¦ ¦
Installing¦the¦Stand
Preset
Front
Back
✎
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to models
(Depending on the model)
Step¦1.¦ Connect the Guide Stand to the Stand using five screws M4 X L12 as shown.
✎
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
✎
Make sure that at least two persons lift and move the PDP TV.
✎
Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
Step¦2.¦Fasten two screws M4 X L12 at position 1, and then fasten two screws M4 X L12 at position 2.
✎
Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
¦ ¦
Using¦the¦remote¦control¦buttons
ENTERE / DIRECTION Buttons
Move the cursor and select an
item. Select the currently selected
item. Confirm the setting.
RETURN
Button
Return to the previous menu.
¦ ¦
Installing¦Batteries¦in¦the¦Remote¦Control
Step¦1
POWER
SOURCE
TTX/MIX
MUTE
CH LIST
MENU
CONTENT
TOOLS
1
RETURN
2
A
B
@ T V
MEDIA.P
INTERNET
AD
P.SIZE
English - 2
ON/OFF
PRE-CH
MENU
GUIDE
3
Display the main on-screen menu.
INFO
EXIT
EXIT
4
Exit the on-screen menu.
C
D
f-g
DUAL
✎
NOTE
SUBT.
x
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the
remote control. Avoid using nearby special
fluorescent light or neon signs.
x
The colour and shape may vary depending on the
model.
Step¦2
2
1
Button