Table of Contents
Related Manuals for Samsung WA45M7050AW
Summary of Contents for Samsung WA45M7050AW
- Page 1 WA50M7450A* WA45M7050A* Washing Machine user manual imagine the possibilities Thank you for purchasing this Samsung product. WA7000M-03774A-00_EN+CFR+MES.indb 1 WA7000M-03774A-00_EN+CFR+MES.indb 1 11/18/2016 12:58:54 PM 11/18/2016 12:58:54 PM...
-
Page 2: Table Of Contents
contents INSTALLING YOUR WASHER Unpacking your washer Overview of your washer Basic location requirements Electrical Grounding Water Drain facility Flooring Location considerations Alcove or closet installation Required dimensions for Installation Important note to installer Installation fl ow chart OPERATING INSTRUCTIONS Loading your washer Getting started WASHING A LOAD OF LAUNDRY... - Page 3 Congratulations on your new Samsung Washer. This manual contains important information on the installation, use, and care of your appliance. Please take time to read this manual to take full advantage of your washer’s many benefi ts and features.
- Page 4 safety information WARNING WARNING State of California Proposition 65 Warning (US only) This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. IMPORTANT SAFETY PRECAUTIONS WARNING To reduce the risk of fi re, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1.
- Page 5 CRITICAL INSTALLATION WARNINGS WARNING Plug the power cord into an AC 120 V / 60 Hz/wall socket rated at 15 amps or higher. Use the socket for this appliance only. In addition, do not use an extension cord. - Sharing a wall socket with other appliances, using a power strip, or extending the power cord may result in electric shock or fi...
- Page 6 safety information INSTALLATION CAUTIONS CAUTION Position the appliance so that the power plug is easily accessible. - Failing to do so may result in electric shock or fi re due to electric leakage. Install your appliance on a level and hard fl oor that can support its weight. - Failing to do so may result in abnormal vibrations, noise, or problems with the product.
- Page 7 Do not touch the power plug with wet hands. - This may result in electric shock. Do not turn the appliance off by unplugging the power plug while the washer is in operation. - Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fi...
- Page 8 safety information Insert the laundry into the washer completely so that laundry does not get caught in the lid. - If laundry gets caught in the lid, it may result in damage to the laundry or the washer, or result in water leakage. Ensure that the faucet is turned off when the washer is not being used.
- Page 9 Do not place any non-laundry objects, such as shoes, food waste, or animals into the washer. - This can cause abnormal vibrations that can damage the washer, and, in the case of pets, cause severe injury or death. Do not press the buttons using sharp objects such as pins, knifes, fi ngernails, etc. - This may result in electric shock or injury.
-
Page 10: Installing Your Washer
Measuring tape Parts not supplied • If you lose an accessory and want to purchase a replacement, contact the Samsung service center (1-800-SAMSUNG (1-800-726-7864)). • The design of the parts and accessories may diff er from the pictures above. Their design is subject to change without notice for product improvement. -
Page 11: Basic Location Requirements
BASIC LOCATION REQUIREMENTS Electrical • 120 Volt 60 Hz 15 AMP fuse or circuit breaker. • Individual branch circuit serving only your Washer is recommended. • Your Washer is equipped with a power cord. NEVER USE AN EXTENSION CORD. CAUTION Grounding ELECTRICAL GROUNDING IS REQUIRED FOR THIS APPLIANCE. -
Page 12: Drain Facility
installing your washer Drain facility The recommended height of the standpipe is 39 in / 99 cm. The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose. -
Page 13: Required Dimensions For Installation
Required dimensions for Installation WA45M7050A* 29.3 in. (74.4 cm) 43.9 in. 43.9 in. (111.5 cm) 39.3 in. (111.5 cm) (99.8 cm) 29.3 in. 27.0 in. (74.4 cm) (68.6 cm) 3 in. (7.6 cm) 48 in.² * (310 cm²) 58.1 in. (147.6 cm) 24 in.²... -
Page 14: Important Note To Installer
installing your washer IMPORTANT NOTE TO INSTALLER Please read the following instructions carefully before installing your washer. These instructions should be retained for future reference. We recommend you hire a professional to install this washer. Installation fl ow chart Removing the Selecting Connecting the water Adjusting the... - Page 15 1. Connect the ends of the water supply hoses to the HOT and COLD faucets. 2. Tighten the fi ttings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a plier. When you fasten the fi ttings, do not fasten them too tightly or apply tape or sealant to the faucets or water supply intakes.
