Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure. Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use.
Page 4
Please read this user manual first! Dear Customer, We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure. Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use.
CONTENTS 1. Dishwasher Auxiliary functions InnerClean Technical specifications Programming the washing time 2. Important safety instructions 5 Starting the programme General safety Child (Key) Lock Intended use Cancelling the programme Children’s safety Salt indicator ( Rinse Aid indicator ( 3. Installation End of programme Appropriate installation location Water cut-off warning...
Technical specifications This product complies with the following EU directives: Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2006/95/EC, 2004/108/EC, 93/68/EEC, IEC 60436, EN 50242 Power input 220-240 V, 50 Hz Total power consumption 1800-2100 W Heater power...
Important safety instructions This section contains safety draining hoses must be instructions that will help to securely fastened and get protected from risk of remain undamaged. personal injury or property Unplug the product when • damage Failure to follow not in use. these instructions shall void Never wash the product •...
baskets. Do not put This product should • other loads on the door; not be used by persons otherwise, the product with physical, sensory may tilt. or mental disorders Never leave the door or unlearned or • of the product open inexperienced people apart from loading and (including children)
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your location product. To make the product ready · Place the product on a solid and for use, make sure that the electricity, flat floor that has sufficient load tap water supply and water drainage carrying capacity! The product systems are appropriate before...
Connection to the drain sludge accumulation at the end of washing. Water discharge hose can directly be connected to the drain hole or Permitted water temperature: up sink’s drainage. The length of this to 25°C connection must be min. 50 cm and The dishwasher may not be max.
Adjusting the feet • Connection must comply with national regulations. If the door of the product cannot • Power cable plug must be within be closed properly or if the product easy reach after installation. swings when you push it slightly, Unplug the product after the then you need to adjust the feet washing programme is over.
Disposing of packaging and other wastes at the end of its service life. Take it to the collection material center for the recycling of electrical Packaging materials are dangerous to and electronic equipment. Please children. Keep packaging materials in consult your local authorities to learn a safe place away from reach of the about these collection centers.
Prewashing Tips for energy saving Following information will help you use the product in an ecological and energy-efficient manner. • Wipe away any coarse food remnants on the dishes before putting them in the product. • Operate the product after filling it completely.
Adding salt Water softening system needs to be regenerated in order for the product operates with the same performance continuously. Dishwasher salt is used for this purpose. Use in your product only the special softening salts produced particularly for use in dishwashers.
5. If you will not start a washing 1. Push the latch to right to open the programme immediately after detergent dispenser lid (A). adding the salt, run the machine empty in the shortest programme to dissolve and wash away the scattered salt in the machine.
“click” will be heard when the lid is Information about suitable closed. places (detergent dispenser, basket etc.) in the dishwasher In programmes with prewash and to place the tablet can be found at high temperature, in which you amongst the usage instructions use tablet detergents, make sure on the packages of the tablet that the detergent dispenser lid is...
Rinse aid 4. Turn the rinse aid amount adjuster manually to a position The rinse aid used in dishwashers between 1 and 6 (4). If there are is a special combination used to stains on tableware items after increase drying efficiency and washing, level must be increased prevent water or limescale stains and if there is a blue trace after...
Page 19
as well. Some delicate glass types and crystals may become dull in time. We strongly recommend you to check if the tableware you are going to purchase is suitable for washing especially in the dishwasher. Placing the dishes into the dishwasher You can use your dishwasher in the optimum way with respect to energy...
Page 20
Suggestions for loading the Improper Loading Of Dishware dishwasher Lower basket Upper basket 17 EN...
Silverware basket Collapsable lower basket wires (2 pieces) (depends on the model) Silverware basket is designed to wash (depends on the model) your dishes such as fork, spoon and The two piece foldable wires located etc. in a cleaner manner. at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls,...
Collapsable lower basket wires (2 & 4 pieces) (depends on the model) The foldable wires (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each wire individually or all them at once.
