Table of Contents
Advertisement
Installation of a panel antenna as an outdoor antenna
Installation of Yagi wide band antenna as an outdoor antenna
Installation of a Yaggi antenna as an outdoor antenna
Cable layout and connector assembly
1. Keep the type, specifications, routing direction, location and curvature radius of cables in compliance with
the model requirements. Place cables in correct order, bend them smoothly, and protect the surface from any
damage.
2. Place RF cables separately from power cables. Take proper isolation measures if they have to be placed on
the same cable racks owing to the site condition restrictions.
3. Fasten all connection parts of the whole system in correct order, from the antenna to repeater interfaces, and
make sure that the electrical interfaces are well contacted. Give waterproof treatment to outdoor connection
parts.
4. Take lightning protection measures for the antenna and feeder system in accordance with the system
requirements. Avoid deforming the antenna feeder where grounding clips are placed, and give waterproof
treatment to the feeder.
Indoor antenna installation
Correct antennas types shall be used according to the site conditions and the requirement.
Advertisement
Table of Contents
