Table of Contents
Advertisement
6. CONSUMPTION VALUES
At programme start the display shows the duration programme for the maxi-
mum load capacity.
During the washing phase the programme duration is automatically calculated
and can greatly be reduced if the laundry load is lower than the maximum load
capacity (e.g. Cotton 60°C, maximum load capacity 7 kg, the programme du-
ration exceeds 2 hours; real load 1 kg, the programme duration don't reach 1
hour).
When the appliance is calculating the real programme duration a dot blinks in
the display.
Programme
Cottons 60°
Cotton Energy Saving Pro-
gramme 60°
Cottons 40°
Synthetics 40°
Delicates 40°
Wool/ Handwash 30°
1) «Cotton Energy Saving programme » at 60°C with a load of 7 kg is the reference
programme for the data entered in the energy label, in compliance with EEC 92/75
standards.
The consumption data shown on
this chart is to be considered
purely indicative, as it may vary
depending on the quantity and
type of laundry, on the inlet water
temperature and on the ambient
temperature.
7. OPTIONS
7.1 Temperature
Set this option to change the default tem-
perature.
Indicator
The display shows the set temperature.
7.2 Spin
With this option you can change the de-
fault spin speed.
The indicator of the set speed comes on.
Energy con-
sumption
(KWh)
1)
= cold water.
Water con-
sumption
(litres)
1.25
1.02
0.78
0.47
0.53
0.25
Additional spin options:
No Spin
• Set this option to deactivate all spin
phases. Only the drain phase is availa-
ble.
• The related indicator comes on.
• Set this option for very delicate fabrics.
• The rinses phase uses more water for
some washing programmes.
Rinse Hold
• Set this option to prevent the laundry
creases.
ENGLISH
Programme
duration
(minutes)
70
For the dura-
53
tion
of the pro-
grammes,
70
please refer
50
to the display
on the control
62
panel.
45
11
Advertisement
Table of Contents
