Table of Contents
Advertisement
4 - 28 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual
•
Under My Work Network, tap on Add a new VPN server connection.
•
In the Name field, type a name for this connection.
•
In Host name/IP, type the VPN server name or IP address.
•
Tap on the VPN type radio button next to the type of authentication for your Workabout Pro4: IPSec/L2TP
or PPTP. Your network administrator will let you know which option applies to your unit.
•
Tap on Next.
•
Choose the type of authentication in this screen. If you choose A pre-shared key, type the key provided by
your network administrator.
•
Tap on Next.
•
Type your user name, password and domain name. If a domain name was not provided to you, try the
connection without entering a domain name.
NOTE
Normally, you will not need to change any advanced settings. You will need to make
changes only under only the following circumstances:
- The server to which you are connecting does not dynamically assign addresses, and
TCP/IP settings need to be entered.
- Server DNS or WINS settings need to be changed.
If you need to edit the Advanced settings, refer to
this tab.
•
Tap on Finish.
•
Launch a program like Internet Explorer to activate the connection. The VPN connection will
start automatically.
Managing an Existing Connection
Once you've defined a connection, a new option appears in the first Connections screen – Manage
existing connections.
Editing a Connection
•
Tap on Start>Settings>Connections folder icon. Tap on the Connections icon.
•
Tap on Manage existing connections.
Draft #6
"Advanced Modem Settings" on page 4-24
for details about
Advertisement
Table of Contents
