Samsung PN43D440A5D Quick Setup Manual page 2

Step 6
: Remote Control
Remote Control Buttons and Functions
Turns the TV on and off.
Press to directly access channels.
Press to select additional channels (digital) being
broadcasted by the same station. For example, to select
channel "54-3", press "54", then press "-" and "3".
Adjusts the volume.
Brings up the OSD.
Displays Media Play (USB).
Quickly select frequently used functions.
Returns to the previous menu.
Buttons used in the Channel list, Media Play (USB)
menu, etc.
• Caution
The glass screen of your PDP TV can break if you accidently drop the TV. Handle the TV with care.
When moving the TV, always have two or more people pick it up and carry it as a safety precaution. Do not lay the TV flat on its face or back.
(Your) Samsung Plasma TV is a high quality television that has been carefully packaged to protect the integrity of its glass panel and component parts during shipment.
It is, nonetheless, a fragile piece of electronics that requires careful handling. Refrain from putting undue stress on any part of the packaging when shipping or unpacking
the TV. Use care when installing the TV. Avoid placing the TV in a location where it may be struck, exposed to sharp impacts, or fall. Panel breakage caused by a fall or
impact strike is not covered under the manufacturer's warranty.
• The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using the cloth provided or a soft
cloth to prevent scratches.
Displays and selects the available video sources.
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays the channel list on the screen.
MEDIA.P SLEEP
Displays Favorite Channel Lists on the screen.
Displays information on the TV screen.
Selects the on-screen menu items and changes the values
seen on the menu.
Exits the menu.
A B C D
MTS: Press to choose stereo, mono or Separate Audio
P.SIZE
Program (SAP broadcast).
P.SIZE: Selects the picture size.
CC: Controls the caption decoder.
Changing Channels and Adjusting the Volume
Adjust the volume by pressing the Volume button
on the remote.
✎
You can also change the channels by pressing the z button on the front panel of your TV and adjust the volume by pressing the y button.
Selecting a Source
To watch a movie on your Blu-ray player or watch
your favorite TV show, you must select the correct
A
source. A source is a device, such as a Blu-ray/DVD
player, a cable/satellite box, antenna or a cable TV
S.MODE
input. Sources can be connected to your TV through
P.MODE
the HDMI, DVI, Component, Composite, or D-sub
connections, or through the Antenna or Cable In connections.
To view the signal from a source connected to the HDMI, DVI, Component,
Composite, or D-sub jack, press the SOURCE button on your remote. Each time
you press the SOURCE button, you change to a different source.
Viewing the On Screen Menus
To view the On Screen Menus, follow these steps:
1. With the power on, press the MENU button on
your remote. The main menu appears.
The menu's left side has the following menu
options: Picture, Sound, Channel, Setup, Input, Application and Support.
2. Press the ▲ or ▼ button on your remote to select a menu option, and then
press the ENTERE button.
3. When done using the menu, press the EXIT button on your remote to exit.
A
A
S.MODE
Changing the Screen Size
S.MODE
P.MODE
Your TV has several screen size options, each designed to work best with specific P.MODE
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the button on your remote. The first time
P.SIZE
you press it, your TV displays the current setting. Thereafter, each time you press
the P.SIZE button, you change the size of the picture on the screen.
The following sizes are available:
16:9 Wide screen 4:3 Standard screen Wide Fit
Zoom 1 Zoom 2 Screen Fit
✎
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
Change the channels by pressing the Channel button on the remote.
✎
If your TV is attached to a cable or satellite box, change the channel using
the box's remote.
Changing the Picture Mode
Your TV has three preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under specific conditions.
B C D
To change the Picture mode, press the P.MODE
time you press it, your TV displays the current setting. Thereafter, each time you
SLEEP
press the P.MODE button, you change the mode of the picture on the screen.
P.SIZE
The Picture Modes are listed and described in the table below:
Mode Description
Dynamic Brightens picture. For a vibrant, enhanced image in brightly lit or
sunny room.
Standard For a bright, detailed picture in a normally lit room.
For a studio quality cinema picture in a dimly lit or dark room.
Movie
To change the Picture Mode, follow these steps:
1. With the TV on, Press the MENU button on your remote, then select Picture.
2. Select Mode, then Press the ENTERE button.
3. On the Mode menu in Picture, use the ▼ or ▲ on your remote to select the
picture mode you want.
4. Press the ENTERE button to finish the change.
B C D
B C D
SLEEP
Setting the Clock
SLEEP
P.SIZE
Before you can use your TV's On/Off Timer, you must set the clock. To set the
P.SIZE
clock, follow these steps:
button on your remote, then select Setup →
1. Turn on your TV, press the MENU
Time.
2. Select Clock Mode, and then press the ENTERE button.
3. Choose Auto or Manual.
x
If you select Auto, the current time will be set automatically using the time
from a digital channel.
x
If you select Manual, you can set the Month, Day, Year, Hour, Minute
and am/pm directly by pressing up, down, left and right arrow button on
your remote.
4. Press the RETURN button on your remote when done.
Connecting a USB Device for Media Play
You can enjoy photo and music
files stored on a USB device
by connecting it to the TV and
using the Media Play feature.
To connect a USB device
for Media Play, follow these
steps:
Photo
1. Turn on your TV.
2. Connect a USB device
containing photo and/or music files to the
3. When the Input selection screen is displayed, press the  button to select
Media Play (USB), then press the ENTERE button.
button on your remote. The first
Photo
SUM
307.2MB/973.7MB Free
Music Setup
L Move E Enter R Return
USB jack on the side of the TV.