- Page 16 installing your washer Connecting the drain hose The end of the drain hose can be positioned in three ways: In a Wall standpipe or Floor standpipe The height of end of standpipe must be no lower than 39 in (99 cm) and no higher than 96 in (245 cm).
- Page 17 15 for instructions. STEP 6 Calibration mode Your Samsung washing machine detects the laundry weight automatically. For more accurate weight detection, please run Calibration Mode after the installation. To run Calibration Mode, follow these steps: 1.
-
Page 18: Operating Instructions
operating instructions WARNING: To reduce the risk of fi re, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: WARNING LOADING YOUR WASHER • Fill the tub with dry, unfolded clothes evenly around in order to enhance washing effi ciency and prevent excess wear, or wrinkling of the load. -
Page 19: Washing A Load Of Laundry
washing a load of laundry OVERVIEW OF THE CONTROL PANEL WA50M7450A* WA45M7050A* Select the appropriate cycle for the type of load. The cycle you select determines the tumble pattern and spin speed for the cycle. To minimize wrinkling of laundry, select the PERM PRESS cycle. NORMAL - For most fabrics including cottons, linens, and normally soiled garments. - Page 20 washing a load of laundry PERM PRESS - For wash-and-wear, synthetic fabrics, and lightly to normally soiled garments. ACTIVE WEAR (WA50M7450A*) - Use this cycle to wash exercise wear such as sports jerseys, training pants, shirts/tops and other performance clothing. This cycle provides eff ective soil removal with gentle action for special fabric care.
-
Page 21: Child Lock [ ]
Child Lock [ ] Child Lock prevents children from playing with your washer. Activating the Child Lock function Press and hold the Spin and Soil Level buttons simultaneously for approximately 3 seconds. • When you activate the Child Lock function, the “Child Lock [ ]”... -
Page 22: Sound
washing a load of laundry Sound The Sound Off function can be selected during all cycles. Garment You can add or take out laundry items even after the wash has started, as long as the “Garment” light is on. Pushing the Start/Pause button unlocks the lid. If you open the lid and want to continue the wash cycle, close the lid, and then press the Start/Pause button. -
Page 23: Mist Shower
Smart Care app. Downloading the Smart Care app • Download the Samsung Laundry App into your mobile phone from the Android market or Apple App store. (Search word : Samsung Smart Washer/Dryer) Precautions when using Smart Care •... -
Page 24: Washing Clothes Using The Cycle Selector
Washing clothes using the cycle selector Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control” automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed. -
Page 25: Detergent Use
DETERGENT USE Your washer is designed to use high effi ciency (HE) detergents. • For best cleaning results, use high effi ciency detergent such as Tide HE, Wisk HE, Cheer HE or Gain HE*. High effi ciency detergents contain suds suppressors that reduce or eliminate suds. When fewer suds are produced, the load tumbles more effi ciently and cleaning is maximized. - Page 26 washing a load of laundry Loading the Liquid (or Powder) detergent compartment 1. Pour the recommended amount of laundry detergent Liquid detergent directly into the detergent compartment before starting compartment your washer. 2. If you are using color-safe bleach, add it with the detergent to the detergent compartment.
- Page 27 Loading the Fabric softener compartment 1. Pour the recommended amount of liquid fabric softener Fabric softener into the softener compartment. compartment For smaller loads, use less than one capful. 2. Dilute the fabric softener with water until it reaches MAX FILL in the compartment.
-
Page 28: Maintaining Your Washer
maintaining your washer CLEANING THE EXTERIOR Turn off the water faucets after fi nishing the day’s washing. This will shut off the water supply to your washer and prevent the unlikely possibility of damage from escaping water. Leave the lid open to allow the inside of your washer to dry out. Use a soft cloth to wipe up all detergent, bleach or other spills as they occur. -
Page 29: Cleaning The Dispensers
CLEANING THE DISPENSERS The automatic dispenser may need to be cleaned periodically due to laundry additive buildup. 1. Pull the dispenser drawer straight back until it stops. 2. Tilt the dispenser drawer upward and remove it. 3. Remove the inserts from the 3 compartments. Rinse the inserts and the drawer with warm water to remove traces of accumulated laundry products. -
Page 30: Self Clean
maintaining your washer SELF CLEAN WA50M7450A* Self Clean is a self-cleaning cycle that removes mold that may occur inside the washing machine. 1. Press the Power button. 2. Select the Self Clean cycle. • Once the Self Clean cycle is selected, the only function that can be set is Delay End. -
Page 31: Troubleshooting
troubleshooting CHECK THESE SOLUTIONS IF YOUR WASHER… PROBLEM SOLUTION Will not start. • Make sure the lid is closed. • Make sure your washer is plugged in. • Make sure the water source faucets are open. • Make sure to press the Start/Pause button to start your Washer. •... - Page 32 troubleshooting PROBLEM SOLUTION Fills with the wrong • Turn both faucets on fully. temperature water. • Make sure the temperature selection is correct. • Make sure the hoses are connected to the correct faucets. Flush water lines. • Disconnect the hoses and clean the screens. The hose fi lter screens may be plugged.
