About Bluetooth - Panasonic RP-BTS35E Operating Instructions Manual

Digital wireless stereo earphones
Table of Contents

Advertisement

• Do not pour soap water or detergent, or immerse in water.
• Remove any hair, lint, sand, dust, etc., that may be attached to the rubber seal on the USB lid before closing.
• Leaving the device with water droplets in a cold region may result to malfunction such as the USB lid stuck
closed.
• The sound may become smaller or distorted when water is accumulated in the earphones or microphone of
this unit. Wipe this unit with dry soft cloth.
• When water enters inside this unit, stop using this unit, and contact the nearest Dealer or Service Centre.
Malfunction due to exposure to water by improper handling by the customer will not be covered by the
warranty. Supplied USB charging cord is not water resistant.

About Bluetooth

Panasonic bears no responsibility for data and/or information that is compromised during a wireless
transmission.
∫ Frequency band used
This unit uses the 2.4 GHz frequency band.
∫ Certification of this unit
• This unit conforms to frequency restrictions and has received certification based on frequency laws. Thus, a
wireless permit is not necessary.
• The actions below are punishable by law in some countries:
– Taking apart/modifying this unit.
– Removing specification indications.
∫ Restrictions of use
• Wireless transmission and/or usage with all Bluetooth
• All devices must conform to standards set by Bluetooth SIG, Inc.
• Depending on the specifications and settings of a device, it can fail to connect or some operations can be
different.
• This unit supports Bluetooth
this security may not be sufficient. Transmit data wirelessly to this unit with caution.
• This unit cannot transmit data to a Bluetooth
∫ Range of use
Use this unit at a maximum range of 10 m.
The range can decrease depending on the environment, obstacles or interference.
∫ Interference from other devices
• This unit may not function properly and troubles such as noise and sound jumps may arise due to radio wave
interference if this unit is located too close to other Bluetooth
band.
• This unit may not function properly if radio waves from a nearby broadcasting station, etc. is too strong.
∫ Intended usage
• This unit is for normal, general use only.
• Do not use this system near an equipment or in an environment that is sensitive to radio frequency
interference (example: airports, hospitals, laboratories, etc).
®
®
security features. But depending on the operating environment and/or settings,
®
device.
®
equipped devices is not guaranteed.
®
devices or the devices that use the 2.4 GHz
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rp-bts35Rp-bts35e-k

Table of Contents