Kenwood NEXEDGE NX-200S Instruction Manual page 35

STATUS MESSAGE
decided in your talk group. Messages can contain up to 16
alphanumeric characters.
stack memory of your transceiver.
Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as Status to enter Status
3 Press
• You can enter a station ID by using the DTMF keypad, or
by using
4 Press
5 Press
• You can enter a status ID by using the DTMF keypad, or by
using
6 Press the key programmed as Call 1 to Call 6 to initiate
the call.
Receiving
is received. Press any key to return to normal operation.
Reviewing Messages in the Stack Memory
1 Press the key programmed as Stack to enter Stack mode.
• The last received message is displayed.
2 Press
• Press and hold
.
to enter Status mode.
to select the desired message.
for 1 second or press
Selcall + Status to enter
to cycle the