Led Indicators; Specifications - Moxa Technologies TCF-142-M-SC-RM Quick Installation Manual

LED Indicators

There are three LEDs on the front bracket of the TCF-142-RM slide-in
modules.
LED
PWR
Fiber Tx
Fiber Rx

Specifications

Serial Communication
Signals for RS-232
Signals for RS-422
Signals for 4-wire RS-485
Signals for 2-wire RS-485
Baudrate
ESD protection
Fiber Communication
Connector type
Distance
Support Cable
Single mode:
Multimode:
Wavelength
TX Output
RX Sensitivity
Point-to-Point Transmission
Multi-drop Transmission
Environmental
Operating Temperature
Storage Temperature
Power
Input Power Voltage
Power Consumption
Mechanical
Dimensions (W × D × H)
Material
Gross Weight
Regulatory Approvals
CE
FCC
EMS
Color Function
Green Steady ON: Power is ON
Green When sending serial data from the fiber port
Yellow When receiving data from the fiber port
TxD, RxD, SGND
TxD+, TxD-, RxD+, RxD-, SGND
TxD+, TxD-, RxD+, RxD-, SGND
Data+, Data-, SGND
50 bps to 921.6 Kbps
15 KV ESD
ST or SC
Single mode fiber for 40 km
Multi-mode fiber for 5 km
8.3/125, 8.7/125, 9/125 or 10/125 μm
50/125, 62.5/125, or 100/140 μm
Single mode: 1310 nm
Multimode: 850 nm
Single mode: > -5 dBm
Multimode: > -5 dBm
Single mode: -25 dBm
Multimode: -20 dBm
Half or Full duplex
Half duplex, fiber ring
0 to 60°C (32 to 142°F), 5 to 95 % RH
-20 to 75°C (-4 to 185°F), 5 to 95 % RH
12 VDC
150 mA @ 12V
86.8 × 136.46 × 21 mm
SPCC
80 g
Class A
Part 15 sub part B Class A
EN 61000-4-2 (ESD): Contact: 4 kV;
Air: 8 kV
EN 61000-4-3 (RS): 80 MHz to 1 GHz:
3 V/m
EN 61000-4-4 (EFT): Power: 1 kV;
EN 61000-4-5 (Surge): Power: 2 kV (AC
Power); Power: 1 kV (DC Power).
EN 61000-4-6 (CS): 150 kHz to 80 MHz:
- 8 -