Advertisement
11) Open ADF unit and reader unit [1]. Remove boss [2] from left cover [3].
12) Remove left cover [3].
Memo
For attachment, attach left cover [1] aligning with four protrusions [2] on the left
bottom cover.
13) After removing the left cover, put the main body at the center of the
workbench.
14) Remove connector [1] from the counter board.
Wire saddle [2]
15) Remove controller cover [1].
Six screws [2] (Removed screws are used in step 19).)
Hook [3]
1-5
1-5
Advertisement