-
Page 33: Information Codes
INFORMATION CODES The Washer may display information codes to help you understand what is occurring with your Washer better. CODE SYMBOL MEANING SOLUTION Unbalanced load prevents washer Redistribute the load, and then press the Start/ from spinning. Pause button. Make sure the door is fi rmly closed. Restart the The washer did not properly lock dC/dC1 washer. - Page 34 Additional rinsing. Any key input. • Show additional rinsing in sensing unbalance. • Method of releasing the display. For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG). English - 34 WA7000M-03774A-00_EN+CFR+MES.indb 34 WA7000M-03774A-00_EN+CFR+MES.indb 34 11/18/2016 12:59:13 PM 11/18/2016 12:59:13 PM...
-
Page 35: Appendix
appendix FABRIC CARE CHART The following symbols provide garment care direction. The Clothing care labels include symbols for washing, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to maximize garment life and reduce laundering problems. -
Page 36: Cycle Chart
appendix CYCLE CHART Use this chart to set the best cycle and options for you laundry. WA50M7450A*, WA45M7050A* : factory setting, : selectable) Functions Temp. Spin Soil level Course Warm Cool Cold High Medium No spin Heavy Normal Light Warm ... -
Page 37: Helping The Environment
HELPING THE ENVIRONMENT • Your washer is manufactured from recyclable materials. If you decide to dispose of it, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the lid so that animals and small children cannot get trapped inside the appliance. -
Page 38: English
SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specifi... - Page 39 NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER...
- Page 40 SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specifi...
- Page 41 NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER...
- Page 42 memo WA7000M-03774A-00_EN+CFR+MES.indb Sec11:42 WA7000M-03774A-00_EN+CFR+MES.indb Sec11:42 11/18/2016 12:59:14 PM 11/18/2016 12:59:14 PM...
- Page 43 memo WA7000M-03774A-00_EN+CFR+MES.indb Sec11:43 WA7000M-03774A-00_EN+CFR+MES.indb Sec11:43 11/18/2016 12:59:14 PM 11/18/2016 12:59:14 PM...
- Page 44 DC68-03774A-00 Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. WA7000M-03774A-00_EN+CFR+MES.indb Sec11:44 WA7000M-03774A-00_EN+CFR+MES.indb Sec11:44 11/18/2016 12:59:14 PM 11/18/2016 12:59:14 PM...
Need help?
Do you have a question about the WA45M7050AW and is the answer not in the manual?
Questions and answers
Lint on clothes after wasing.
Lint on clothes after washing with the Samsung WA45M7050AW may be caused by selecting an incorrect wash cycle for the fabric type. For example, using a cycle not suited for delicate or lint-prone fabrics can increase lint transfer. To minimize lint, use the PERM PRESS cycle to reduce wrinkling and friction, and separate lint-producing items (like towels) from lint-attracting items (like synthetics). Also, using the wrong amount or type of detergent may contribute to lint buildup.
This answer is automatically generated
My washer is stopping, like I pushed pause, but I did not, and then when I push the start button it locks and continues where it left off. This happened 3 times today with different loads and no we did not have any power outages.
The Samsung WA45M7050AW washer could stop unexpectedly and require a restart due to the following reasons:
1. Unbalanced Load (Ub code): If the washer detects an unbalanced load, it may stop. Redistribute the load and press the Start/Pause button to resume.
2. Door Not Properly Locked (dC/dC1/dC3/ddC codes): If the washer does not properly lock the door or the Add Door is open, it may stop. Ensure all doors are firmly closed and restart the washer.
3. Drainage Issue (5C code): A clog may prevent the washer from draining. Restart the washer, select the Spin Only cycle, and press Start/Pause to drain. If the issue continues, service may be needed.
4. Water Supply Problem (4C code): If water is not being supplied due to closed or clogged taps or hoses, or low water pressure, the washer may stop. Check water supply conditions.
5. Child Lock Activation: If the lid is opened while Child Lock is on and the water level is high, the washer may stop and begin forced draining after 30 seconds.
6. Cycle Canceled: Pressing the Power button cancels the current cycle and stops the washer.
This answer is automatically generated