main sound volume, press VOL (+/-) on the unit or touch [+]/[-]. NOTE The volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The menu reappears.
  • Page 59: Spotify

    • Certain functions of the Spotify service are not available when accessing the service through Pioneer car audio/video products. • Spotify is a music service not affiliated with Pioneer. More information is available at https://support.spotify.com/. • The Spotify application is available for most iPhone and smartphone, please visit https://support.spotify.com/ for the latest compatibility information.
  • Page 60 Touch then Touch [AV Source Settings]. Confirm that [Spotify] is turned on. Press then touch Touch [Spotify]. NOTES • For details on Bluetooth connection, see page 16. • For details on USB connection for iPhone, refer to the Installation Manual. Basic operation Playback screen 1 (Track) Switches between playback and pause.
  • Page 61 Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the right to the left. Switches among connected devices. Selects a track or station from the list. Your Music: Selects a track or station from the list of saved song information. Browse: Selects a track from the category list.
  • Page 62 Playback screen 1 (Radio mode) Switches between playback and pause. Skips tracks forwards or backwards. By pressing then touch , you can skip songs forwards. NOTE The number of tracks that are skipped varies depending on the application. Starts new radio mode. Saves or deletes the current song information to or from Your Music.
  • Page 63 Playback screen 2 (Radio mode) Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the left to the right. Gives a Thumbs Up to the playing track. Gives a Thumbs Down to the playing track and skips to the next track. NOTE The number of tracks that are skipped varies depending on the application.
  • Page 64: Aux

    You can display the video image output by the device connected to video input. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the handbrake. NOTE A Mini-jack AV cable (sold separately) is required for connection.
  • Page 65 Hides the touch panel keys. To display the keys again, touch anywhere on the screen. You can set the screen size for the video image (page 88). Switches between the video input and audio input. - 65 -...
  • Page 66: Av Input

    AV input You can display the video image output by the device connected to video or camera input. For details, refer to the Installation Manual. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the handbrake.
  • Page 67: Settings

    Settings You can adjust various settings in the main menu. Displaying the setting screen Press Touch Touch one of the following categories, then select the options. System settings (page 67) Theme settings (page 75) Audio settings (page 76) Video settings (page 83) Bluetooth settings (page 16) System settings The menu items vary according to the source.
  • Page 68 [Auto Mix] Menu Item Description [Auto Mix] Select whether to perform mixing the sound output from [On] [Off] WebLink and AV source sound automatically. [Input/Output settings] Menu Item Description [USB MTP] Select whether or not to activate USB MTP (Media Transfer [Off] [On] Protocol) connection.
  • Page 69 Touch this key to switch the display between the rear view image and 2nd camera image. CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed. • Immediately verify whether the display changes to the rear view camera image when the gearstick is moved to REVERSE (R) from another position.
  • Page 70 Menu Item Description [Parking Assist Guide Adjusting the guidelines by dragging or touching Adjust] on the screen. Touch [Default] to reset the settings. CAUTION • When adjusting the guidelines, be sure to park the vehicle in a safe place and apply the handbrake. •...
  • Page 71 [Demo Mode] Menu Item Description [Demo Mode] Setting the demo mode. [On] [Off] [System Language] Menu Item Description [System Language] Select the system language. NOTES • If the embedded language and the selected language setting are not the same, the text information may not display properly. •...
  • Page 72 Menu Item Description [Touch panel calibration] Touch [Yes]. Touch two corners of the screen along the arrows then touch the centres of the two [+] marks at the same time twice. Press The adjustment results are saved. Press once again. Proceed to 16-point adjustment.
  • Page 73 [Driving Position]* Setting the driving position. [Right] [Left] • Apple CarPlay™ (page 56) * AVH-Z3200DAB/AVH-Z2200BT [Picture Adjustment] You can adjust the picture for each source and rear view camera. CAUTION For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable these functions, you must stop in a safe place and apply the handbrake.
  • Page 74 Menu Item Description [Colour]* Adjust the colour saturation. [-24] to [+24] [Hue]* Adjust the tone of colour (which colour is emphasised, red, [-24] to [+24] or green). [Dimmer] Adjust the brightness of the display. [+1] to [+48] [Temperature] Adjust the colour temperature, resulting in a better white [-3] to [+3] balance.
  • Page 75: Theme Settings

    Menu Item Description [Firmware Update] CAUTION • The USB storage device for updating must contain only the correct update file. • Never turn this product off, disconnect the USB storage device while the firmware is being updated. • You can only update the firmware when the vehicle is stopped and the handbrake is engaged.
  • Page 76: Audio Settings

