Related Manuals for Sony Trinitron Wega KV-SW21 Series
Summary of Contents for Sony Trinitron Wega KV-SW21 Series
- Page 1 2-652-924-11 (1) Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. KV-SW21 KV-BZ21 © 2005 Sony Corporation...
- Page 2 Specifications Note KV-BZ21M80 KV-SW21M83 KV-SW21M80 Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G, I, D/K, M Color system PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43 Channel coverage VHF : E2 to E12 /UHF : E21 to E69 / CATV : S01 to S03, S1 to S41 UHF : B21 to B68 /CATV : S01 to S03, S1 to S41 VHF : C1 to C12, R1 to R12 /...
- Page 3 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
-
Page 4: D Getting Started
Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. Use only the supplied screws. Use of other screws may damage the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and (1) Put a cord or chain through the to the provided hole at the rear of... - Page 5 Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language, preset the TV channels automatically and sort or edit the channels using the buttons on the remote control or TV top control panel.
- Page 6 Setting up your TV (“Initial Setup”) (continued) d) If you wish to edit the channels, press to change to edit mode. Press b until the mode that you wish to edit Program Sorting/Edit is highlighted: Label, Skip, (block symbol). PROG Label Skip Then press...
-
Page 7: Tv Top Control, Front And Rear Panels
TV top control, front and rear panels TV top control panel WEGA GATE PROG SOUND MODE TV rear panel (MONO) TV front panel (MONO) (MONO) (MONO) Button/Terminal Function Turn off or turn on the TV. Remote control sensor. Wake Up indicator. Standby indicator. - Page 8 Connecting the 3D WOOFER KV-SW21M83 only You can enjoy high quality sound by connecting the 3D WOOFER as follows: Step 1 3D WOOFER Step 2 Black Red wire wire Notes • Connect only the supplied 3D WOOFER; otherwise your TV may malfunction. •...
- Page 9 Connecting optional components Connecting to the video input terminal ( t ) Audio/Video cable (not supplied) TV front panel Camcorder (MONO) TV rear panel Antenna cable (not supplied) (MONO) (MONO) Audio/Video cable (not supplied) DVD Player Note • If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the program number 0 on the TV (see O).
- Page 10 Connecting optional components (continued) Connecting to the component video input terminal ( TV rear panel Component video cable (not supplied) (MONO) (MONO) DVD player Audio cable (not supplied) Notes • If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to (component video input) on your TV.
-
Page 11: Troubleshooting
• Check the antenna cable and connection on the TV, VCR and at the wall (see H). noisy sound • Check the antenna setup. Contact a Sony dealer for advice. • Display the “Channel Setup” menu and select “Manual Program” to preset the channel again (see O). - Page 12 TV for about 15 minutes, then turn it on again to demagnetize the TV. • Count the number of times the 1 (standby) indicator flashes. The 1 (standby) Press ! (main power) to turn off your TV. Contact your nearest Sony indicator on your TV flashes red service center.
- Page 13 Using the remote control and basic functions Button Description 1 ?/1 Turn off temporarily or turn on – the TV. Display the TV program. – Jump to last program number – that has been watched for at least five seconds. PROG +/–...
- Page 14 Using the remote control and basic functions (continued) Button Description WEGA GATE menu operations Confirm selected items. WEGA GATE Display or cancel WEGA GATE menu. V, v, B, b Select and adjust items. RETURN Return to the previous level. Timer operations Set TV to turn on automatically according to the –...
-
Page 15: Introducing The Wega Gate Navigator
Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs and “Settings” menu. WEGA GATE External Inputs “TV” watch the preset TV Settings channels (see E) Select Confirm Select Confirm External Inputs Video 1... -
Page 16: "Settings" Adjustment
“Settings” Adjustment You are able to change the settings of your TV from “Settings” in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select “Settings” and press The following is an overview of the items that can be adjusted. “Picture”... -
Page 17: Changing The "Picture" Setting
Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press WEGA GATE and select “Settings”. Make sure the “Picture” icon ( ) is selected, then press Press V or v to select the desired item (e.g., “Picture Mode”), then press Select “Picture Mode”... - Page 18 Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press WEGA GATE and select “Settings”. Press V or v to select the “Sound” icon ( ), then press Press V or v to select the desired item (e.g., “Sound Mode”), then press Select “Sound Mode”...
-
Page 19: Changing The "Channel Setup" Setting
Changing the “Channel Setup” setting The “Channel Setup” menu allows you to preset channels automatically, manually preset channels and sort or edit the channels. Press WEGA GATE and select “Settings”. Press V or v to select the “Channel Setup” icon ( ), then press Press V or v to select the desired item (e.g., “Auto Program”), then press Select... - Page 20 Changing the “Channel Setup” setting (continued) Presetting channels manually After selecting “Manual Program”, select the program number to which you want to preset a channel. (1) Make sure “Program” is selected, then press (2) Press V or v until the program number you want to preset appears on the menu, then press Select the desired channel.
- Page 21 Changing the “Setup” setting The “Setup” menu allows you to change the menu language, label the connected equipment, select the color system, set the wake up timer beep and reset your TV to factory settings. Press WEGA GATE and select “Settings”. Press V or v to select the “Setup”...