Table of Contents
Advertisement
Frequently Asked Questions
Most problems that occur during daily use can be easily corrected. With the help
of the following guide, you will be able to find the causes of problems and rectify
them. However, please note:
Important! Never open the casing of the appliance.
Repairs and other work by unqualified persons could be dangerous. The manu-
facturer cannot be held responsible for unauthorized work.
Repairs to electrical appliances should only be carried out by a suitably quali-
fied person in accordance with local and national safety regulations.
If you cannot remedy the problem yourself, please contact Miele.
Messages in the display
Fault messages must be confirmed with OK, otherwise the message can reap-
pear in the display even though the problem has been remedied.
To address the fault, follow the instructions on the display.
If the fault message appears in the display again, contact Miele.
Message
F1, F2,
F80, F82
F41, F42, F74, F77, F235,
F236
F10, F17
66
Possible cause and solution
There is an internal fault.
Switch the coffee machine off with the On/Off but-
ton . Wait for approx. one hour before switching
it back on again.
There is an internal fault.
Turn the appliance off with the On / Off button .
Wait for 2 minutes before turning it back on again.
No water or very little water is being drawn in.
Remove the water container, fill it with fresh tap
water and replace it.
Check the stainless steel water intake valve filter
and clean if necessary (see "Stainless steel water
intake valve filter").
Advertisement
Table of Contents