    Menu Item Description (custom)*1 Displays the background display image imported from the external storage device. (off ) Hides the background display. [Illumination]*2 Select an illumination colour from the colour list or create a defined colour. Coloured Keys Select the desired preset colour. (custom) Displays the screen to customise the illumination colour.
  • Page 77 Menu Item Description [Graphic EQ] Select or customise the equaliser curve. [Super Bass (S.Bass)] Select a curve that you want to use as the basis of [Powerful] [Natural] customising then touch the frequency that you want to [Vocal] [Flat] [Custom1] adjust.
  • Page 78 Menu Item Description [Source Level Adjuster] Adjust the volume level of each source to prevent radical [-4] to [+4] changes in volume when switching between sources other than FM. Touch to adjust the source volume after comparing the FM tuner volume level with the level of the source.
  • Page 79 Menu Item Description [Time Alignment] Select or customise the time alignment settings to reflect [On] [Off] the distance between the listener’s position and each Listening Position*1*2 speaker. You need to measure the distance between the [Off] [Front Left] [Front head of the listener and each speaker unit. Right] [Front] [All] Touch to select the listening position then...
  • Page 80 Menu Item Description [Automatic Level Control] Corrects automatically the audio level difference between the music files or the sources. [Off] Turns the auto level control setting off. [Mode1] Corrects a little the audio level difference between the music files or the sources (for the narrow dynamic range audio signal).
  • Page 81 ▶Before operating the Auto EQ function • Perform Auto EQ in a quiet place with the vehicle engine and air conditioning switched off. Also, cut the power of car phones or mobile phones in the vehicle, or remove them in advance. Surrounding sounds may prevent correct measurement of the vehicle’s acoustics.
  • Page 82 Disconnect the iPhone or smartphone device. Turn on the ignition switch (ACC ON). If the vehicle’s air conditioner or heater is turned on, turn it off. Switch the AV source to [Source OFF] (page 26). Press Touch then Touch [A-EQ&TA Measurement]. Connect the microphone for acoustical measurement (sold separately) with this product.
  • Page 83: Video Settings

