Troubleshooting - Enter-Tech ET28KH Quick Manual

TROUBLESHOOTING

PRECAUTION
Use the adaptor that comes with ONSTAGE only. There are many adaptors that are plug-compatible with
ONSTAGE, but have different electrical specifications. These adaptors would work only for a short period of time
but would soon damage ONSTAGE.
Do not plug ONSTAGE in if it is wet. Please contact the service center immediately, if the device has been used in wet
condition.If any solid object or liquid gets inside of ONSTAGE, unplug it and have it checked by the service center.
Do not drop ONSTAGE. Any external or internal
damage due to dropping is not covered under warranty.
Do not store ONSTAGE in direct sunlight, in a high
temperature, or a highly humid room.
Do not prsss the LED/LCD part
Do not immerse ONSTAGE in water or splash water
on it. Water damage is not covered by the warranty.
TROUBLESHOOTING
In cases of problems, please check the following recommendations before contacting the service center.
● If ONSTAGE cannot be turned on
● If the user's voice cannot be heard
● If the TV does not show pictures
or emit sound
● The display screen of ONSTAGE
has frozen or disappeared from
TV screen
※ When ONSTAGE needs to be repaired, please send it to your nearest service center or the place you purchased it from.
ENTER TECH CO., LTD.
Address
: Enter B/D, 156-7, Ojeong-dong, Ojeong-gu,
Bucheon-City, Kyonggi-do, Korea (421-814)
Tel
: +82-32-680-9000 |
Web address
: www.enter-tech.com
MAIN DEVICE : Make sure the adaptor is correctly plugged into the power outlet.
Check if the plug is properly inserted to the corresponding jack.
In case you are using the device with wireless MIC, check if the battery type is AA.
If the battery is low, ONSTAGE wireless MIC may not work properly.
Press the VOL button and check the MIC volume of ONSTAGE.
Press "0" button on the wireless MIC, and then press "POWER" button using
another finger to turn on the power.(Do not release button "0" and "POWER"
until the word "SEL" appears on the LCD of MIC.)
Make sure HD cable and/or A.V cables are properly connected between
ONSTAGE and HDTV(SDTV). And check if the input setting of HDTV(SDTV)
corresponds to the external input of your TV to which the cables are connected.
Press the power button off and turn it back on.
VER.100
Fax
: +82-32-673-0818
Do not insert or remove additional packs, total pack and
USB memory device while ONSTAGE is turned on.
Do not use strong chemicals to clean ONSTAGE, as
these chemicals may damage the device. Keep
ONSTAGE away from pets and small children.
Never use a sharp object on the keypad.
Do not disassemble ONSTAGE into parts.
This will void the warranty.
PRODUCT NAME : ONSTAGE
MODEL NUMBER : ET28KH / FCC : PBN-ET28KH
This device complies with part 15 of the FCC Rules.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions :
Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,including interference
(2) This device must accept any interference received, including that may cause undesired operation.
interference that may cause undesired operation.
Any changes or modifications to the equipment not expressly approved by the
responsible for compliance could void user's authority to operate the equipment.
Any changes or modifications to the equipment not expressly
approved by the responsible for compliance could void user's
authority to operate the equipment.
ET28KH QUICK GUIDE | 06