Nantucket Breeze NB12CR Owner's Manual page 7

AIR CONDITIONER FEATURES(CONTINUED)
TO CHANGE TEMPERATURE
SETTING:
Temp Temp
Timer
Timer
On
Off
Check
Sleep
Filter
Timer
Auto
Auto
TO ADJUST FAN SPEEDS:
Auto
Auto
Low
Cool
Clean
Air Med
Dry
Fan High
Mode
Fan
Follow
Me
Energy
On/Off
Saver
TO SELECT THE
OPERATING MODE:
Auto
Auto
Low
Cool
Clean
Air
Med
Dry
Fan High
Mode
Fan
Follow
Me
Energy
On/Off
Saver
DO THIS:
Press to raise
Press to lower
DO THIS:
Press to select
appropriate fan
speed
DO THIS:
Press the MODE
button.
NOTE:
Press or hold either LEFT( <) or RIGHT (>) button
until the desired temperature
display. This temperature will be automatically
maintained anywhere between 62 F(17 C) and
86 F(30 C). If you want the display to read the
actual room temperature, see To Operate on
Fan Only section.
NOTE:
Used to select the Fan Speed in four steps-
AUTO, LOW, MED or HIGH. Each time the
button is pressed, the fan speed mode is shifted.
For some models, the fan speed can not be
adjusted in HEAT mode. On DRY mode, the fan
speed is set to LOW automatically.
NOTE:
To select mode, press the Mode button. Each time
you press the button, the mode will change based
on the sequence from AUTO, COOL, DRY and FAN.
The indicator light will show the mode selected.
To operate on Auto feature:
When you set the air conditioner to AUTO mode, it will
automatically select cooling, heating (not available in
Cooling-only models), or fan only operation depending
on the temperature selected and the current room
temperature.
The air conditioner will adjust room temperature auto-
matically to the approximate temperature point set.
In this mode, the fan speed cannot be adjusted,
as the fan speed is being controlled automatically.
To operate on Fan Only:
Use this function only when cooling is not desired,
such as for room air circulation or to exhaust stale
air(only on some models). (Remember to open the
vent during this function, but keep it closed during
cooling for maximum cooling efficiency.) You can
choose any fan speed you prefer. .
6
is shown on the