    NOTE [Subwoofer Settings] is available only when [Subwoofer] is [On]. Press Touch then Touch [Crossover] or [Subwoofer Settings]. Touch to switch the speaker. Drag the graph line to set the cutoff position. Drag the lowest point of the graph to set the cutoff slope. The following items can also be set.
  • Page 84 Menu Item Description [TV Aspect] Set the aspect ratio suitable for your rear display 16:9 (wide screen display) or 4:3 (regular display). (We recommend use of this function only when you want to fit the aspect ratio to the rear display.) NOTES •...
  • Page 85 Menu Item Description [Parental] Set restrictions so that children cannot watch violent or adult-oriented scenes. You can set the parental lock level in steps as desired. Touch [0] to [9] to input a four-digit code number. Touch Registers the code number, and you can now set the level.
  • Page 86 [Video Signal Setting] Menu Item Description [AV] Select the suitable video signal setting when you connect [Auto] [PAL] [NTSC] [PAL- this product to an AV equipment. M] [PAL-N] [SECAM] [AUX] Select the suitable video signal setting when you connect [Auto] [PAL] [NTSC] [PAL- this product to an AUX equipment.
  • Page 87 Favourite menu Registering your favourite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the [Favourites] screen. NOTE Up to 12 menu items can be registered in the favourite menu. Creating a shortcut Press then touch...
  • Page 88 Other functions Setting the time and date Touch the current time on the screen. Touch to set the correct time and date. You can operate the following items: Year, month, date, hour, minute. TIPS • You can change the time display format to [12hour] or [24hour]. •...
  • Page 89 [Trimming] An image is displayed across the entire screen with the horizontal-to-vertical ratio left as is. If the screen ratio differs from the image, the image may be displayed partly cut off either at the top/bottom or sides. NOTE [Trimming] is for image files only. TIPS •...
  • Page 90 – Park your vehicle in a safe place and here, contact your dealer or the nearest apply the handbrake. authorised Pioneer service facility. No video output from the connected Common problems equipment. → The [AV Input] or [AUX Input] setting is incorrect.
  • Page 91 – The operation is not possible. (For The picture is extremely unclear/ example, the DVD playing does not distorted and dark during playback. feature that angle, audio system, → The disc features a signal to prohibit subtitle language, etc.) copying. (Some discs may have this.) –...
  • Page 92 If the error persists, screen operation. record the error message and contact your – Stop the vehicle in a safe place and dealer or your nearest Pioneer service check the screen on the smartphone. centre. The screen is displayed, but operation Common does not work at all.
  • Page 93 – Please log in to the Spotify DAB tuner application. No Signal Antenna Error → The connected device is out of area. → The aerial connection is incorrect or an – Connect the device to a network. unusual voltage has been detected. –...
  • Page 94 – The protected files are skipped. TEMP → The temperature of this product is Protect outside the normal operating range. → All the files on the connected USB – Wait until this product returns to a storage device are embedded with temperature within the normal DRM.
  • Page 95 Pioneer Service Station. – Disconnect the USB storage device and do not use it. Turn the ignition Apple CarPlay switch to OFF, then to ACC or ON and...
  • Page 96 the warnings of the discs. Depending on Playable discs the discs, inserting and ejecting may not be possible. Using such discs may result in damage to this equipment. • Do not attach labels, write on or apply DVD-Video chemicals to the surface of the discs. •...
  • Page 97 • Frequent loading and ejecting of a DVD-Video discs DualDisc may result in scratches to the • DVD-Video discs that have incompatible disc. region numbers cannot be played on this • Serious scratches can lead to playback DVD drive. The region number of the problems on this product.
  • Page 98 Common notes about the USB storage The sequence of audio files on USB storage device. device For USB storage device, the sequence is • Do not leave the USB storage device in different from that of USB storage device. any location with high temperatures. •...
  • Page 99 • Up to 64 characters can be used for the • This product is not compatible with the name of the subtitle file, including the following: MP3i (MP3 interactive), mp3 extension. If more than 64 characters are PRO, m3u playlist used for the file name, the subtitle file SAMPLING FREQUENCY USB:...
  • Page 100 • This product is not compatible with SAMPLING FREQUENCY USB: packet write data transfer. 8 kHz to 48 kHz • This product can recognise up to 32 Disc: 8 kHz to 44.1 characters, beginning with the first character, including extension for the file and folder name.
  • Page 101 Maximum frame rate 30 fps registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER .mov CORPORATION is under license. Other trademarks and trade names are those of their Compatible video codec MPEG4, H.264,...
  • Page 102 (including .avi, .divx). When you see the DivX logo, you know you have the freedom to play your favorite videos. • Pioneer accepts no responsibility for data DivX®, DivX Certified® and associated logos are lost from an iPod, even if that data is lost trademarks of DivX, LLC and are used under while using this product.
  • Page 103 exposure to direct sunlight can result in iTunes iPod malfunction due to the resulting high temperature. iTunes is a trademark of Apple Inc., • Do not leave the iPod in any location with registered in the U.S. and other high temperatures. countries.
  • Page 104 Using app-based connected Content application(s) or connected content service by its provider. • Pioneer is not liable for any issues that may arise from incorrect or flawed app- Important based content. Requirements to access app-based •...
  • Page 105 Notice regarding video Using the LCD screen viewing correctly Remember that use of this system for commercial or public viewing purposes Handling the LCD screen may constitute an infringement on the author’s rights as protected by the • When the LCD screen is subjected to Copyright Law.
  • Page 106 • 50 W × 4 visible. In that case, please consult your • 50 W × 2 ch/4 Ω + 70 W × 1 ch/2 Ω (for dealer or the nearest authorised Pioneer subwoofer) Service Station. Continuous power output: 22 W ×...
  • Page 107 Load impedance: Frequency: 4 Ω (4 Ω to 8 Ω [2 Ω for 1 ch] allowable) 25 Hz/31.5 Hz/40 Hz/50 Hz/63 Hz/80 Preout output level (max): 4.0 V Hz/100 Hz/125 Hz/160 Hz/200 Hz/250 Equaliser (13-Band Graphic Equaliser): Frequency: Slope: 50 Hz/80 Hz/125 Hz/200 Hz/315 Hz/ -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 500 Hz/800 Hz/1.25 kHz/2 kHz/3.15 dB/oct, OFF...
  • Page 108 Frequency response: WAV signal format (MSC Mode only): 5 Hz to 22 000 Hz (with DVD, at sampling Linear PCM frequency 48 kHz) Sampling frequency: Signal-to-noise ratio: Linear PCM: 91 dB (1 kHz) (IHF-A network) (RCA level) 16 kHz/22.05 kHz/24 kHz/32 kHz/44.1 Output level: kHz/48 kHz Video:...
  • Page 109 FM tuner Frequency range: 87.5 MHz to 108 MHz Usable sensitivity: 12 dBf (1.1 μV/75 Ω, mono, S/N: 30 dB) Signal-to-noise ratio: 72 dB (IEC-A network) MW tuner Frequency range: 531 kHz to 1 602 kHz (9 kHz) Usable sensitivity: 28 μV (S/N: 20 dB) Signal-to-noise ratio: 62 dB (IEC-A network)
  • Page 110 © 2019 PIONEER CORPORATION. All rights reserved. <OPM_AVHZ3200DABEU5_engb_A> EU...

This manual is also suitable for:

Avh-a3200dabAvh-z3200dab

Table of Contents