Starting Meshtray; Procedure 4-1 Starting Meshtray; Procedure - Motorola WMC7300715 User Manual

Chapter 4: MeshTray
Excellent IAP Association
(Infrastructure mode)
Very Good IAP Association
Medium IAP Association
Poor IAP Association
Very Poor IAP Association

Starting MeshTray

During the software installation process, you can choose to run MeshTray immediately upon
completion of the installation process.

Procedure 4-1

Starting MeshTray
1 To start the MeshTray application, double-click on the MeshTray icon located on the desktop.
The icon will be available on the desktop only if the election to place it on the desktop has been selected
at the time of MeshTray installation.
2 As an alternative to the above step, you can also:
Click on Start | Programs | Motorola | MotoMesh | MeshTray.exe.
As an alternative to the previous steps, you can also:
3
Click on the MeshTray icon in the Windows System Tray to restore the application to a property sheet
(tab-style) interface as shown in
6881011Y52-D January 2007
When the WMC is associated with an IAP (not peer-to-peer), the
MeshTray icon displays the Link Quality to the associated IAP as
color-coded bars. The greater the number of bars, the better the
Link Quality.
Same explanation as listed for the Excellent IAP icon, except that
the IAP link quality is measured to be Very Good.
Same explanation as listed for the Excellent IAP icon, except that
the IAP link quality is measured to be Medium.
Same explanation as listed for the Excellent IAP icon, except that
the IAP link quality is measured to be Poor
Same explanation as listed for the Excellent IAP icon, except that
the IAP link quality is measured to be Very Poor.
Figure 4-1
4-2