Adjusting the height of loaded upper basket (depends on the model) Basket adjustment mechanism on the upper basket of the machine is designed to allow you create wider areas in the upper or lover section of the machine based on your requirements by adjusting the height of the loaded basket in up or down directions without removing it from...
Adjusting the height of loaded upper basket (depends on the model) Basket adjustment mechanism on the upper basket of the machine is designed to allow you create wider areas in the upper or lover section of the machine based on your requirements by adjusting the height of the loaded basket in up or down directions without removing it from...
Adjusting the height of empty upper basket (depends on the model) You can adjust the height of the upper basket according to the size of the dish to be washed. Use basket rollers to change the basket height. 1. Turn the stoppers on the ends of the upper basket rails by turning them aside (A).
Operating the product 1. Display Half Load Function 2. On/Off key Super Rinse Function 3. Start/Pause/Cancel key (Not in use) 4. Time Delay key Extra Dryingfunction 5. Function keys 6. Program Selection keys 7. Programme indicator 13. Screen information line 8.
Keys 3. Press Programme Selection keys until the number of the On / Off key programme you selected appears It is used to turn on or off the on the Programme indicator. machine. Use P+ to switch to the next Machine will turn on with economy programme, and P- to switch to programme in On mode and the...
Auxiliary functions 2. Turn the machine on with On/Off key. Washing programmes of your dishwasher are designed to obtain 3. Select the desired programme and the best cleaning effect, considering press the Half Load key. The Half the type of the soil, soiling degree Load indicator will light on the and properties of the dishes to be display in the Function Selected...
InnerClean 2. Press P+ key to activate the a: option. Automatic detergent This programme is recommended detection feature is disabled at to be operated on each 1-2 months “a:0” option and enabled at "a:1" for machine cleaning and necessary option. Set the desired option by hygiene.
Start / Pause indicator will light Your machine performs water continuously until the end of the softening depending on the period. Time Delay is displayed hardness level of the supply water. on the Display Information Line. Remaining time displayed towards Selected programme will start as the end in some programmes soon as the countdown is over.
activated. to refill the salt reservoir with salt whenever salt warning indicator Child Lock prevents the selected appears on the display of your programme or functions from machine. being changed and disables the Adjusting the water hardness Start / Pause / Cancel key. level is explained in Water Child Lock does not lock the door Softening System section.
washing programme is paused and the water inlet is checked regularly by the machine; when the water is restored E:02 icon will disappear after a while and the washing programme resumes. Overflowing warning If the machine intakes too much water or there is leakage at any of the components then the machine will detect this and E:01 icon will flash on the Programme indicator.
Maintenance and cleaning Service life of the product extends left on the filters. If there are food and frequently faced problems residues on filters, take them out and decrease if it is cleaned at regular clean well under running water. intervals.
3. Press the two pawls on the coarse 4. Install the hose to tap. filter inwards and separate the (depends on the model) coarse filter from the assembly (C). Cleaning the impellers Clean the impellers at least once a week in order for the machine operates efficiently.
Page 36
Upper impeller Check if the holes on the upper impeller (2) are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to remove the upper impeller (C, D). Make sure that the nut is tightened well when installing the upper impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 38
• Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser lid is closed tightly after adding detergent. Dishes are not dry at the end of cycle • Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no water will accumulate in them.
Page 39
Lime traces remain on dishes and glassware gains a misty appearance • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine.
Page 40
the protective cover on the surface and causing discoloration. • Intensive cleansers such as bleaches are used. >>> Protective cover on metal surfaces gets damaged and looses its efficiency in time when it gets in contact with cleansers such as bleach. Do not wash your dishes with bleach.
Page 41
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while adding salt. Spilled salt can cause scratches. Make sure that the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash programme to remove the salt that spilled inside the machine.
Page 42
Kitchen utensils are broken. • Dishes are not placed orderly in the machine. >>> Load the dishes as described in the user manual. • Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity. Water remains in the dishwasher at the end of the programme. •...