Samsung 200B4A User Manual page 62

Connecting an External Display Device
Connecting to the monitor port
You can experience a wider screen by connecting the computer to
a monitor, TV or projector with a monitor port.
You can give better presentations by connecting the computer to
a projector.
1
Connect the RGB port of the computer and the port of the
monitor or TV with the monitor cable (15 pin).
External
Monitor
2
Connect the power cord of the connected monitor, TV or
projector and turn the power on.
TV
Projector
3
Press the Fn + F4 key combination once. Then the Easy
Display Manager screen appears where you can select a
display device.
Since pressing the F4 key while holding down the Fn key
changes the selection, select a display device.
If the screen is not switched even if you press the Fn +
F4 key combination, you have to install the Easy Display
Manager program.
External Monitor / TV is not supported in the DOS
Command Prompt window.
Chapter 2.
61
Using the computer